|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
[MELB] M3 DCT Instrument cluster
|
|
05-28-2018, 08:07 PM | #1 |
Brigadier General
1492
Rep 3,148
Posts |
[MELB] M3 DCT Instrument cluster
Up for sale is an M3 instrument cluster with correct specification for Australian cars (KPH and Celcius)
These are direct fit into non M 3 series vehicles (all e9x cars). Looks a lot nicer than the stock one and is quite rare to see these pop up. The redline indicator gauge automatically adjusts when the engine is cold and when fitted to an N54, correctly moves to 7000rpm. The DCT lights do not work on the non M cars as it needs the S65 DME $600 + postage If needed I am capable of install (at extra cost) as these things require the internal memory chip to be reprogrammed with your VIN. This requires disassembly of the cluster so can be quite difficult to find an installer. The result would be a proper retrofit with no tamper dot and correct kms, and coded correctly for your vehicle spec. I would be unable to do this remotely so can only do this for people in Melbourne
__________________
|
07-15-2018, 06:39 PM | #3 |
Brigadier General
1492
Rep 3,148
Posts |
bump, will write the EEPROM with the buyers vin, so all you need to do is to code the cluster and calibrate the needles (needles are taken off when the EEPROM chip is rewritten)
This should make it possible for anyone who is familiar with coding to DIY the install
__________________
|
Appreciate
0
|
08-01-2018, 11:19 PM | #4 |
Brigadier General
1492
Rep 3,148
Posts |
bump
__________________
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|