Teaser

ThugzZ BunnY · 10-08-2015, 12:31 PM

Have a few more things in the works before I make a build thread. I really just wanted to post a picture cause I can't stop staring at my car.

wdeerfield · 10-08-2015, 01:23 PM

oh look another e9x on f14 sdc! jk

car looks great from what i can see so far. nice wheel finish for white.

fmoua916 · 10-08-2015, 04:30 PM

What size and offset and tire size?

mike@x-ph.com · 10-09-2015, 11:19 AM

Looks good

kcin_16 · 10-09-2015, 11:26 AM

Quote:

Originally Posted by wdeerfield

oh look another e9x on f14 sdc! jk

car looks great from what i can see so far. nice wheel finish for white.

I was thinking the same thing haha

thompsac25 · 10-09-2015, 12:03 PM

Welcome to the Forgestar club! Curious to know your wheel and tire specs. Are they gloss gunmetal or satin?

ThugzZ BunnY · 10-09-2015, 01:43 PM

thompsac25 gloss. 19x9.5 +22 10 +25 235/25 265/30
thinking i might need to go a tire size smaller cause im rubbing.

ThugzZ BunnY · 10-09-2015, 05:25 PM

Quote:

Originally Posted by kcin_16

I was thinking the same thing haha

Says the guy with an AW with black wheels car.

kcin_16 · 10-09-2015, 05:32 PM

Quote:

Originally Posted by ThugzZ BunnY

Says the guy with an AW with black wheels car.

Touché sir, touché

Delusive · 10-10-2015, 07:13 AM

Those wheels are so nice, always loved the Forgestar F14 SDC's. I bet they'd make good chairs if you put cushion on it your butt would just sink into it because of the deep concaveness.

ThugzZ BunnY · 10-10-2015, 08:05 AM

Delusive if you put a back on them, they wold seriously be comfortable. i absolutely love them and the gloss gunmetal looks so much better than i thought it would. my only knock on the forgestars are the ficking center caps started coming apart immediately. and the finish in one spot on one wheel is really rough.

The Ghost · 11-28-2015, 09:50 PM

Quote:

Originally Posted by ThugzZ BunnY

thompsac25 gloss. 19x9.5 +22 10 +25 235/25 265/30
thinking i might need to go a tire size smaller cause im rubbing.

What your suspension setup? Is that 19X10 ET 25 in the rear? Please post a pic from dead-on from the front and rear? Also any pic from the side would be great.

330xtrai · 11-28-2015, 11:54 PM

Looks great! As for the rubbing, you're probably rubbing on the bumper bracket which is pretty easy to do I've been meaning to do it for my rear I just haven't had much time. Also got can always get camber plates.

SMH · 11-29-2015, 12:05 AM

Very nice

ThugzZ BunnY · 11-29-2015, 12:37 PM

330xtrai i shaved as far back as i could to prevent the bracket from rubbing. its rubbing on the fender just barely when im backing out of my driveway.

330xtrai · 11-29-2015, 12:50 PM

Quote:

Originally Posted by ThugzZ BunnY

330xtrai i shaved as far back as i could to prevent the bracket from rubbing. its rubbing on the fender just barely when im backing out of my driveway.

Oh Ok. I mean if it's rubbing very little it shouldn't be too bad to just live with it. Not sure if you rolled your fenders but rolling it slightly should help stop it too

ThugzZ BunnY · 11-29-2015, 01:34 PM

330xtrai shaved. more room than rolling and dont have to worry about messing up and getting bacon fenders.

thompsac25 · 11-30-2015, 07:42 AM

Quote:

Originally Posted by The Ghost

What your suspension setup? Is that 19X10 ET 25 in the rear? Please post a pic from dead-on from the front and rear? Also any pic from the side would be great.

Those specs are the OP's specs.
Mine are: 19x9.5 +22, 19x11 +25, 225 front tire, 255 rear tire (both stretched). I'm running Tein STechs

I have minor rubbing in the rear with this setup, but I am planning to roll the rear fenders, so I should be good to go. Also, I have an e90, so my car can handle the specs a little easier than a coupe.

Hope the pics help!

wdeerfield · 11-30-2015, 07:45 AM

Quote:

Originally Posted by thompsac25

Those specs are the OP's specs.
Mine are: 19x9.5 +22, 19x11 +25, 225 front tire, 255 rear tire (both stretched). I'm running Tein STechs

I have minor rubbing in the rear with this setup, but I am planning to roll the rear fenders, so I should be good to go. Also, I have an e90, so my car can handle the specs a little easier than a coupe.

Hope the pics help!

so jealous of this car! looks amazing. nice work. i take it thats the house you are building too? congrats!

thompsac25 · 11-30-2015, 07:59 AM

Quote:

Originally Posted by wdeerfield

so jealous of this car! looks amazing. nice work. i take it thats the house you are building too? congrats!

Thanks man! Definitely put a lot of money into this thing! lol
And yes, thats the house we just built. Moved in 2 months ago! Has a 3 car garage as well, so I guess I need to buy a racecar

mmmnot · 11-30-2015, 11:09 AM

Quote:

Originally Posted by wdeerfield

oh look another e9x on f14 sdc!

