[Will335i]

I recently wrapped up the installation portion of my iDrive retrofit. I have an 07 335i that did not have an iDrive and I am going to a CIC without an emulator. I used NCSExpert to change my VO. I changed the build date from 1206 to 0909. I added S609, S620, S6UH, and S6VA and I removed S663. After I updated the CAS and NFRM I updated the CIC. After the CIC rebooted the CID screen stayed blank. I can see the blacklighting on but nothing displays. The radio still works just no display. When I look at the VIN on each module instead of a VIN the CID just shows YYYYYYY.

I plan to use WinKFP to change the vin on the CIC and CID but the program wont even start. I downloaded BMW Tools from Bimmergeeks website. Any thoughts on getting it working or where I can get a working version of WinKFP?

Thanks,
Will

[mizta insane]

Originally Posted by Will335i

I updated the CIC.


I plan to use WinKFP to change the vin on the CIC and CID but the program wont even start. I downloaded BMW Tools from Bimmergeeks website. Any thoughts on getting it working or where I can get a working version of WinKFP?

Thanks,
Will

What did you use to flash cic? Cic should be flash with ICOM A and B only.

Check with tool32 if cic return state 12

[Will335i]

I ended up getting a emulator and putting that in. I am still having issues with the display. It powers up, I can see the backlighting come one, but nothing is displayed.

How do I check the CIC return state?

I believe the CID got corrupted so I am wondering if there is a way to recover it. Below is what I get when I execute the aif_lesen job on Tool32

AIF_FG_NR =YYYYYYY
AIF_FG_NF_LANG =YYYYYYY
AIF_DATUM = 22.08.2008
AIF_ZB_NR = 9193745
AIF_SW_NR =
AIF_BEHOERDEN_NR =
AIF_SERIEN_NR =
AIF_KM = 0
AIF_PROG_NR =

Any way to recover the missing information?

[mizta insane]

Originally Posted by Will335i

How do I check the CIC return state?

In tool32 run the job:
flash_programmier_status_lesen

post result

[Will335i]

Satz : 0
OBJECT = cicmr
SAETZE = 1
JOBNAME = flash_programmier_status_lesen
VARIANTE = CICMR
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
JOB_STATUS = OKAY
FLASH_PROGRAMMIER_STATUS_TEXT = Normalbetrieb
FLASH_PROGRAMMIER_STATUS = 1 00 01 ..
_TEL_AUFTRAG = 5 Bytes
0000 : 82 63 F1 31 0A ?cñ1.
_TEL_ANTWORT = 7 Bytes
0000 : 83 F1 63 71 0A 01 53 ?ñcq..S

[Will335i]

I can PM you the output of the UIF function in INPA as well if that helps