ATM BMW 335D Intake Kit

Arteen498 · 11-03-2017, 01:42 AM

Hi new to the forums and was wondering if anyone has installed the ATM intake yet. Any noticeable power or sound differences? How is the fit and finish? Thanks.

RED-d · 11-03-2017, 05:47 AM

I have one. It's not a fully enclosed system. Fit is tight. The way the air pipe goes into their box is quirky and instructions are lacking. I didn't realize I was doing it wrong until I popped a couple rivets, but that was on me I guess. Can't comment on power as the car is relatively new to me and I'm still learning it and I don't drive it that much. There is a change to the sound.

dmanb2b · 11-03-2017, 08:05 AM

There is a waiting list for the intake. It's that good if you are tuned. The ATM website has the dyno graph. You will also hear some wooshing and hising/turbo bark. I've been running mine for a year now. No complaints.

The facebook group has more details, but there is also a paper cone option soon to be released.

rulonger · 11-03-2017, 08:16 AM

Power gains - yes
More sounds from the engine bay - yes
Design and fit (the biggest limitation is the cramped engine bay and how the snorkel feeds at an angle) - 9/10
Quality of the parts - 10/10

Easy installation - I am not a skilled mechanic and it took me all of about 40 minutes to install. As the space is tight, you will have to do some wiggling. It uses the existing duct work and the cone filter enters the enclosure at a slight angle. That was the only confusion for me.

Gives the engine bay a nice look when installed.

lnxguy · 11-03-2017, 11:17 AM

Power gains from stock? Eh, probably nil. Although for your $350 it will sound better.

ASBSECU E93 · 11-04-2017, 02:14 PM

Quote:

Originally Posted by lnxguy

Power gains from stock? Eh, probably nil. Although for your $350 it will sound better.

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

mjn77 · 11-04-2017, 05:21 PM

That looks pimpin!!

RED-d · 11-04-2017, 06:01 PM

Quote:

Originally Posted by rulonger

Design and fit (the biggest limitation is the cramped engine bay and how the snorkel feeds at an angle) - 9/10

This^ is how I popped my rivets. Kept trying to get it strait. I also broke the plastic bezel

lnxguy · 11-04-2017, 06:30 PM

Quote:

Originally Posted by ASBSECU E93

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

Sure, but we aren't talking about a tuned car here.

Miko226 · 11-04-2017, 10:15 PM

Quote:

Originally Posted by ASBSECU E93

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

+1

Stock & Tuned both will sound better. As with any intake tuned cars will yield more gains.

ASBSECU E93 · 11-05-2017, 09:01 AM

Quote:

Originally Posted by ASBSECU E93

Quote:

Originally Posted by lnxguy

Power gains from stock? Eh, probably nil. Although for your $350 it will sound better.

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

Op didn't specify tuned or stock.

Thecastle · 11-05-2017, 04:09 PM

Quote:

Originally Posted by ASBSECU E93

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

Could you send us diesel owners a link to your before and after gains? I’m curious, as to what the actual gains are.

ASBSECU E93 · 11-05-2017, 04:17 PM

Quote:

Originally Posted by Thecastle

Quote:

Originally Posted by ASBSECU E93

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

Could you send us diesel owners a link to your before and after gains? I’m curious, as to what the actual gains are.

The thread can be searched - I don't have a link to the thread saved. @Iannone is the guy to ask in here.

Arteen498 · 11-05-2017, 10:41 PM

Sounds like I'm pre-ordering one. Thanks for the input and if any of you are thinking of a muffler delete, let it be know that there is no difference at all if you are still running the stock exhaust. I hated the stock tips so I ordered a set of 4in tips. When I was having them put on I decided to remove the mufflers too and it made no difference. On the bright side it looks a lot better now with the 4in tips.

bsmotorsport · 11-06-2017, 05:58 AM

Want one here in the UK but shipping seems a none starter

dmanb2b · 11-06-2017, 08:22 AM

Quote:

Originally Posted by Thecastle

Could you send us diesel owners a link to your before and after gains? I’m curious, as to what the actual gains are.

