[szape]

Recently i had to replace right angel eye bulb. After that 4 errors appeared (rear right turn signal, front left turn signal, rear left fog light, rear right taillight). All was working, turn signals blinked double speed. Cleared errors with Carly but all 4 reappeared. Checked for shorts, no shorts found and all bulbs voltage was above 12 Volts. Deleted error codes with ISTA/D, reprogrammed FRM module with ISTA/P but errors are still appeared again. Next day i deleted error codes, disconnected FRM module and reconnected it, no errors since. Is it possible that a disconnect/reconnect solved the problem or it might come back randomly?

Thanks.