[GEOS07335i]

Next mod is going to be Stage 2 LPFP (Walbro 450) so I can run an E40 - E60 mix.

I have an o8 with 7"FMIC, DP's,DCI and running MHD Stage 2+.

I know of three options wondering if I missed one.

Option 1) $405 Fuel-It http://www.fuel-it.com/e-series-stage-2-lpfp-upgrade/

Option 2) $350 Boost Concepts https://boostconcepts.net/products/f...5-pump-upgrade

Option 3) DIY $200+

Are there any other options that I'm not aware of?

[Haynpunch]

http://www.eurotuninggroup.com/produ...x-e8x-n54-n55/

https://vadersolution.com/products/v...series-n54-n54

https://vadersolution.com/products/v...w400-fuel-pump

[Midwest_Xi]

Fuel-it bucketless

$399 no core- outflows bucketed setups by -25%

No brainer imo + backed with knowledge, & Support.

[GEOS07335i]

Originally Posted by Midwest_Xi

Fuel-it bucketless

$399 no core- outflows bucketed setups by -25%

No brainer imo + backed with knowledge, & Support.

Does this option support emix?

[diolev]

what you gonna do op? I'm in the same boat, but might do the sensor too.

[GEOS07335i]

Originally Posted by diolev

what you gonna do op? I'm in the same boat, but might do the sensor too.

Not sure yet. I'm getting a dyno in the couple of weeks and see where my power levels are. I have several gas stations near me that have E85 so that's good.

However I'm not sure witch direction I'm going to take. I want it cheap and fairly easy swap and will run probably the E40 mix.

A couple of the members at our local club suggested some smaller vendors out of FL (paul parks) that would be equivalent to what Fuel-It STAGE 2 for a bit less. Still doing some research.

What have you found or what direction are you going? My goals are to run mid to low 12's on street tires with an AUTO so I'm guessing I'll need to be in the 450+rwp range with the E40 mix.

[LoneWolfPistol]

Originally Posted by GEOS07335i

Not sure yet. I'm getting a dyno in the couple of weeks and see where my power levels are. I have several gas stations near me that have E85 so that's good.

However I'm not sure witch direction I'm going to take. I want it cheap and fairly easy swap and will run probably the E40 mix.

A couple of the members at our local club suggested some smaller vendors out of FL (paul parks) that would be equivalent to what Fuel-It STAGE 2 for a bit less. Still doing some research.

What have you found or what direction are you going? My goals are to run mid to low 12's on street tires with an AUTO so I'm guessing I'll need to be in the 450+rwp range with the E40 mix.

Any update or info on the decision you made. Also where can I find paul parks?

[Silent9n54]

i have been running e40 mix at 21.5 psi on stock lpfp for a year now. Might as well tune for e60 if you are getting a stage 2 pump...

mid 12s are easily achievable with any E mix on our cars

2007 E92 335i / VRSF 5" FMIC - Downpipes - Charge Pipe - DCI / TurboSmart Plumb Back DV / XHP Stage 3 / E40 Custom Tune by Wedge / APEX ARC8 / Michelin PS4S / 11.95 @ 116 / Instagram.com/silent11n54

Originally Posted by GEOS07335i

Not sure yet. I'm getting a dyno in the couple of weeks and see where my power levels are. I have several gas stations near me that have E85 so that's good.

However I'm not sure witch direction I'm going to take. I want it cheap and fairly easy swap and will run probably the E40 mix.

A couple of the members at our local club suggested some smaller vendors out of FL (paul parks) that would be equivalent to what Fuel-It STAGE 2 for a bit less. Still doing some research.

What have you found or what direction are you going? My goals are to run mid to low 12's on street tires with an AUTO so I'm guessing I'll need to be in the 450+rwp range with the E40 mix.

[GEOS07335i]

Paul parks can be found on Facebook. I haven't done mine yet. I've got to take off my motor mounts first.

[N54Society]

I have a stage 2 lpfp from Paul Parks. Installation was a bit wonky due to the long hose he uses to connect the gas tank to the lpfp but with some bending, you can install it. Also, the crimped wires that came with my bucket came undone. Thank god I saw them loosened up before installing the bucket.

[DiFFv1]

Anyone still need a walbro 450 pump or the plug n play kit contact me $275

[N54Society]

Originally Posted by DiFFv1

Anyone still need a walbro 450 pump or the plug n play kit contact me $275

Got any pics? Testimonials? What name do you go by? That's a hell of a price.

[DiFFv1]

Originally Posted by vbp6us

Got any pics? Testimonials? What name do you go by? That's a hell of a price.

Pictures ? Sure PM or look at my posts. Testimonials? Funny guy is this a BMW dealership? Name do i go by? Diffv1 , Also i couldnt find where i put my company name or business LLC , And i dont believe you have done your proper research sir because stage 2 kits vary from 250-450+ Range. The Fuel pump alone 100-150. Have a seat and good day sir

[N54Society]

Originally Posted by DiFFv1

Pictures ? Sure PM or look at my posts. Testimonials? Funny guy is this a BMW dealership? Name do i go by? Diffv1 , Also i couldnt find where i put my company name or business LLC , And i dont believe you have done your proper research sir because stage 2 kits vary from 250-450+ Range. The Fuel pump alone 100-150. Have a seat and good day sir

Here's $275..oh wait you sound like scammer with your 45 posts. No pics, no proof, no thanks. Omg, what a concept, consumers asking for proof that there is actually a product behind your words and claims.

I was saying your price is good but reading comprehension might not be your strong suit so disregard that too.

