[radeohedca]

I have the same issue... changed my seats without paying heed to disconnecting the battery (idiot), now I'm getting "Passenger Restraint System Malfunction" and airbag lights.

I read elsewhere that the error will go away by itself after a certain amount of driving providing a real problem doesn't exist. Is this true ?

I have limited exposure to coding, I found it to be convoluted especially because
the information is scattered, had a hard time getting everything set up and the programs are unintuitive ("It's easy when you know how").

Thanks.

[dbworld4k]

Originally Posted by onebadmofo

Choose your chassis, then go to Karro-something, go to airbag, press F4 to get error codes and F5 to clear them

Hate to bump an old thread, but I'm having the same issues. I used INPA following be above, INPA says it cleared them, but the lights still stay. Customer says the lights came on after he replaced the battery (he has not registered or coded it). Not sure if the two are related.

[dbworld4k]

Originally Posted by dbworld4k

Hate to bump an old thread, but I'm having the same issues. I used INPA following be above, INPA says it cleared them, but the lights still stay. Customer says the lights came on after he replaced the battery (he has not registered or coded it). Not sure if the two are related.

Figured it out: the small connector connector to the BST was not plugged in when the battery was replaced. This resulted in a 93B2 code (for the BST). Plugged it back, cleared the errors via INPA, registered the battery and all is well!