E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > ConnectedDrive / I-Drive / Navigation Related Discussion > Cic upgrade



Reply
 
Thread Tools Search this Thread
      06-22-2020, 03:49 PM   #1
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Cic upgrade

I’m looking to go from non I-Drive to cic and have had a good read over the procedure. What I can’t understand is which cic version/ build date I need. I’ve looked on eBay etc and the latest I can find is one made in 2011. I also want to fit a Combox.

I’ve currently got a;

E92 uk 2010 320d msport
BMW professional cd Headunit
Basic sound system

Once it’s installed I’ll be looking to upgrade the firmware and software, so I want to make sure I don’t run into any problems, I’ll be getting a bn2000 Combox.

I’m wanting sat nav, Bluetooth streaming and the online services, might put a rear view camera in (has park distance control at the mo) and maybe a tv module. Dab enabled cic Headunit seem as rare as hens teeth and £200 dearer than non DAB Headunits

Anyone able to keep me right on the hardware to look out for?

Also anyone confirm if I have a mulf or tcu. I’ve got Bluetooth calling, no SOS and no usb socket anywhere.
Appreciate 0
      06-22-2020, 08:06 PM   #2
smass
Lieutenant Colonel
393
Rep
1,578
Posts

Drives: 06 325i - 10 335i
Join Date: Sep 2010
Location: Scottsdale, AZ

iTrader: (1)

Garage List
2010 E90 335i  [0.00]
2016 F15 35i  [0.00]
2003 E53 3.0  [0.00]
2006 E90 325i  [0.00]
There really is not any way to know if you have the latest CIC software (C1A) until you read it with a coding rig. I have bought 3 used CIC from 2012s. 2 of the 3 were on the latest software. A safer bet may be to get one from a diesel. Those got flashed at the dealer more often.

As for the MULF/TCU post a pic of what is under the floor of your trunk. You may have a mulf with BT only and no USB wiring. Or BT may be built into your head unit.
Appreciate 0
      06-27-2020, 07:28 PM   #3
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Thanks.

I’m toying with the idea of just getting the cic, controller and sticking in an android unit. I know I could get a gps antenna and connect it directly to the cic, the other option is a Combox but not sure how / where I’d wire in an antenna. I’m assuming My shark fin only has a radio antenna so not sure of how I’d go about a factory gps setup.

View post on imgur.com

Quote:
Originally Posted by smass View Post


There really is not any way to know if you have the latest CIC software (C1A) until you read it with a coding rig. I have bought 3 used CIC from 2012s. 2 of the 3 were on the latest software. A safer bet may be to get one from a diesel. Those got flashed at the dealer more often.

As for the MULF/TCU post a pic of what is under the floor of your trunk. You may have a mulf with BT only and no USB wiring. Or BT may be built into your head unit.

Last edited by Leegbr; 06-27-2020 at 07:31 PM.. Reason: Pic
Appreciate 0
      06-27-2020, 09:55 PM   #4
smass
Lieutenant Colonel
393
Rep
1,578
Posts

Drives: 06 325i - 10 335i
Join Date: Sep 2010
Location: Scottsdale, AZ

iTrader: (1)

Garage List
2010 E90 335i  [0.00]
2016 F15 35i  [0.00]
2003 E53 3.0  [0.00]
2006 E90 325i  [0.00]
Your picture is a mulf. The version without USB. I believe the android will require a CIC but do some research.
Appreciate 0
      06-28-2020, 07:22 AM   #5
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Quote:
Originally Posted by smass View Post
Your picture is a mulf. The version without USB. I believe the android will require a CIC but do some research.
Thanks, yeah just weighing up costs if I wanted everything full Oem it seems cheaper to just get the cic, controller, dash and wires And a droiduk screen.

If the cic isn’t coded to the car I’m assuming it will still pull car data over and that only nav and audio doesn’t work. So I’ll need to code it to get the aux out on the cic working otherwise I won’t get audio on the droiduk screen.

Cheers for your help
Appreciate 0
      06-28-2020, 01:15 PM   #6
smass
Lieutenant Colonel
393
Rep
1,578
Posts

Drives: 06 325i - 10 335i
Join Date: Sep 2010
Location: Scottsdale, AZ

iTrader: (1)

Garage List
2010 E90 335i  [0.00]
2016 F15 35i  [0.00]
2003 E53 3.0  [0.00]
2006 E90 325i  [0.00]
Aux in is all that is needed for the aftermarket systems. Nav needs coding and or emulator/patch activation but you will be using the aftermarket system. CIC coding may be needed if your car does not match the donor with base audio vs logic 7. So you probably will need some form of coding.
Appreciate 0
      06-29-2020, 03:17 PM   #7
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Quote:
Originally Posted by smass View Post
Aux in is all that is needed for the aftermarket systems. Nav needs coding and or emulator/patch activation but you will be using the aftermarket system. CIC coding may be needed if your car does not match the donor with base audio vs logic 7. So you probably will need some form of coding.
I’ve gone the oem route. I’ve bought a cic with the following details;

HW 40
Build date 18/13
Ece region

I’m hoping with it being a newer model, coding will be easier. I’ll be buying a bn2000 Combox soon as well and doing a pin swap.

Have you any experience with that era cic?

As the car doesn’t have gps, is it simply a case of buying a gps antenna with a fakra connector and plugging it into the Combox and maybe some coding?

