E90Post
 


 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > Australia > 323i vs 325i diff compatibility



Reply
 
Thread Tools Search this Thread
      03-05-2021, 11:49 PM   #1
cheerio
Private First Class
cheerio's Avatar
Australia
149
Rep
150
Posts

Drives: E61 + E36 + E90 scrapheap
Join Date: Mar 2021
Location: Melbourne

iTrader: (0)

323i vs 325i diff compatibility

Hey all.
Just bought a 323i and it has a little bit of a rattle coming from the diff. From what I’ve heard this is caused by bad pinion bearings, is common on the 320i, and the 323i as well, which uses the same bearings.
The 325i’s diff seems to be much more reliable in this regard. I’m wondering if it’s be possible to get a 325i diff from a wrecker and install it... Does anyone know if they’re compatible, or are the diff mounts/driveshaft different between the two cars?
Thanks

Edit: Checked RealOEM, they seem to have 25mm different driveshaft lengths, presumably because 325i diff is longer. Any idea if it'd be worth swapping the driveshaft and diff together?

Last edited by cheerio; 03-06-2021 at 02:15 AM..
Appreciate 0
      03-06-2021, 01:13 PM   #2
F31B48
Captain
F31B48's Avatar
293
Rep
654
Posts

Drives: BMW G21 E61 LCI
Join Date: Feb 2019
Location: Australia

iTrader: (0)

Quote:
Originally Posted by cheerio View Post
Hey all.
Just bought a 323i and it has a little bit of a rattle coming from the diff. From what I’ve heard this is caused by bad pinion bearings, is common on the 320i, and the 323i as well, which uses the same bearings.
The 325i’s diff seems to be much more reliable in this regard. I’m wondering if it’s be possible to get a 325i diff from a wrecker and install it... Does anyone know if they’re compatible, or are the diff mounts/driveshaft different between the two cars?
Thanks

Edit: Checked RealOEM, they seem to have 25mm different driveshaft lengths, presumably because 325i diff is longer. Any idea if it'd be worth swapping the driveshaft and diff together?
I remember looking into this for my 323i. I think the driveshaft was different and both the output shafts as well. I ended up rebuilding my diff. The bearing/seal kit was about $230. I got it off Ebay from a UK seller. The bearings were all OEM.
Edit: i just checked the price on ebay. The same kit from the same seller is now $400. They'll blame covid no doubt.

https://www.ebay.com/itm/BMW-1-3-SER....m46890.l49292

Last edited by F31B48; 03-06-2021 at 01:28 PM..
Appreciate 0
      03-06-2021, 08:29 PM   #3
cheerio
Private First Class
cheerio's Avatar
Australia
149
Rep
150
Posts

Drives: E61 + E36 + E90 scrapheap
Join Date: Mar 2021
Location: Melbourne

iTrader: (0)

Thanks for the reply! Yeah, I was looking around a bit for bearing kits, they all seem to be around $400. Didn’t realise the price had come up so much :/

I was considering upgrading to the 325i intake manifold at some point for more power/torque, but if the 323i’s diff bearings fall apart at stock torque I’d hate to think how they’d wear with more load on them...
I’m also thinking that taking a driveshaft from a wrecked car might not be the best idea - what if it’s been bent out of balance?

By output shafts, do you mean the shafts going from the diff to the wheels? And was the diff rebuild very difficult? Any specialised tools needed?
Appreciate 0
      03-07-2021, 12:11 AM   #4
F31B48
Captain
F31B48's Avatar
293
Rep
654
Posts

Drives: BMW G21 E61 LCI
Join Date: Feb 2019
Location: Australia

iTrader: (0)

Quote:
Originally Posted by cheerio View Post
Thanks for the reply! Yeah, I was looking around a bit for bearing kits, they all seem to be around $400. Didn’t realise the price had come up so much :/

I was considering upgrading to the 325i intake manifold at some point for more power/torque, but if the 323i’s diff bearings fall apart at stock torque I’d hate to think how they’d wear with more load on them...
I’m also thinking that taking a driveshaft from a wrecked car might not be the best idea - what if it’s been bent out of balance?

By output shafts, do you mean the shafts going from the diff to the wheels? And was the diff rebuild very difficult? Any specialised tools needed?
Yeah output shafts from diff to wheels. When i was buying some shims from a diff shop to do the backlash, the guy there told me the issue with the small diffs is lack of lubrication to the front pinion bearing. He said even the 116i's and 120i's which have the same diff, wear pinion bearings. The later model diffs have a steel plate fitted to retain oil in the area of the front pinion bearing he reckons. He also recommended i reduce the preload on the pinion bearings, which i did. The only thing special you really need is a press to remove and install the pinion bearings.

I have changed my manifold to the 3 stage and flashed it to 325i spec. No issues yet. I think its been about 6 months and 10000km roughly since i did all that. No issues yet........ time will tell i suppose

Last edited by F31B48; 03-07-2021 at 12:27 AM..
Appreciate 0
      03-13-2021, 07:14 AM   #5
cheerio
Private First Class
cheerio's Avatar
Australia
149
Rep
150
Posts

Drives: E61 + E36 + E90 scrapheap
Join Date: Mar 2021
Location: Melbourne

iTrader: (0)

So I went and bought a diff, driveshaft and rear output shaft from a wrecked 325i. Price was comparable to the $400 it'd cost for the bearing kit, so after factoring in resale value of my 323i parts, it seemed like a no brainer.

They all seem to be in good shape, diff isn't full of dark green muck like mine was, so things are looking promising. Hopefully installing them will go smoothly; I'll post an update when all is finished!
Appreciate 0
      03-17-2021, 06:21 AM   #6
cheerio
Private First Class
cheerio's Avatar
Australia
149
Rep
150
Posts

Drives: E61 + E36 + E90 scrapheap
Join Date: Mar 2021
Location: Melbourne

iTrader: (0)

Everything's installed and the awful grinding noise is no more!
Needed to
- Drain new diff
- Remove exhaust
- Remove heat shields
- Remove old driveshaft
- Remove old output shafts
- Remove old diff
- Install new diff
- Install new output shafts
- Install new driveshaft
- Reinstall heat shields
- Reinstall exhaust
- Fill diff with new oil

I didn't realise I'd need different fasteners to attach the output shafts to the new diff; the bigger diff uses bigger bolts, as the output shafts are larger diameter. Ended up having to buy the bolts and reinforcing plates from dealer at eye-watering price.

Also managed to strip the head on one of the driveshaft-to-diff bolts :/ It's slightly under-torqued now, should I be worried? I figured the other three are good, so I can inspect it every now and then and replace the bolts if the stripped one comes loose...
Appreciate 0
      11-07-2024, 03:22 AM   #7
Replica
New Member
0
Rep
12
Posts

Drives: e90 lci mtech 323 2010
Join Date: Jul 2018
Location: sydney

iTrader: (0)

cheerio
Was the swap Pre lci to Pre lci
or
Pre Lci to Lci
Im in the same boat but im worried they wont adapt to my wheel hubs.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:49 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST