[Procede related] Engine malfunction

clairvoyant · 07-17-2009, 01:20 PM

I am trying to sort out if Engine malfunction - Reduced Power problems are something that I need to bring to the dealer or something that I can get resolutions from Vishnu Tuning.

Since that Engine malfunction - Reduced Power is very elusive on my
car and happens very intermittently,
What are common Procede related
errors, codes [and resolutions] which trigger that Engine malfunction -
Reduced Power messages?

Thank You

jpsimon · 07-17-2009, 01:22 PM

you'll have to give us more info than that... under what conditions does it occur... mods.... etc etc etc...

OpenFlash · 07-17-2009, 01:37 PM

OP- as suggested over email, you will need to read the code. If you have a rev 2, that should be easy to do. There are no "common" faults induced by the PROcede. Just common issues that become more appearant when you add 80hp (leaky pipes/lines, bad plugs, faulty coils, etc). The code will tell us were the problem is. Just decide if you want to troubleshoot the problem with us offline or with the forum.

Regards,
shiv

roozie2001 · 07-17-2009, 02:04 PM

its retarded when people get on here and try to put down procede or JB. call the company. both guys are good at troubleshooting. both have good Customer service. Neither want a tarnished reputation. in business thats all you have.

clairvoyant · 07-17-2009, 02:13 PM

Wow, slow down...dude....
I am not trying to put down procede or JB.

I am just trying to get info from people who may experience the same situation as me.
I was just driving at normal speed when I got that Engine Malfunction - Reduced Power error. Everything was normal. I tried to read the code from that datalogging features, it didn't register any code.
I followed this instructions:
http://www.vishnutuningforum.com/for...read.php?t=412

I will try again if I get that error message.

Quote:

Originally Posted by roozie2001

its retarded when people get on here and try to put down procede or JB. call the company. both guys are good at troubleshooting. both have good Customer service. Neither want a tarnished reputation. in business thats all you have.

creaminz · 07-18-2009, 01:43 PM

Did u check your coolant? It happend to me at least 4 times due to coolant leak. For some reason coolant sputtered all over, check the level and was pretty much empty. I added BMW coolant mixed with water and everything was fine for awhile then engine malfunction happened again when outside temp reached 109 degrees. Not sure it has anything to do with weather but it happens when it's hot.

clairvoyant · 07-19-2009, 09:27 AM

No coolant leak. Coolant level is normal.
I ran the scan, I got DME error code 12543 Exhaust fume turbocharger low side
(based on the Excel spreadsheet code list).
I ran Map 2 (see attached).

Shiv, I need help here

. Thank You

kptaylor · 07-19-2009, 10:21 AM

Unlike the OP, we're not "clairvoyant", so diagnosing codes w/o info is a little difficult...

That code suggests a boost leak, so what mods do you have? Do you mean you're running Stage 2 rather than Map 2? That suggests mods, so be a little more clear so people can try to help you out.

clairvoyant · 07-19-2009, 11:19 PM

I apologize for the terminology confusion. Yes, I loaded "Stage 2 6MT Map1=Map2."
My mods are:
-Ultimate Racing High-Flow Catted Downpipes
http://************/km7xx8
-Ultimate Racing Cold Air Intake
http://www.ultimate-racing.com/Produ...5i_S_CAI.shtml

This morning:
I cleared the code, took off my Procede, and brought the car to the dealer.
No boost leak detected.

Quote:

Originally Posted by kptaylor

Unlike the OP, we're not "clairvoyant", so diagnosing codes w/o info is a little difficult...

That code suggests a boost leak, so what mods do you have? Do you mean you're running Stage 2 rather than Map 2? That suggests mods, so be a little more clear so people can try to help you out.

07-17-2009, 01:20 PM	#1
clairvoyant Major 79 Rep 1,032 Posts Drives: Bavarian Manure Wagon (BMW) Join Date: Oct 2007 Location: 45°19′20″N, 75°50′0″W iTrader: (5) Garage List 2007 335i [5.24]	[Procede related] Engine malfunction - Reduced Power I am trying to sort out if Engine malfunction - Reduced Power problems are something that I need to bring to the dealer or something that I can get resolutions from Vishnu Tuning. Since that Engine malfunction - Reduced Power is very elusive on my car and happens very intermittently, What are common Procede related errors, codes [and resolutions] which trigger that Engine malfunction - Reduced Power messages? Thank You
	Appreciate 0 Tweet Quote

07-17-2009, 01:22 PM	#2
jpsimon Team Zissou 3065 Rep 10,197 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	you'll have to give us more info than that... under what conditions does it occur... mods.... etc etc etc...
	Appreciate 0 Quote

07-17-2009, 01:37 PM	#3
OpenFlash 1737 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	OP- as suggested over email, you will need to read the code. If you have a rev 2, that should be easy to do. There are no "common" faults induced by the PROcede. Just common issues that become more appearant when you add 80hp (leaky pipes/lines, bad plugs, faulty coils, etc). The code will tell us were the problem is. Just decide if you want to troubleshoot the problem with us offline or with the forum. Regards, shiv
	Appreciate 0 Quote

07-17-2009, 02:04 PM	#4
roozie2001 Just some guy 49 Rep 1,531 Posts Drives: 2008 White 335i sedan Join Date: Apr 2008 Location: Houston, TX iTrader: (4)	its retarded when people get on here and try to put down procede or JB. call the company. both guys are good at troubleshooting. both have good Customer service. Neither want a tarnished reputation. in business thats all you have. __________________ 2008 BMW 335i/Sedan/Alpine White/Terra/Steptronic/Premium Package/Sports package/Comfort Access/USB/Sirius
	Appreciate 0 Quote

07-18-2009, 01:43 PM	#6
creaminz Major General 545 Rep 7,705 Posts Drives: E90 LCI Join Date: Sep 2005 Location: So. Cal iTrader: (33)	Did u check your coolant? It happend to me at least 4 times due to coolant leak. For some reason coolant sputtered all over, check the level and was pretty much empty. I added BMW coolant mixed with water and everything was fine for awhile then engine malfunction happened again when outside temp reached 109 degrees. Not sure it has anything to do with weather but it happens when it's hot.
	Appreciate 0 Quote

07-19-2009, 09:27 AM	#7
clairvoyant Major 79 Rep 1,032 Posts Drives: Bavarian Manure Wagon (BMW) Join Date: Oct 2007 Location: 45°19′20″N, 75°50′0″W iTrader: (5) Garage List 2007 335i [5.24]	DME error code 12543 No coolant leak. Coolant level is normal. I ran the scan, I got DME error code 12543 Exhaust fume turbocharger low side (based on the Excel spreadsheet code list). I ran Map 2 (see attached). Shiv, I need help here. Thank You Attached Images
	Appreciate 0 Quote

07-19-2009, 10:21 AM	#8
kptaylor First Lieutenant 6 Rep 322 Posts Drives: '07 335i Coupe Join Date: Mar 2007 Location: PHX, AZ iTrader: (0)	Unlike the OP, we're not "clairvoyant", so diagnosing codes w/o info is a little difficult... That code suggests a boost leak, so what mods do you have? Do you mean you're running Stage 2 rather than Map 2? That suggests mods, so be a little more clear so people can try to help you out.
	Appreciate 0 Quote