E90Post
 


GetBMWParts
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Heated seat retrofit coding



Reply
 
Thread Tools Search this Thread
      11-30-2019, 03:20 PM   #1
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Heated seat retrofit coding

Hi everyone!

I have seen some posts about heated seat retrofit and coding + watched tonns of youtube videos about coding but nothing from mentioned actually works for me.
The deal is - I have done wiring to fuse box and junction box now (manual seats + heating modules were installed from another car). I have connected through NCSExpert, tried adding $494 to VO (don't know if it happened) and coding some modules but I think my knowledge is not enough..
Now my car shows airbag sign and seat belt sign error.

And heated seats don't work of course.

Maybe someone could help me out? Like explain it real simple..?
How to add new modules, how to and what to code..?
I just don't want to mess up car and don't trust "coding experts" in my small country

My set-up is:
e90, 2005, 2.0 diesel.
NCS expert + NCS dummy
K+DCAN

Any help would be much appreciated. Thanks
Appreciate 0
      11-30-2019, 03:33 PM   #2
sdbmwcoding
Lieutenant
106
Rep
594
Posts

Drives: BMW M3
Join Date: May 2019
Location: San Diego

iTrader: (0)

What modules did you code after adding the VO?
Appreciate 0
      11-30-2019, 05:02 PM   #3
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Quote:
Originally Posted by sd********* View Post
What modules did you code after adding the VO?
CAS and FRM. I just did "lesen" and "codieren" without any "checking".
Somewhere there was written "seat module (new)". I remember pressing it and some kind of error came up and after that error lights appeared. It could be unrelated but that's something I remember..
Appreciate 0
      11-30-2019, 06:36 PM   #4
sdbmwcoding
Lieutenant
106
Rep
594
Posts

Drives: BMW M3
Join Date: May 2019
Location: San Diego

iTrader: (0)

Quote:
Originally Posted by ReinisO View Post
Quote:
Originally Posted by sd********* View Post
What modules did you code after adding the VO?
CAS and FRM. I just did "lesen" and "codieren" without any "checking".
Somewhere there was written "seat module (new)". I remember pressing it and some kind of error came up and after that error lights appeared. It could be unrelated but that's something I remember..
You FA write to CAS and NFRM, after that you need to factory code JBBF and CIC/CAPPL with SG_Codieren.
Appreciate 0
      12-01-2019, 01:58 AM   #5
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Quote:
Originally Posted by sd********* View Post
You FA write to CAS and NFRM, after that you need to factory code JBBF and CIC/CAPPL with SG_Codieren.
Hi!

You are so kind, thank you for your input.

What does the first part mean? "FA write to CAS and NFRM"?
And how can I factory code JBBF and CIC/CAPPL?

Thanks
Appreciate 0
      12-01-2019, 02:24 AM   #6
sdbmwcoding
Lieutenant
106
Rep
594
Posts

Drives: BMW M3
Join Date: May 2019
Location: San Diego

iTrader: (0)

Quote:
Originally Posted by ReinisO View Post
Quote:
Originally Posted by sd********* View Post
You FA write to CAS and NFRM, after that you need to factory code JBBF and CIC/CAPPL with SG_Codieren.
Hi!

You are so kind, thank you for your input.

What does the first part mean? "FA write to CAS and NFRM"?
And how can I factory code JBBF and CIC/CAPPL?

Thanks
Ok so open up NCS Expert

F1
F3 choose CAS
F2 and add $494
F6 back
F4 process ecu and choose CAS
F2 change job and choose Fa_write
F3 execute job
F1 change ecu and choose NFRM
F3 execute job


Close out of ncs expert and open if back up again

F1
F3 choose CAS
F6 back
F4 process ecu and choose CIC/CAPPL (CIC for 09+, CAPPL for 06-08)
F3 Execute Job
F1 change ecu to JBBF
F3 execute job


Done. It's been a while since I've done this programming retrofit but I believe there may be a few lines you gotta change in JBBF but go ahead and do the above first and see if they work after.
Appreciate 0
      12-01-2019, 07:00 AM   #7
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Quote:
Originally Posted by sd********* View Post
Ok so open up NCS Expert

F1
F3 choose CAS
F2 and add $494
F6 back
F4 process ecu and choose CAS
F2 change job and choose Fa_write
F3 execute job
F1 change ecu and choose NFRM
F3 execute job


Close out of ncs expert and open if back up again

F1
F3 choose CAS
F6 back
F4 process ecu and choose CIC/CAPPL (CIC for 09+, CAPPL for 06-08)
F3 Execute Job
F1 change ecu to JBBF
F3 execute job


Done. It's been a while since I've done this programming retrofit but I believe there may be a few lines you gotta change in JBBF but go ahead and do the above first and see if they work after.

