[yuggy]

anyone have problems making the spacer fit properly on the brake rotor?
I tried putting a 15mm spacer but wouldn't sit flush against the rotor.
Been reading on the forum about using sandpaper to sand maybe some of the rust/corrosion that's causing it to not sit flush?

there's no difference between spacers for the XI correct? i was pretty sure there's no difference between a spacer that fits on the 325i and 325xi...

[roflcivic]

about to put on new wheels, but my friend said that after putting spacers on the 335Xi coupe, it will causes a sensor to light up and then the car malfunctions?

anyone know what is going on?

Wheel set-up is

235/35/19 front and
265 or 275/30/19 rear

19x8.5 ET 38 + 5mm spacer front
19x9.5 ET 45 + 10mm spacer rear

help is appreciated.

[ECSTuning]

We have a selection of wheel spacers available from H&R, as well as our in house ECS spacers. We also have a large selection of extended wheel bolts and stud conversions available. Everything can be found here on our website:

http://www.ecstuning.com/BMW-E92-335...aign=postreply

[ium3]

Originally Posted by roflcivic

about to put on new wheels, but my friend said that after putting spacers on the 335Xi coupe, it will causes a sensor to light up and then the car malfunctions?

anyone know what is going on?

Wheel set-up is

235/35/19 front and
265 or 275/30/19 rear

19x8.5 ET 38 + 5mm spacer front
19x9.5 ET 45 + 10mm spacer rear

help is appreciated.

Thats really strange, i put spacers on my e92 328xi and no problem

[reprod]

Any e92s running 12mm H&R spacers with a drop? Thinking about some coilovers but dont want to have to ditch the spacers.....