|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CP-E intercooler / oil cooler install
|
|
06-20-2013, 09:35 AM | #1 |
The dude abides
50
Rep 265
Posts |
CP-E intercooler / oil cooler install
For those of you with this combination installed, does the oil cooler mount in front of the intercooler core? As my car doesn't currently have an oil cooler, I'm quite interested in this setup.
I've seen mixed reviews on the FMIC and would appreciate input which current users may have. |
06-20-2013, 09:58 AM | #2 |
Captain
148
Rep 965
Posts
Drives: e92 m3
Join Date: Feb 2011
Location: staten island ny
|
CPE oil cooler mounts where stock one would be
__________________
e92 m3 dct
gintani stage 2+ full ethanol custom pulley and meth kw clubsport,ap racing radical,volk te37sl,akrapovic rear,recaro profi xl,voltphreaks battery |
Appreciate
0
|
06-20-2013, 09:27 PM | #4 |
Private First Class
3
Rep 177
Posts |
OP is asking about the FMIC OC combo. The OC mounts on top of FMIC.
I'm pretty happy with my setup. But I was not that concerned about having the lowest inlet air temps since I knew I'd add meth. I had a concern about high oil temps causing limp mode. It's worked out good. After several track days I've yet to limp. Meth helps oil temps too but I would limp for sure without the extra OC.
__________________
2008 E90 335i | PROcede Rev 2.5 | PWM Meth | CP-E FMIC + OC | AR catless ceramic DP | BMS DCI | Wavetrac LSD | MORR MonoForged VS8.2 | Michelin PSS
|
Appreciate
0
|
06-21-2013, 09:20 AM | #5 |
I even mod my cereal
246
Rep 3,441
Posts
Drives: 11 ZCP DCT M3 14 328d 21 GT4
Join Date: Aug 2009
Location: Northern Va
|
Def on top.....the only place it can mount (two screw locations) without hanging around loose, which is a bad idea.
__________________
2011 Mineral White M3 ZCP - Opticoat, Ventureshield, some CF, B&B exhaust, AFE Intake Vorsteiner VFF 101s Ohlins
2014 Mineral White 328d Xdrive Wagon - Opticoat, Ventureshield, B8s, H&R, Apex SM-10s Hawk Pads 2021 718 Cayman GT4 - Fire extinguiser |
Appreciate
0
|
06-21-2013, 04:19 PM | #6 |
Lieutenant Colonel
172
Rep 1,909
Posts |
+1 i didnt get the oil cooler with mine, but the mounting location is on top of the fmic. there are tabs.
__________________
Current: 2017 F30 340i xdrive
Previous: 2008 e92 335i coupe: RB turbos, mach 116 race fuel, methanol, alot of boost. Previous: 2003 Honda Accord V6 coupe: AEM V2, zex 75 wet shot (sold) |
Appreciate
0
|
Bookmarks |
|
|