[nvschell]

Hello everyone, I have decided to start a youtube channel. I will be posting a lot of different things but for now focusing on my 335xi. I know there are other write-ups out there on the regulator but wanted to make a more in depth version in a video format. If you have any questions feel free to ask. Thanks everyone!

Video can be found here V

[ssdara]

Thanks man! The door handle revonnect at end was silly. Another video incorrectly showed how to do it. You showed the right way.

One thing I want to note I couldnt find on any guides out there is
1)(Needs replacement regulator!) If your window is stuck in the door and you cant pull it up, you might go ahead and cut the cable on the regulator that is snagged so then you can move window up and tape it.
2) I could not get my window to seat properly. If you compare your new green clip w old. You will notice the old has black grommets on it that already have identions from the window. I had to replace the grommet closer to B-Pillar w the old grommet to get the window to come down that extra 1/4 inch to seat correctly. For some reason mine were way too stiff

[Silnismo]

This was very helpful, thanks!

[Silnismo]

Finally took some time to change out the regulator and followed this DIY

Great video, you covered everything needed to do the job.

[nazzarto]

I used this! Very helpful thanks!