|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
BMW CODING success
|
|
01-22-2018, 01:32 PM | #5281 | |
New Member
0
Rep 6
Posts |
Quote:
spent about 6 hours trying to get it to work with your software and a different version i found before finding out that my cable is made from the finest chineseium. so ive now ordered a new cable from cableshack one thing i found missing in your ediabas/hardware/obd folder was obdsetup.exe as i needed to use it to do a regedit. im thinking of going down the icom route is there any sites you could recommend for a uk purchase. thanks |
|
Appreciate
0
|
03-17-2018, 06:51 PM | #5282 |
New Member
0
Rep 19
Posts |
Hi,
I'm trying to run properly INPA and others. After installing and configuring, when I run INPA and select car and trying to select module I got an error:"Fehler! Gruppendatei: D_MMI.GRP existiert nicht im Verzechnis ../EDIABAS/ECU" The case is the mentioned file exists in that folder. I'm thinking, why above, I see "../EDIABAS/ECU", when EDIABAS is located ../../../EDIABAS/ECU in relation to INPA/BIN folder. Do I have something wrong with installation? best regards M. |
Appreciate
0
|
03-29-2018, 02:43 PM | #5284 |
Enlisted Member
11
Rep 45
Posts |
Hi
Is it possible to update modules (except MOST) e91 320d from 2006 with cable "USB BMW GT1?" - inpa ncs etc works OK. I think that my car has no dcan so if i have k-line only cable it will be fine ? I have Spdaten 60.1, and ofc good additional power supply. EDIT. question is out of date Last edited by Kuj0n; 04-01-2018 at 12:23 PM.. |
Appreciate
0
|
04-21-2018, 02:13 PM | #5285 |
Enlisted Member
8
Rep 33
Posts |
Is there a thread for entry into coding and flashes? I've coded a bunch with subaru and american cars, but I am not familiar with the software/ hardware involved with BMW's.
|
Appreciate
0
|
07-28-2018, 08:28 AM | #5287 |
Registered
0
Rep 1
Posts |
help with my m325i
hi there.i have m325i.the battery was replaced now they say must be rocoded.but it starts the cars.is there easer way to code it please thank u
|
Appreciate
0
|
09-05-2018, 09:03 AM | #5288 |
New Member
32
Rep 17
Posts |
I just bought k+Dcan cable with switch on it. It came with Inpa v5.02 and v5.06 on disc. I just installed v5.06 cable connects see battery and ecu but i cant get the program working. It doesnt show any of models. F3-4-5-6.. buttons showing blank.
How can i get latest working software for my e90? |
Appreciate
0
|
01-19-2019, 08:29 PM | #5290 |
Private
41
Rep 75
Posts
Drives: 2023 BMW X5 M50i
Join Date: Dec 2009
Location: HOUSTON, TX
|
Hello everyone I just bought K+Dcan cable and it say it is compatible with INPA unfortunately the disc they sent with its broken in half so now I am looking for a way to download program that will with this cable can anyone can direct me right direction I really appreciated.
__________________
X5 M50I
|
Appreciate
0
|
01-20-2019, 10:49 AM | #5291 |
Registered
0
Rep 2
Posts |
https://gyazo.com/82a79082371175d18861576f937f9bc8
This is all that pops-up when I load INPA and I can't figure out how to get the rest of it to work. I'm on windows 10. |
Appreciate
0
|
01-24-2019, 04:35 AM | #5292 | |
Private
2
Rep 53
Posts |
Quote:
|
|
Appreciate
0
|
01-24-2019, 04:38 AM | #5293 | |
Private
2
Rep 53
Posts |
BMW Software & Cable
Quote:
|
|
Appreciate
0
|
01-24-2019, 05:01 AM | #5294 |
New Member
0
Rep 11
Posts |
By far the easiest-to-use one is Carista. It's a mobile app and works with generic cheap ELM327 OBD dongles. But it only does coding on CAN-based cars, i.e. mid-2007 and newer E-models.