From the ATM website

https://cdn.shopify.com/s/files/1/18...00591288323323

Breathing_Pharaoh · 03-07-2018, 10:01 AM

Are there any videos of how the intake sounds when installed?

Torqu3 · 03-07-2018, 10:08 AM

Quote:

Originally Posted by Breathing_Pharaoh

Are there any videos of how the intake sounds when installed?

335dM · 03-07-2018, 07:11 PM

Quote:

Originally Posted by ASBSECU E93

Quote:

Originally Posted by lnxguy

Power gains from stock? Eh, probably nil. Although for your $350 it will sound better.

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

Quote:

Originally Posted by ASBSECU E93

Quote:

Originally Posted by lnxguy

Power gains from stock? Eh, probably nil. Although for your $350 it will sound better.

Tuned cars reflected a noticeable gain with this intake. My car was the test case.

20whp with an aggressive tune

RED-d · 03-07-2018, 11:15 PM

That video was dizzing and well, nothing...
I don't have a video or audio, but the best description I can describe from myself and others, is that you can hear a rushing wheeze every time it shifts. Almost like it's breathing. Sounds cool, but I wonder if it's because it isn't a closed box like the oem setup. Of course I don't have numbers but I hope it's breathing better than oem. If not, it sounds better.

PitaMan · 04-14-2018, 06:04 PM

Anyone have issues popping codes after install? I installed in stock 335d and got a P0101 and P0402 and went into limp mode. It was fine until i got on it then it went into limp mode. I removed the MAF sensor and cleaned it then tried it again and the same thing happen again. I reinstalled the stock air box and had no codes or issue.

nicefighter80 · 04-18-2018, 08:12 PM

Did you reset MAF adaptations using INPA or ISTA? Check your MAF connection plug.

11-03-2017, 01:42 AM	#1
Arteen498 Registered 4 Rep 2 Posts Drives: 2011 Bmw 335D M-Sport Join Date: Jul 2017 Location: San Diego iTrader: (0)	ATM BMW 335D Intake Kit Hi new to the forums and was wondering if anyone has installed the ATM intake yet. Any noticeable power or sound differences? How is the fit and finish? Thanks.
	Appreciate 0 Tweet Quote

11-03-2017, 05:47 AM	#2
RED-d Private First Class 27 Rep 189 Posts Drives: 2010 335d Sport, Tuned Join Date: Jun 2017 Location: SWFL iTrader: (0)	I have one. It's not a fully enclosed system. Fit is tight. The way the air pipe goes into their box is quirky and instructions are lacking. I didn't realize I was doing it wrong until I popped a couple rivets, but that was on me I guess. Can't comment on power as the car is relatively new to me and I'm still learning it and I don't drive it that much. There is a change to the sound.
	Appreciate 0 Quote

11-03-2017, 08:05 AM	#3
dmanb2b Banned 2125 Rep 3,368 Posts Drives: G07, F97, F30, E90, E46, E30 Join Date: Jul 2016 Location: NY iTrader: (5)	There is a waiting list for the intake. It's that good if you are tuned. The ATM website has the dyno graph. You will also hear some wooshing and hising/turbo bark. I've been running mine for a year now. No complaints. The facebook group has more details, but there is also a paper cone option soon to be released.
	Appreciate 0 Quote

