[ozerux]

Hi All,
I have 2005 e90 m47 with retrofitted Cruise Control.
Recently I've also retrofitted High kombi/Cluster.
VIN was rewritten by some Dude works without any issues or "dots".
During Cluster self check Cruise Control needle is visible, but it does not work with engage CC.
Is it possible to code and enable needle?

[Hoody007]

Do you have the correct module (LDM) installed as well?

[ozerux]

Nope.
I've only changed wheel clock spring with Cruise Control switch and did some coding.
I only installed Cruise Control, NOT ACC. So I don't have LDM.
Is LDM necessary for simple Cruise Control and needle in the cluster?

[ptpending]

this needle operate only with 6-cylinder cars or x-drive cars, they have more advanced DXC module
may be LDM will help you, but it wasn't installed on any m47 cars

[P14kle]

It IS possible. I have it on my 320d M47tu2 e91. It takes a HiKombi which you have, and some coding to get the marker to move round to the selected speed. Also get the digital speed displayed for a few seconds IIRC.

I cannot remember off the top of my head what coding needs to be changed, but I did it myself and used info from this forum along with google searches to get what I needed.

Sorry for lack of data, but am at work currently and would need to go back through my coding lists etc to gleam thru and get exact coding lines.


Check this thread out.

https://www.e90post.com/forums/showthread.php?t=505937

[ozerux]

Thanks to ALL!!
Simple coding from this screen shot did a trick. Needle works!!!


Now new questions

On the ride side around tachometer is red line indicator. I know that on e60 it corresponds to engine temperature. Here in this High cluster it's visible like it can move also. Is it possible somehow to activate it?

[Dx11]

Wait a second, didn't every single one of this car have cruise control standard from the factory? Because there are no e9x for sale second hand without cruise control here.

[ptpending]

Originally Posted by Dx11

Wait a second, didn't every single one of this car have cruise control standard from the factory? Because there are no e9x for sale second hand without cruise control here.

there are plenty of e9x in europe withou cruise control

[ptpending]

Originally Posted by ozerux

Attachment 3141139

Thanks to ALL!!
Simple coding from this screen shot did a trick. Needle works!!!


Now new questions

On the ride side around tachometer is red line indicator. I know that on e60 it corresponds to engine temperature. Here in this High cluster it's visible like it can move also. Is it possible somehow to activate it?

perfect
good to know for me that this is possible for m47

[P14kle]

Originally Posted by ozerux

Attachment 3141139

Thanks to ALL!!
Simple coding from this screen shot did a trick. Needle works!!!


Now new questions

On the ride side around tachometer is red line indicator. I know that on e60 it corresponds to engine temperature. Here in this High cluster it's visible like it can move also. Is it possible somehow to activate it?

There is no stepper motor in the e9* diesel clocks I am led to believe..
Maybe in the M3 clocks but certainly not to lesser models of the range.
This is what I was told, and im sure if you take the clocks apart you will find them empty where the stepper motor would go to activate the moving rev indicator.