Rivers · 11-30-2015, 11:15 AM

Quote:

Originally Posted by wdeerfield

oh look another e9x on f14 sdc!.

shits gayer than a bag of dicks

10-08-2015, 12:31 PM	#1
ThugzZ BunnY Major 682 Rep 1,155 Posts Drives: 2011 335i Join Date: Jan 2015 Location: BMW of Chattanooga iTrader: (0)	Teaser Have a few more things in the works before I make a build thread. I really just wanted to post a picture cause I can't stop staring at my car. Attached Images __________________ IG: @andy__wise Inquiries: Andrew.Wise@bmwofchattanooga.com
	Appreciate 0 Tweet Quote

10-08-2015, 01:23 PM	#2
wdeerfield A family of bimmers 2745 Rep 7,741 Posts Drives: '18 G01 X3M40i Join Date: Jan 2012 Location: Clifton Park, NY iTrader: (0)	oh look another e9x on f14 sdc! jk car looks great from what i can see so far. nice wheel finish for white. __________________ 2018 PB/Black G01 X3M40i \| 699M \| ZDA \| ZPP \| ZPX \| Maxton front lip \| X3M vents \| 15mm Spacers \| Diamond G20 style grills
	Appreciate 0 Quote

10-08-2015, 04:30 PM	#3
fmoua916 First Lieutenant 72 Rep 385 Posts Drives: 335i Join Date: Sep 2015 Location: sacramento iTrader: (1)	What size and offset and tire size?
	Appreciate 0 Quote

10-09-2015, 11:19 AM	#4
mike@x-ph.com BimmerPost Supporting Vendor 24174 Rep 190,750 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Looks good __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

10-09-2015, 12:03 PM	#6
thompsac25 Stance to make her dance 705 Rep 1,995 Posts Drives: 2022 G80 M3 Join Date: Nov 2013 Location: Cincinnati, OH iTrader: (33)	Welcome to the Forgestar club! Curious to know your wheel and tire specs. Are they gloss gunmetal or satin? __________________ *INSTAGRAM: thompsac_m3* YouTube: ACCELERATED MOTION 2022 G80 M3 6MT, FEMTO, BM3, KW, AWE, MAD, lots of carbon
	Appreciate 0 Quote

10-09-2015, 01:43 PM	#7
ThugzZ BunnY Major 682 Rep 1,155 Posts Drives: 2011 335i Join Date: Jan 2015 Location: BMW of Chattanooga iTrader: (0)	thompsac25 gloss. 19x9.5 +22 10 +25 235/25 265/30 thinking i might need to go a tire size smaller cause im rubbing. __________________ IG: @andy__wise Inquiries: Andrew.Wise@bmwofchattanooga.com
	Appreciate 0 Quote

10-10-2015, 07:13 AM	#10
Delusive Lieutenant Colonel 136 Rep 1,598 Posts Drives: Bagged E92 Join Date: May 2012 Location: Bay Area, CA iTrader: (9)	Those wheels are so nice, always loved the Forgestar F14 SDC's. I bet they'd make good chairs if you put cushion on it your butt would just sink into it because of the deep concaveness. __________________ Instagram Youtube
	Appreciate 0 Quote

10-10-2015, 08:05 AM	#11
ThugzZ BunnY Major 682 Rep 1,155 Posts Drives: 2011 335i Join Date: Jan 2015 Location: BMW of Chattanooga iTrader: (0)	Delusive if you put a back on them, they wold seriously be comfortable. i absolutely love them and the gloss gunmetal looks so much better than i thought it would. my only knock on the forgestars are the ficking center caps started coming apart immediately. and the finish in one spot on one wheel is really rough. __________________ IG: @andy__wise Inquiries: Andrew.Wise@bmwofchattanooga.com
	Appreciate 0 Quote

11-28-2015, 11:54 PM	#13
330xtrai Do you even post BRO? 218 Rep 2,937 Posts Drives: 330xi Join Date: Jun 2012 Location: New Jersey iTrader: (1) Garage List 2006 BMW 330xi [0.00]	Looks great! As for the rubbing, you're probably rubbing on the bumper bracket which is pretty easy to do I've been meaning to do it for my rear I just haven't had much time. Also got can always get camber plates. __________________ E90\|330xi\|SGM\|Terra Cotta interior\|Forged1 Wheels(one side red the other city lights)\|M3 Rep Front Bumper\|Msport Rear Bumper\|KW V1 Coilovers\|K&N Air Filter\|OEM Black Grille\|Red Cyba Air scoops\|DIY Gloss Black Side Splitters\|Tee rear splitters\|Monkey Air Freshener\| DSC_0395-2
	Appreciate 0 Quote

11-29-2015, 12:05 AM	#14
SMH Captain 63 Rep 621 Posts Drives: 2011 335i E90 Join Date: May 2013 Location: Reno, NV iTrader: (0) Garage List 2011 BMW 335i [0.00]	Very nice __________________ Dinan Stage 2, Active Autowerke Exhaust, Mishimoto Intercooler, ER Chargepipe IG: SMH_N55
	Appreciate 0 Quote

11-29-2015, 12:37 PM	#15
ThugzZ BunnY Major 682 Rep 1,155 Posts Drives: 2011 335i Join Date: Jan 2015 Location: BMW of Chattanooga iTrader: (0)	330xtrai i shaved as far back as i could to prevent the bracket from rubbing. its rubbing on the fender just barely when im backing out of my driveway. __________________ IG: @andy__wise Inquiries: Andrew.Wise@bmwofchattanooga.com
	Appreciate 0 Quote

11-29-2015, 01:34 PM	#17
ThugzZ BunnY Major 682 Rep 1,155 Posts Drives: 2011 335i Join Date: Jan 2015 Location: BMW of Chattanooga iTrader: (0)	330xtrai shaved. more room than rolling and dont have to worry about messing up and getting bacon fenders. __________________ IG: @andy__wise Inquiries: Andrew.Wise@bmwofchattanooga.com
	Appreciate 1 Quote