11-03-2017, 08:16 AM	#4
rulonger Lieutenant 111 Rep 529 Posts Drives: 2011 335d E90 & 2010 328i E91 Join Date: Feb 2015 Location: NC iTrader: (0)	Power gains - yes More sounds from the engine bay - yes Design and fit (the biggest limitation is the cramped engine bay and how the snorkel feeds at an angle) - 9/10 Quality of the parts - 10/10 Easy installation - I am not a skilled mechanic and it took me all of about 40 minutes to install. As the space is tight, you will have to do some wiggling. It uses the existing duct work and the cone filter enters the enclosure at a slight angle. That was the only confusion for me. Gives the engine bay a nice look when installed. __________________ 2011 335d Deep Sea Blue on Beige (stock except for the cheap ass wheels from PO) 2010 328i Tasman Green on Saddle (stock)
	Appreciate 3 dmanb2b2124.50 iaknown425.00 Chief Orman671.00 Quote

11-03-2017, 11:17 AM	#5
lnxguy Lieutenant Colonel 357 Rep 1,723 Posts Drives: 2009 335D Join Date: Jun 2016 Location: Barrie iTrader: (1)	Power gains from stock? Eh, probably nil. Although for your $350 it will sound better. __________________ '09 335D
	Appreciate 0 Quote

11-04-2017, 05:21 PM	#7
mjn77 Lieutenant Colonel 1073 Rep 1,956 Posts Drives: E90 M3 LCI Jerez Black Join Date: Apr 2015 Location: Herts, UK iTrader: (2) Garage List 2011 BMW M3 [0.00]	That looks pimpin!!
	Appreciate 0 Quote

11-05-2017, 10:41 PM	#14
Arteen498 Registered 4 Rep 2 Posts Drives: 2011 Bmw 335D M-Sport Join Date: Jul 2017 Location: San Diego iTrader: (0)	Sounds like I'm pre-ordering one. Thanks for the input and if any of you are thinking of a muffler delete, let it be know that there is no difference at all if you are still running the stock exhaust. I hated the stock tips so I ordered a set of 4in tips. When I was having them put on I decided to remove the mufflers too and it made no difference. On the bright side it looks a lot better now with the 4in tips.
	Appreciate 0 Quote

11-06-2017, 05:58 AM	#15
bsmotorsport Enlisted Member 3 Rep 32 Posts Drives: BMW E91 335d Join Date: Mar 2016 Location: Gods Own County iTrader: (0)	Want one here in the UK but shipping seems a none starter
	Appreciate 0 Quote

03-07-2018, 10:01 AM	#17
Breathing_Pharaoh New Member 5 Rep 14 Posts Drives: 2011 BMW 335d Join Date: Jan 2018 Location: Chino Hills, CA iTrader: (0) Garage List 2011 BMW 335D [0.00]	Are there any videos of how the intake sounds when installed?
	Appreciate 0 Quote

03-07-2018, 11:15 PM	#20
RED-d Private First Class 27 Rep 189 Posts Drives: 2010 335d Sport, Tuned Join Date: Jun 2017 Location: SWFL iTrader: (0)	@Torqu3 That video was dizzing and well, nothing... I don't have a video or audio, but the best description I can describe from myself and others, is that you can hear a rushing wheeze every time it shifts. Almost like it's breathing. Sounds cool, but I wonder if it's because it isn't a closed box like the oem setup. Of course I don't have numbers but I hope it's breathing better than oem. If not, it sounds better.
	Appreciate 0 Quote

04-14-2018, 06:04 PM	#21
PitaMan PitaMan 2 Rep 2 Posts Drives: BMW 335D Join Date: Sep 2017 Location: Florida iTrader: (0)	Anyone have issues popping codes after install? I installed in stock 335d and got a P0101 and P0402 and went into limp mode. It was fine until i got on it then it went into limp mode. I removed the MAF sensor and cleaned it then tried it again and the same thing happen again. I reinstalled the stock air box and had no codes or issue.
	Appreciate 0 Quote

04-18-2018, 08:12 PM	#22
nicefighter80 New Member 0 Rep 5 Posts Drives: BMW 335d Join Date: Dec 2017 Location: Ohio iTrader: (0)	Did you reset MAF adaptations using INPA or ISTA? Check your MAF connection plug.
	Appreciate 0 Quote