Requested Control Unit not found

ellinara · 06-26-2015, 11:05 AM

Hi everyone,

I am sorry for posting this here but I have ran out of options and I was hoping that maybe someone might be able to help me. I have a european MCS 2008 and I am having an issue with INPA reading the N14 ECU. When I choose the engine I receive the message attached.

Requested control unit: 'MED17_2' not found
Control unit found: 'MED17_2N'.
Program will be stopped.

I have updated my datens to 55.4 using BMW coding tool.

The software works flawlessly on my E92 and I am successful in coding both cars.

Any help would be much appreciated.

Thanks for your help.

eriiiksson · 06-27-2015, 02:39 AM

Try this:

In your e90.eng and e90.ger files, find the line of the existing module, should be something like this

Entry= MED17_2, xxxxxxxx,

where xxxxx just is the text displayed, add a new line right under where it says

Entry= MED17_2N, xxxxxxxx,

worked for me when INPA requested frm_87 and I had frm_70 (NFRM) on my car, also added FLA_65 in INPA this way.

ellinara · 06-27-2015, 06:40 AM

Hi Thanks for your help!!!

I did what you told me and now I am getting an error compiling script. All my datens are up to date (2.55.4).

eriiiksson · 06-28-2015, 03:10 PM

You could also be missing the correct .ipo file for that ecu. Seems to be a common issue.

Daten doesnt update .ipo files in INPA, it mostly updates ncs and winfkp, correct me if I'm wrong.

06-26-2015, 11:05 AM	#1
ellinara Enlisted Member 11 Rep 41 Posts Drives: 08 E92 335i/08 R56 Cooper S Join Date: Apr 2012 Location: Toronto, Ontario iTrader: (0)	Requested Control Unit not found Hi everyone, I am sorry for posting this here but I have ran out of options and I was hoping that maybe someone might be able to help me. I have a european MCS 2008 and I am having an issue with INPA reading the N14 ECU. When I choose the engine I receive the message attached. Requested control unit: 'MED17_2' not found Control unit found: 'MED17_2N'. Program will be stopped. I have updated my datens to 55.4 using BMW coding tool. The software works flawlessly on my E92 and I am successful in coding both cars. Any help would be much appreciated. Thanks for your help. Attached Images __________________ 94 BMW E36 320iA RIP 07 BMW E92 328xi RIP 08 BMW E92 335i 08 MINI R56 Cooper S
	Appreciate 0 Tweet Quote

06-27-2015, 02:39 AM	#2
eriiiksson New Member 2 Rep 16 Posts Drives: e91 320d -08 Join Date: Apr 2015 Location: Sweden iTrader: (0)	Try this: In your e90.eng and e90.ger files, find the line of the existing module, should be something like this Entry= MED17_2, xxxxxxxx, where xxxxx just is the text displayed, add a new line right under where it says Entry= MED17_2N, xxxxxxxx, worked for me when INPA requested frm_87 and I had frm_70 (NFRM) on my car, also added FLA_65 in INPA this way.
	Appreciate 1 Quote

06-27-2015, 06:40 AM	#3
ellinara Enlisted Member 11 Rep 41 Posts Drives: 08 E92 335i/08 R56 Cooper S Join Date: Apr 2012 Location: Toronto, Ontario iTrader: (0)	Hi Thanks for your help!!! I did what you told me and now I am getting an error compiling script. All my datens are up to date (2.55.4). __________________ 94 BMW E36 320iA RIP 07 BMW E92 328xi RIP 08 BMW E92 335i 08 MINI R56 Cooper S
	Appreciate 0 Quote

06-28-2015, 03:10 PM	#4
eriiiksson New Member 2 Rep 16 Posts Drives: e91 320d -08 Join Date: Apr 2015 Location: Sweden iTrader: (0)	You could also be missing the correct .ipo file for that ecu. Seems to be a common issue. Daten doesnt update .ipo files in INPA, it mostly updates ncs and winfkp, correct me if I'm wrong.
	Appreciate 0 Quote