Hi!

So the problem is:

1. I don't see NFRM after "change ECU" there's only FRM

and

I don't have/see CIC or CAPL (I think because car is 2005)

What should I choose?

Thanks!

Last edited by ReinisO; 12-01-2019 at 07:27 AM..
Appreciate 0
      12-01-2019, 07:07 AM   #8
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Quote:
Originally Posted by ReinisO View Post
Hi!

So the problem is:

1. I don't see NFRM after "change ECU" there's only FRM

and

I don't have/see CIC or CAPL (I think because car is 2005)

What should I choose?

Thanks!
Modules I have:
2RAD
4DMOT
ABG
AHM
CAS
DSC
DWAI
DWAS
EKP
FRM
FZD
IHK
JBBF
KOMBI
LDM

Last edited by ReinisO; 12-01-2019 at 07:27 AM..
Appreciate 0
      12-01-2019, 02:31 PM   #9
sdbmwcoding
Lieutenant
106
Rep
594
Posts

Drives: BMW M3
Join Date: May 2019
Location: San Diego

iTrader: (0)

Choose FRM, forgot to check the year of your car in the original post. After adding the VO ($494), skip the CAPPL/CIC step and just default code JBBF
Appreciate 1
      12-02-2019, 12:21 PM   #10
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Quote:
Originally Posted by sd********* View Post
Choose FRM, forgot to check the year of your car in the original post. After adding the VO ($494), skip the CAPPL/CIC step and just default code JBBF
Hi! Tried it and didn't work.. Everything stayed the same. Any other ideas?
Appreciate 0
      12-03-2019, 12:02 PM   #11
ptpending
Colonel
245
Rep
2,094
Posts

Drives: e91
Join Date: Dec 2013
Location: vilnius

iTrader: (1)

you also need to code IHK module
__________________
E91 2006. Retrofits:High beam assistant, Individual Audio, Autodim mirrors, CIC, Combox(USB and Bluetooth), Electric Sport Seats, Light package, Front PDC, Heated Steering Wheel, Happy Robot, Climate Comfort Windscreen, Blackline rear lights.
Appreciate 0
      12-06-2019, 01:53 AM   #12
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

Quote:
Originally Posted by ptpending View Post
you also need to code IHK module
Hi!

Thanks for update.

Tried all of this but nothing seems to work.
INPA shows "seat module (new)" and when clicking on it says that thewre is no communication.

I think all the wiring should be fine (from BMW heated seat retrofit guide).

Maybe you have any other ideas I could try?

Thanks!
Appreciate 0
      12-06-2019, 07:02 AM   #13
ptpending
Colonel
245
Rep
2,094
Posts

Drives: e91
Join Date: Dec 2013
Location: vilnius

iTrader: (1)

if you have manual seats there will be no new modules for coding
simple heating module communicate using PWM signal from JBE
to enable this function you should code IHK and JBE modules with option added to FA
__________________
E91 2006. Retrofits:High beam assistant, Individual Audio, Autodim mirrors, CIC, Combox(USB and Bluetooth), Electric Sport Seats, Light package, Front PDC, Heated Steering Wheel, Happy Robot, Climate Comfort Windscreen, Blackline rear lights.
Appreciate 0
      12-12-2019, 01:22 PM   #14
ReinisO
New Member
0
Rep
9
Posts

Drives: 2006 e90
Join Date: Oct 2019
Location: Riga, Latvia

iTrader: (0)

thank you sooo much!

it happened, seats are working. so thankful!
Appreciate 0
      01-19-2020, 08:15 AM   #15
david in germany
Lieutenant Colonel
557
Rep
1,584
Posts

Drives: 118i
Join Date: Nov 2011
Location: Mannheim Germany

iTrader: (2)

sd*********, thank you!
__________________
2009 118i Monaco Blue "Maximillion"
2009 335i Saphire Black M Sport "Leopold" Cobb tune, Mishimoto FMIC, Cobb charge pipe, Forge diverter valves, Cyba scoops and M Individual Audio retrofit.
2011 328i Titan Silver M Sport "Franzel" <--Wife's car
Appreciate 0
Reply

Bookmarks

Tags
coding, e90, retrofit

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:03 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST