Delete

Kreuger_ · 07-13-2020, 07:36 PM

Delete

FormerRotor · 07-15-2020, 04:49 PM

pretty sure I remember changing the pump and thermostat without removing the fan on my state-side 35d (did need to remove egr cooler, though).

EDIT: Here's an old post from @TorqueAddict from a thread in 2016...

Quote:

Originally Posted by TorqueAddict

...BTW following are the threads that i found searching the forums:

http://www.e90post.com/forums/showth...ght=thermostat

http://www.e90post.com/forums/showthread.php?t=1008568

Also try: Link

robnitro · 07-23-2020, 08:27 AM

Easy job but be careful to not cut yourself on the sharp edges of the pump or gasket.

RL18 · 07-23-2020, 02:03 PM

Quote:

Originally Posted by robnitro

Easy job but be careful to not cut yourself on the sharp edges of the pump or gasket.

I did that after I realized it was a metal gasket! Lots of blood. Also good idea to replace bolts and TORQUE to spec. I learned the hard way and had to rip it apart again, it doesn't seem real tight but any tighter it'll leak.

07-13-2020, 07:36 PM	#1
Kreuger_ Enlisted Member 0 Rep 41 Posts Drives: - Join Date: Feb 2019 Location: - iTrader: (0)	Delete Delete Last edited by Kreuger_; 09-09-2021 at 05:42 AM..
	Appreciate 0 Tweet Quote

07-23-2020, 08:27 AM	#3
robnitro Captain 160 Rep 803 Posts Drives: x5 35d e70 2011 Join Date: Sep 2016 Location: NYC area iTrader: (0)	Easy job but be careful to not cut yourself on the sharp edges of the pump or gasket.
	Appreciate 0 Quote