[Masher]

Has anyone in toronto/gta managed to fix their front wastegate rattle by adding washers to pull the actuator rod away further away so it takes out the extra slop & wear causing the rattle?

Looking to do this, but would rather go to someone who's done it before

[zort]

So your looking to take the turbos down or you expect to get to the waste-gates with the turbos on the car ?

[Godla26]

Same here
I am in Ontario , is there anybody in gta?

[ccourteau82]

Hey guys. I’m down in Niagara and did the job myself a couple months ago in a couple hours and that was taking my time. Just use the cut out washer method and follow the instructions listed by waikiki35 in this thread:

http://www.e90post.com/forums/showth...=890145&page=2

[leandrodasilva]

Originally Posted by ccourteau82

Hey guys. I’m down in Niagara and did the job myself a couple months ago in a couple hours and that was taking my time. Just use the cut out washer method and follow the instructions listed by waikiki35 in this thread:

http://www.e90post.com/forums/showth...=890145&page=2

Hey I was wondering if we could communicate together in regards to you doing this for me? I live in Toronto but would have no problem driving down and paying for your time to do both adjustments front and rear. I made an account on here specifically to message you. Cheers. Inbox me and I will communicate my cell to text. Thank you for your help.

[F36Vader]

Also interested in this

[Shiraz22]

Anyone manage to do this?

[ccourteau82]

Guys just read post I linked above, it really isn't that hard to do yourself. I used a magnetic pickup tool to slide the washers over the bolt so you don't have to remove it.

If all else fails just call up Ivo at Columbus Automotive Services - Ivo (416)882-1439...he used to be one of the great N54 shops in the GTA a few years back. Hopefully he is still in the game. He has done all the typical N54 jobs a 1000 times over. Great guy, fair prices....