[codinge90]

Is it possible to code out the corner amber led on LCI 2011-2013 e92 coupes? I've done the coding plenty of times on pre lci but I can't find anything online that lists the lci process. Everything I'm finding on the forums says cut the wires and code out the warning. Let me know if anyone has a solution via coding. Thanks.

[Impac]

Yup i do some software versions need 2 parameters changed and some 3, no need for wire cutting

[codinge90]

Originally Posted by Impac

Yup i do some software versions need 2 parameters changed and some 3, no need for wire cutting

Can you let me know what variables you change if the frm?

[codinge90]

Originally Posted by Impac

Yup i do some software versions need 2 parameters changed and some 3, no need for wire cutting

Here is my TRC file.

[lnxguy]

This is how to code it on a e90 LCI.

1) Set PWM_SL_V_BEI_AKTIVEN_AL to wert_04
2) Set PWM_SL_V_BEI_AKTIVEN_FL to wert_04
3) Set WL_POL to nicht_sktiv

[codinge90]

Originally Posted by lnxguy

This is how to code it on a e90 LCI.

1) Set PWM_SL_V_BEI_AKTIVEN_AL to wert_04
2) Set PWM_SL_V_BEI_AKTIVEN_FL to wert_04
3) Set WL_POL to nicht_sktiv

Hi thanks for the response. PWM_SL_V_BEI_AKTIVEN_AL & PWM_SL_V_BEI_AKTIVEN_FL are not present in my FRM. I do have PWM_POL_BEI_AKTIVEN_AL & PWM_POL_BEI_AKTIVEN_FL and I have set both of those to wert_04 (Stock is wert_03) and it did not do anything to the corner lights. I also don't have WL_POL in my FRM TRC file.

[codinge90]

Bump. Still haven't been able to figure it out

[codinge90]

Bump

[lnxguy]

After doing some Google searching, it doesn't look like it's possible.

[Joe@TopGearSolutions]

Originally Posted by codinge90

Hi thanks for the response. PWM_SL_V_BEI_AKTIVEN_AL & PWM_SL_V_BEI_AKTIVEN_FL are not present in my FRM. I do have PWM_POL_BEI_AKTIVEN_AL & PWM_POL_BEI_AKTIVEN_FL and I have set both of those to wert_04 (Stock is wert_03) and it did not do anything to the corner lights. I also don't have WL_POL in my FRM TRC file.

Look also for sidemarker_us (or any value that has sidemarker), and turn it off as well.

[codinge90]

Originally Posted by Joe@TopGearSolutions

Look also for sidemarker_us (or any value that has sidemarker), and turn it off as well.

Thanks Joe I'll try that today and report back!

[codinge90]

Originally Posted by Joe@TopGearSolutions

Look also for sidemarker_us (or any value that has sidemarker), and turn it off as well.

Hey Joe,

I took a look and disabled sidemarker but it did not turn off that corner led. So far I have done this below.

PWM_POL_BEI_AKTIVEN_AL
wert_04
PWM_POL_BEI_AKTIVEN_FL
wert_04
SIDEMARKER_US_MIT_FRA_V
nicht_aktiv


I did see "PWM_FRA_V_FKT_SIDEMARKER wert_01" present in my FRM module but I did not touch it. Maybe changing the wert value may do something? I can also link my TRC file, I can't find anything online with a solid answer on how to disable the corner LED for LCI coupes. I have to think it's possible, I've done it to countless Pre Lci coupes and LCI Sedans but the coupes are a pain. Let me know what you can recommend!

[Joe@TopGearSolutions]

Originally Posted by codinge90

Hey Joe,

I took a look and disabled sidemarker but it did not turn off that corner led. So far I have done this below.

PWM_POL_BEI_AKTIVEN_AL
wert_04
PWM_POL_BEI_AKTIVEN_FL
wert_04
SIDEMARKER_US_MIT_FRA_V
nicht_aktiv


I did see "PWM_FRA_V_FKT_SIDEMARKER wert_01" present in my FRM module but I did not touch it. Maybe changing the wert value may do something? I can also link my TRC file, I can't find anything online with a solid answer on how to disable the corner LED for LCI coupes. I have to think it's possible, I've done it to countless Pre Lci coupes and LCI Sedans but the coupes are a pain. Let me know what you can recommend!

I would use NCS Dummy and look at the values for each wert. I think you're looking for the values 00,10 or 00,00. Or maybe you can use NETTODAT to code those values if currently not present in any wert values.