[Klooney]

I have an e90 LCI, swapped seats into the car from a 2008 wrecked e90. The airbags in the seats did not deploy. I coded out the active headrest since the 08 seats didn't come with them. I also swapped the seat belt tensioner assembly on the seat thinking that was the cause of the code but they didn't go away. Any ideas? I'm stuck as to how to get them to clear.

[lnxguy]

What's the status in INPA? It should give you everything in there (seatbelts, tensioners, etc) Also did you unplug the battery before the swap?

[sparky1]

Interested. I didn't swap seats, but I did just get a 93af code for the passenger side active headrest that went bad.

Coded out both for good measure and got codes for both sides now.

I'm assuming the headrest needs to be unplugged, but not sure. I can't clear it from INPA as it just comes back immediately. My next step is to try unplugging the headrest on the passenger side and seeing if the code goes away after clearing again from INPA.

[lnxguy]

If you coded out the headrests correctly, you shouldn't be getting any codes.

[Joe@TopGearSolutions]

Originally Posted by Klooney

I have an e90 LCI, swapped seats into the car from a 2008 wrecked e90. The airbags in the seats did not deploy. I coded out the active headrest since the 08 seats didn't come with them. I also swapped the seat belt tensioner assembly on the seat thinking that was the cause of the code but they didn't go away. Any ideas? I'm stuck as to how to get them to clear.

What values did you code out? Do you know for certain if the replacement tensioner was not involved in a crash?