|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Cluster Eeprom orientation
|
|
08-13-2018, 02:42 PM | #1 |
Sua Sponte
1295
Rep 2,842
Posts
Drives: 2013 LMB 335is
Join Date: May 2008
Location: FOB FL
|
Cluster Eeprom orientation
Sensible_ Levanime or anyone else that may know. So I was successful in removing the chip with a hot air station, reading with the R270, editing the bin, and writing back. Now for a rookie error, how is the chip oriented on the board? I didn't note the orientation and I don't want to solder it on upside down. So if the bottom of the PCB (LCD side) is on the left, top of the PCB is on the right, left end is top and right end is bottom, would the chip numbers be readable left to right as normal or upside down? I know which is pin 1 on the chip but not the board.
__________________
335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding
|
08-13-2018, 07:16 PM | #2 |
Sua Sponte
1295
Rep 2,842
Posts
Drives: 2013 LMB 335is
Join Date: May 2008
Location: FOB FL
|
Sorted
__________________
335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding
|
Appreciate
0
|
08-13-2018, 11:18 PM | #3 |
E82 Mudflap Ambassador
2212
Rep 2,219
Posts
Drives: '08 128i
Join Date: May 2016
Location: Orlando, FL
|
__________________
My 2008 128i - Sparkling Graphite/Beige - Sport pkg - 6MT - Click me!
Parents' 2014 528i - Mineral White/Ivory White - fully loaded Instagram @Andreys_128i and @Honda.Bito |
Appreciate
0
|
08-14-2018, 08:29 AM | #4 |
Sua Sponte
1295
Rep 2,842
Posts
Drives: 2013 LMB 335is
Join Date: May 2008
Location: FOB FL
|
With the PCB oriented as I described the eeprom would be upside down in this case. I can't say that's the case across the board though. I'll be taking a pic from now on to document it.
__________________
335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|