[DiFFv1]

Originally Posted by vbp6us

I have a stage 2 lpfp from Paul Parks. Installation was a bit wonky due to the long hose he uses to connect the gas tank to the lpfp but with some bending, you can install it. Also, the crimped wires that came with my bucket came undone. Thank god I saw them loosened up before installing the bucket.

Says the person that's willing to spend that amount of money in return oh wait!! installation wonky? alot of whatt? bending to install? Crimped wires came undone? Yet im looked at wrong for not having pics? Which are in my (45) Posted forums as well as proof with photos of the pump in hand. My guy your a certified troll and you only get off on attempting to sound intelligent. So yes sir i apologize but maybe researching and thinking before you speak might not be your strong suit

[N54Society]

Originally Posted by DiFFv1

Says the person that's willing to spend that amount of money in return oh wait!! installation wonky? alot of whatt? bending to install? Crimped wires came undone? Yet im looked at wrong for not having pics? Which are in my (45) Posted forums as well as proof with photos of the pump in hand. My guy your a certified troll and you only get off on attempting to sound intelligent. So yes sir i apologize but maybe researching and thinking before you speak might not be your strong suit

Here's the one I bought from Paul Parks. Remember, I gave an honest review, the things I ran into, and in the end, it all worked out because I can crimp a couple of wires. I'm not looking at you sideways for any other reason except that you think you're above posting pics in this thread. I'm not even recommending Paul Park's product.

In fact, here is what I recommend: anyone in the market for a LPFP should go with the tried and true brands like Fuel-It, BoostConcepts, and VaderSolutions. Not some homemade DIY shit like what you're offering. To top it off, you're not willing to post pics because it's probably another DIY shit product that will require the consumer to finish the damn thing for it to work.

EDIT: I just looked up your posts and it IS a shit DIY kit. Steer clear folks. No wonder why you're so unwilling to post pics

[DiFFv1]

Man... I love when a person has no idea what the hell he is talking about. But wants a gang behind him cheering lol. Here's photos, Make yourself feel retarded at anytime sir. Reason why i deleted my account up here. Too many trolls the community is swamped with them now. Rest in peace

P.S. if you didn't notice the photos, its a Vader solution pump

Also please note what you said here "o top it off, you're not willing to post pics because it's probably another DIY shit product that will require the consumer to finish the damn thing for it to work." Meaning like you and your undone wires? Sorry sir but in fact you are required to finish the installation by dropping it in and plugging it up


Photos:

https://pasteboard.co/I72HIuU.png

https://pasteboard.co/I72IUSr.jpg

[N54Society]

Originally Posted by DiFFv1

Man... I love when a person has no idea what the hell he is talking about. But wants a gang behind him cheering lol. Here's photos, Make yourself feel retarded at anytime sir. Reason why i deleted my account up here. Too many trolls the community is swamped with them now. Rest in peace

P.S. if you didn't notice the photos, its a Vader solution pump

Also please note what you said here "o top it off, you're not willing to post pics because it's probably another DIY shit product that will require the consumer to finish the damn thing for it to work." Meaning like you and your undone wires? Sorry sir but in fact you are required to finish the installation by dropping it in and plugging it up


Photos:

https://pasteboard.co/I72HIuU.png

https://pasteboard.co/I72IUSr.jpg

Once again, learn to read. It would really help you out in life. I said I wouldn't recommend the product I bought, made by Paul Parks, for the reasons stated. If I could have, I would have returned it but that's not a possibility. Then I went on to say which brands I do recommend. Why does this have to be so hard for you?

Other than the crimped wires, the pump I bought was also a "plugin and drop in solution". It's the crimping part that no one should have to go through. You keep throwing around the word "troll" around but I suspect you don't even know what it means. Here's something you are familiar with, scamming. BTW, there is nothing about your kit that is like the VS kit. We should get Omar on here to see how similar this is to his product.

You say

Reason why i deleted my account up here. Too many trolls the community is swamped with them now.

Is this what you do? Go on forums, advertise your product, then get called out, and then "delete" your account? Do us a favor and "delete" this account too. Your pics don't even work and I won't tell you how to fix them (glaring issue).

[Jeff@TopGearSolutions]

Fuel it FTW

[DiFFv1]

Originally Posted by vbp6us

Once again, learn to read. It would really help you out in life. I said I wouldn't recommend the product I bought, made by Paul Parks, for the reasons stated. If I could have, I would have returned it but that's not a possibility. Then I went on to say which brands I do recommend. Why does this have to be so hard for you?

Other than the crimped wires, the pump I bought was also a "plugin and drop in solution". It's the crimping part that no one should have to go through. You keep throwing around the word "troll" around but I suspect you don't even know what it means. Here's something you are familiar with, scamming. BTW, there is nothing about your kit that is like the VS kit. We should get Omar on here to see how similar this is to his product.

You say

Is this what you do? Go on forums, advertise your product, then get called out, and then "delete" your account? Do us a favor and "delete" this account too. Your pics don't even work and I won't tell you how to fix them (glaring issue).

Contact Omar then, Humor me lol " Troll " And you will remain a troll.

"there's nothing like your kit, Like VS"- But you cant even make a simple comparison
" The photo links dont even work" - Clicks link and works just fine on firefox*
" Oh your a scammer!! " - But has no proof or recent scamming incidents

The thing you dont get is that i dont care if you dont want to purchase it, Thats your god giving right. But what is sad is that since you wont you dont want anyone else to either even if it is a legit kit that works well. You dont know me from Eve but you pride yourself on calling me a scammer because i created a account Nov 2018 and havent been awarded with any rep yet lol Like who tf cares about rep i just gave you some, here take some more lol. You get too deep into this forum shet to not remember my friend you have a choice. Good talk, peace