[adammcf]

Originally Posted by MrSweet1991

Hi Adam,
Also, it might be worth having a quick check of the cylinder head connector, the gasket has a tendency to fail and it seeps coolant.. it's only £18 for the cylinder head connector and gasket from bmw.

Which part is that? The head gasket?

I changed the glow plug module last year when I did the two thermostats and I went from 6 glow plug errors down to 4 so I'll be changing all 6 of them while I've got the manifold off.
Hopefully it should run sweet as a nut when all this is done although it went pretty good anyway.

[MrSweet1991]

Originally Posted by adammcf

Which part is that? The head gasket?

I changed the glow plug module last year when I did the two thermostats and I went from 6 glow plug errors down to 4 so I'll be changing all 6 of them while I've got the manifold off.
Hopefully it should run sweet as a nut when all this is done although it went pretty good anyway.

Hi mate,

It's number 11 in the diagram, and you're not wrong it will be a solid engine once done

http://www.realoem.com/bmw/enUS/show...65#11127806196

[adammcf]

Originally Posted by MrSweet1991

Hi mate,
It's number 11 in the diagram, and you're not wrong it will be a solid engine once done
http://www.realoem.com/bmw/enUS/show...65#11127806196

Ah got you now. Mine is ok at the minute. I'll change it the next time I'm doing the coolant. Cheers for pointing it out.