Other than that, if you're feeling adventurous, you can try NCS Expert on a 32-bit version of Windows, which can do it on any E-chassis car with the correct cable (and effectively, that's what this thread is about). |
Appreciate
0
|
02-12-2019, 12:54 AM | #5295 | |
Private
2
Rep 53
Posts |
Quote:
I would start with the last link you shared for the spreadsheet codes. I purchased the cable and installed the software for BMW Coding Tool. I am interested in Folding mirror feature. However, I am not able to code it because: In the spreadsheet, it was listed under Module "FRM (NFRM)" I didn't find this in my code list, instead I found FRM.C09 , FRM2.C09 and so on. Am I missing anything? Because even the function value "SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPP" was not there when I searched for it. |
|
Appreciate
0
|
02-20-2019, 09:45 PM | #5297 |
Registered
0
Rep 3
Posts |
RDC Module Reset Error
I got everything setup and communicating with my 2011 328i. After replacing the RDC module trying to reset it. Below is what I am using and what I am getting. Any help or tips is much appreciated.
Using NCS-Expertentool V4.0.1, CoAPI: V3.13.2, KrAPI: 3.0.2, Ediabas: V7.3.0 Cable I got: BMW K+DCAN OBD2 Cable Switch FTDI FT232RL Tools INPA EDIABAS NCS EXPERT ISTA https://www.ebay.com/itm/BMW-K-DCAN-...72.m2749.l2649 Error: [13:55:35.717] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1 [13:55:35.717] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP [13:55:35.842] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [13:55:35.842] [2019-02-18] [SERIE] SG antwortet nicht CODIERINDEX_LESEN [13:55:38.546] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1 [13:55:38.546] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP [13:55:38.664] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [13:55:38.664] [2019-02-18] [SERIE] SG antwortet nicht CODIERDATEN_LESEN |
Appreciate
0
|
03-25-2019, 01:41 AM | #5298 |
New Member
0
Rep 7
Posts |
Hi guys, long time lurker first time poster. Does anyone know what module the Reverse-Gong (for Japan) would be in? I’m trying to code this off my car but can’t find it anywhere!
|
Appreciate
0
|
03-29-2019, 04:27 PM | #5299 | |
Private
31
Rep 80
Posts |
Quote:
|
|
Appreciate
0
|
03-29-2019, 07:30 PM | #5300 |
Private
41
Rep 75
Posts
Drives: 2023 BMW X5 M50i
Join Date: Dec 2009
Location: HOUSTON, TX
|
Does Bimmer code works on E90 2006?
__________________
X5 M50I
|
Appreciate
0
|
04-12-2019, 01:11 PM | #5301 |
Captain
246
Rep 612
Posts |
I have searched and cannot find what I need. I have INPA and the main menu is in English but when I get deeper in to test DSC, bleed brakes, steering angle, etc. everything is in German which makes it really hard to keep up. I had to manually bleed my brakes after doing a DSC motor swap because I couldn't translate fast enough and errors came up, then went away, etc. I have 2008 E93 so if there is another version that doesn't work with newer cars but has more English that is fine by me.
|
Appreciate
0
|
04-29-2019, 11:17 AM | #5302 |
New Member
4
Rep 7
Posts |
CABD Error
Hey bud. I'm new to this so pls be patient...
Just got youra Bimmergeeks cable and it seems to be working fine. I have been on countless blogs and have gone over FAQ's to make sure I am doing everything right. I keep getting "error in CABD!" when I try to read or write files on my '09 E92. I have spent days going over everything to make sure I am not screwing this up - Here's some background: Win 10 laptop - com port 1, latency 1 on usb connection NCS Expert connects but the ingition circle on INPA is not filled in, only the cable NCS profile on Expert (manipulation unchecked) Here isthe error log: [23:31:55.689] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371 [23:31:55.689] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED [23:31:55.798] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [23:31:55.798] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN ================================================== ============================== [23:34:08.107] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS TestCod 365 [23:34:08.107] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_SCHREIBEN: ERROR_ECU_UPLOAD_NOT_ACCEPTED [23:34:08.220] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [23:34:08.220] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) TEST_CODIERUNG ================================================== ============================== [23:35:28.342] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371 [23:35:28.342] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED [23:35:28.454] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [23:35:28.454] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN_OHNE_FG_AEI ================================================== ============================== Many thanks in advance... |
Appreciate
0
|
Bookmarks |
|
|