|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Removing BMW Audio All Together
|
|
11-25-2010, 07:54 PM | #1 |
Registered
1
Rep 1
Posts |
Removing BMW Audio All Together
I am looking to add Bluetooth, Nav and Ipod to my 2007 E92 335i with professional HU and Logic 7. From all the posts in this forum, it has become clear that replacing any one part of the audio system (HU, Amp or Speakers) require specialized interfaces. My question to the group is this:
If I disconnect the factory HU, add aftermarket all-in-on Nav unit, install aftermarket amps and use the factory speakers (for the time being) will I create a situation where something will stop working, or produce tons of errors? To further qualify, I have no factory alarm either. My concern at this point is also how to add a fibre optic block to complete the loop if the radio has been removed. I also don't see much in the way of how-to's for adding the steering wheel interface I know this is a large number of questions, but I don't want to turn my car into a long term care project. Any and all advice is appreciated on this. |
11-25-2010, 08:00 PM | #2 |
Lieutenant General
2049
Rep 13,378
Posts |
Not an expert but FYI
http://www.e90post.com/forums/showthread.php?t=365866
lots of info on the system in the above threads and links I think you need Can bus adaptors to run the steering wheel controls with your new HU There is also some kind of terminator for the optical bus you may have do other stuff to it I'm not real sure on that. Some people move there existing head unit to the trunk(hooked up the same) or somewhere else so there is no change that the rest of the car sees Last edited by ctuna; 11-26-2010 at 01:27 AM.. |
Appreciate
0
|
11-25-2010, 08:07 PM | #3 |
Banned
261
Rep 7,089
Posts
Drives: '06 AW 330xi
Join Date: Mar 2009
Location: North Jersey/Philly/NYC
|
Removing the OEM radio disables the gongs you hear when your car is running on "fuel reserve," don't have your seatbelt on, bulb out, etc.
You also lose OEM BMW assist. To keep these features, you need to relocate the OEM radio to the trunk with the harness in one of the threads here in the audio section. From there you can recode the HU from L7 to Hi-Fi so you get an analog signal. However, I think you need something to clean up the proscessing from the HU so you have a useable signal for your amps...I may be confusing this with L7. Once you do the above, you can add amps, aftermarket HU, speakers, sub, etc. while retaining the OEM gongs, BMW assist, etc. Search for "relocate OEM head unit" or the like to find the thread I am talking about. |
Appreciate
0
|
11-25-2010, 11:35 PM | #5 |
Banned
261
Rep 7,089
Posts
Drives: '06 AW 330xi
Join Date: Mar 2009
Location: North Jersey/Philly/NYC
|
|
Appreciate
0
|
11-25-2010, 11:37 PM | #6 |
Brigadier General
294
Rep 3,201
Posts |
Basically, you're going to lose assist and BMW bluetooth if you relocate the head unit. Relocating the head unit is a way to keep the HU on the data bus, so that if the car goes in for service, the dealer computer doesn't "see" a missing head unit, or error codes for assist and bluetooth not working - and then pukes all over itself when it tries to do a software update. Retaining aa hidden head unit keeps all that working.
|
Appreciate
0
|
11-27-2010, 10:16 PM | #7 |
The One
10
Rep 61
Posts
Drives: 2008 m135i coupe sport package
Join Date: Nov 2010
Location: Traverse City, Michigan
|
Yikes, I want to add Bluetooth and iPod integration, and maybe an extra amp and sub, but I don't know if it would be better to get the BMW upgrades for my OEM HU, or swap it for an Alpine or Pioneer.
|
Appreciate
0
|
Bookmarks |
Tags |
aftermarket, remove, replace |
Thread Tools | Search this Thread |
|
|