[Hokie_BMW]

Hey guys so my clutch is slipping and so I'm about to order the 335iS. I'm wondering what other hardware I need. I read that the bellhousing bolts are one time use.

Can someone help me out with part numbers and quantities of other things I need to do the clutch swap? I've read through a bunch of threads but everyone seems to just say roughly what they bought and not exactly what.

Thanks!

[Abacus38]

Bumpped I would like to know too

[KeepRidingDirty]

Need a few things

-Bell Housing bolts are now steel, you need 5 of them.
-Get the 335is clutch and pressure plate kit, comes with new pressure plate bolts too which are aluminum, also comes with throw out bearing, fork and spring.
-Get a new pivot pin (plastic, only cost 99 cents)
-Pilot bearing (if you choose, but its a pain to replace)
-New transmission fluid (might as well while trans is out)

You can replace input and output seals if you want. If you're replacing the flywheel you should also do the rear main seal.

[Hokie_BMW]

Originally Posted by KeepRidingDirty

Need a few things

-Bell Housing bolts are now steel, you need 5 of them.
-Get the 335is clutch and pressure plate kit, comes with new pressure plate bolts too which are aluminum, also comes with throw out bearing, fork and spring.
-Get a new pivot pin (plastic, only cost 99 cents)
-Pilot bearing (if you choose, but its a pain to replace)
-New transmission fluid (might as well while trans is out)

You can replace input and output seals if you want. If you're replacing the flywheel you should also do the rear main seal.

Thanks. I saw 3 different bolts on ecs. Any part number you could give me?

I'll grab the other items as well. I'm waiting to take the trans out to see how the rms is because my car only has 60k on it.

[KeepRidingDirty]

Originally Posted by Hokie_BMW

Thanks. I saw 3 different bolts on ecs. Any part number you could give me?

I'll grab the other items as well. I'm waiting to take the trans out to see how the rms is because my car only has 60k on it.

All parts are from ECS Tuning

Clutch I bought ES#1897635 (clutch, pressure plate, plate bolts, fork, throwout bearing)
Gear fluid I bought, you need 2 ES#263482
Slave Cylinder ES#249122 (optional)
Clutch tool ES#199954 (You will need this unless you have one)
Spring clip for Clutch Fork ES#41237 (Cheap, just get it)
Trans bolts you need 5 ES#41947 (They are steel now so you never need to replace them again)
Pivot Pin ES#41216 (Cheap, just get it)
Pilot Bearing ES#4093 (Change it if you want, but it was a pain in the ass and I should have just left it)

Hope this helps

[Hokie_BMW]

Originally Posted by KeepRidingDirty

All parts are from ECS Tuning

Clutch I bought ES#1897635 (clutch, pressure plate, plate bolts, fork, throwout bearing)
Gear fluid I bought, you need 2 ES#263482
Slave Cylinder ES#249122 (optional)
Clutch tool ES#199954 (You will need this unless you have one)
Spring clip for Clutch Fork ES#41237 (Cheap, just get it)
Trans bolts you need 5 ES#41947 (They are steel now so you never need to replace them again)
Pivot Pin ES#41216 (Cheap, just get it)
Pilot Bearing ES#4093 (Change it if you want, but it was a pain in the ass and I should have just left it)

Hope this helps

Perfect! Thanks for the help!