[leobrum]

hello to all

i have installed led angel eyes on my bmw e90 lci 2009 model

the angel eyes flicker upon start up. i have also installed low beam LEDs, i did manage to turn the flicker off on the low beams via bimmercode and veepeak. the problem im having is there is no option to turn off cold/warm monitoring for the angel eyes. i have also tried a carly device, there is an option to turn off angel eye voltage but it is already set to off
any help with this is much appreciated

thank you

[LuxAngelEyes]

what model angel eyes did you install in the car? Good quality angel eyes, like the ones sold by the vendors on this forums, will not do that. If they flicker on startup then likely they aren't designed correctly

[leobrum]

Originally Posted by LuxAngelEyes

what model angel eyes did you install in the car? Good quality angel eyes, like the ones sold by the vendors on this forums, will not do that. If they flicker on startup then likely they aren't designed correctly

these are the ones i have

https://www.ebay.co.uk/itm/40w-E90-E....m46890.l49286

do you have a link to the correct ones i need. thank you for your advice

[lnxguy]

Code out the DRL bulb checks. Don't waste $$$ on new bulbs.

[leobrum]

Originally Posted by lnxguy

Code out the DRL bulb checks. Don't waste $$$ on new bulbs.

thank you for your advice. the problem i have is there is no option to turn of the bulb checks for the angel eyes via bimmercode. i have the option to turn off the cold warm monitoring for the angel eyes but no option for the angel eyes for some reason. thank you for your help with this