[ccfj1]

Hi All.

I have 2011 cic setup, screen, cic base unit and controller, this is not a Dab unit.

All in good condition, the screen has a few marks, but is not bad and has no dead pixels.



Updated to the latest Map firmware 2019-1 Prem and has a lifetime FSC code. I can supply the FSC hex file so you can generate you own map codes if you like.

Also Updtated the Gracenote database too.



Great upgrade from CCC.. will need coding to car (so your options are right).

If you want VIN coding, I can get this done for you (extra).

Looking for £500 plus postage (or offers). Can pickup if requied, Paypal gift or F&F.

I can make this plug and play with an emulator (no vin coding), at extra cost.

Pm me for details about the Plug and play options.

[nomiS330d]

WOW! That sounds cheap! I thought this would be closer to a grand. Mines been done but you have reminded me I need to update my maps from 2014 somehow.
GLWTS.

[ccfj1]

Cheers mate.

Maps are easy enough mate.

PM me if you get stuck.

[ccfj1]

Bump,

I can activate this unit for any car, or code it to your vin.

[Nel2014]

Apart from the double scoop dash will I need anything else?

[ccfj1]

A couple of leads, i can maybe throw in the dispaly lead.

You may also need the usb lead, for the glove box (i have one it its non bmw)

If you dont have anything already, then you may need a trim panel, you may need the power and bus retrofit looms for the controller and screen as a non nav car wont have these, I could probably make you one TBH.

And the controller/console trim (I know where you can get one).

[johnscales]

Interested in retrofitting my CCC unit.
What would it take to get this upgrades fully functioning in my vehicle.
2007 year 335i.
I do have Sat nav.
I don't have a usb hard drive.
I can't stream music via blue tooth (I use the input aux socket under the armrest)
I do have blue tooth for phone calls.

[ccfj1]

Hi John.

You would also need, the pink HSD lead (that goes from the cic to the screen), the usb lead that goes to the glove box and either a emulator or a vin recode of the cic.

You will also need to code the vo from you car into the cic (blank ncsexpert file will do the trick).

but if you tell me what audio system you have and what phone module, i can code them up so they should work when installed.

You will also need need to re-pin the power plug to the screen.

Everything else should be plug and play.