The CIC also happens to have DAB, so is it the same as above by connecting a dab antenna but directly to the cic?
Appreciate 0
      06-30-2020, 08:33 AM   #8
smass
Lieutenant Colonel
393
Rep
1,578
Posts

Drives: 06 325i - 10 335i
Join Date: Sep 2010
Location: Scottsdale, AZ

iTrader: (1)

Garage List
2010 E90 335i  [0.00]
2016 F15 35i  [0.00]
2003 E53 3.0  [0.00]
2006 E90 325i  [0.00]
Quote:
Originally Posted by Leegbr View Post
I’ve gone the oem route. I’ve bought a cic with the following details;

HW 40
Build date 18/13
Ece region

I’m hoping with it being a newer model, coding will be easier. I’ll be buying a bn2000 Combox soon as well and doing a pin swap.

Have you any experience with that era cic?

As the car doesn’t have gps, is it simply a case of buying a gps antenna with a fakra connector and plugging it into the Combox and maybe some coding?

The CIC also happens to have DAB, so is it the same as above by connecting a dab antenna but directly to the cic?
CICs are mostly the same. It is the C1A firmware that many are upgraded to that makes the CIC patcher work to activate the nav and other features. Combox does not need the GPS if you are just using it for bluetooth and USB. If there is a blue antenna wire in the trunk, it can be extended to the CIC in the front for nav. If no blue connector, the shark fin may have the un-used port. Or aftermarket antenna in the dash can also work.

I don't know about European DAB. US uses the same antenna for alll radio.
Appreciate 0
      06-30-2020, 01:24 PM   #9
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Quote:
Originally Posted by smass View Post
CICs are mostly the same. It is the C1A firmware that many are upgraded to that makes the CIC patcher work to activate the nav and other features. Combox does not need the GPS if you are just using it for bluetooth and USB. If there is a blue antenna wire in the trunk, it can be extended to the CIC in the front for nav. If no blue connector, the shark fin may have the un-used port. Or aftermarket antenna in the dash can also work.

I don't know about European DAB. US uses the same antenna for alll radio.
Thanks mate, just got a combox, dab diversity antenna, glovebox usb, arm rest aux\usb, some wires and connectors to make the screen and Combox harnesses and I’m good to go.

I couldn’t see the any connections in the boot\ trunk. I’ve heard the shark fin may have the gps antenna already but I’m not sure how I’d access it, do you know if the roof lining comes down as a panel or is it like loose cloth?, I’ve bought a gps antenna which I was going to mount under the dash towards the window.
Appreciate 0
      06-30-2020, 04:17 PM   #10
smass
Lieutenant Colonel
393
Rep
1,578
Posts

Drives: 06 325i - 10 335i
Join Date: Sep 2010
Location: Scottsdale, AZ

iTrader: (1)

Garage List
2010 E90 335i  [0.00]
2016 F15 35i  [0.00]
2003 E53 3.0  [0.00]
2006 E90 325i  [0.00]
If you already bought a GPS antenna, just use that. If your shark fin had the connector, you would still need an extension.
Appreciate 0
      07-05-2020, 05:22 PM   #11
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Just waiting on various bits to come through including the dash.

I’ve fitted the diversity antenna and the combox and swapped the pins over. My Bluetooth phone prep no longer works which I expected as in my understanding the car doesn’t know there’s a combox. I’ve noticed on the pin swap diagram that it says pwr to pin 1 and 2 of the combox connector. I’ve put it in pin 1 as I only had 1 red/yellow wire.

Once I’ve got the rest of the parts I’ll have a look and see what firmwares on the devices before I tackle coding.

The worst job I’m looking at it getting the fakra cable for the dab radio signal from the cic through to the diversity antenna.
Appreciate 0
      07-06-2020, 08:06 AM   #12
smass
Lieutenant Colonel
393
Rep
1,578
Posts

Drives: 06 325i - 10 335i
Join Date: Sep 2010
Location: Scottsdale, AZ

iTrader: (1)

Garage List
2010 E90 335i  [0.00]
2016 F15 35i  [0.00]
2003 E53 3.0  [0.00]
2006 E90 325i  [0.00]
Its either pin 1 or 2. Does not need to be both.
Appreciate 0
      07-11-2020, 04:42 PM   #13
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Quote:
Originally Posted by smass View Post
Its either pin 1 or 2. Does not need to be both.
Cheers. Just swapped the dash today, bit of a pain but it’s in. Need to route the dab cable to the diversity unit from the cic and wire a few bits in. Noticed something that looks aftermarket plugged in under / behind the glove box. Think it might have been an aftermarket phone prep thing not entirely sure considering it already had Bluetooth phone prep. Still waiting on the fakra cables coming from Lithuania for the cic to cid and the idrive and cid power connectors before I can test it.
Appreciate 0
      08-16-2020, 04:25 PM   #14
Leegbr
Private
3
Rep
79
Posts

Drives: Bmw e92 320d
Join Date: Jun 2020
Location: Uk

iTrader: (0)

Wired the screen and connector to the quadlock and have managed to blow fuse 14. May have blown others but it was the first one I checked and is indeed blown. No power at all to the cic / screen / controller. Not going at all well this retrofit 😂 I’m fully expecting it to blow again when I stick a replacement fuse in.

Anyone know if it’s common to blow fuses by connection the screen and controller to the quadlock?
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:49 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST