|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Coding RAD2 with MOST?
|
|
04-30-2021, 02:36 PM | #1 |
First Lieutenant
72
Rep 381
Posts |
Coding RAD2 with MOST?
Hi, I was not able to code BMW Professional Radio with regular K+DCAN cable, so I have borrowed this cable from mechanic:
This cable connect to USB port. I have never coded with this. How to setup it? Is it possible to code with it connected to PC directly? |
04-30-2021, 06:38 PM | #2 |
Lieutenant General
1911
Rep 13,104
Posts |
https://www.e90post.com/forums/showthread.php?t=1817964
yes you have to change the interface settings K/D can is not the same as ICOM see above link. Where is the rest of the cable? I don't see how you can code anything without a PC no matter what cable you use. Unless you use one of those canned phone apps which are somewhat limited. |
Appreciate
0
|
05-01-2021, 01:21 AM | #3 |
First Lieutenant
72
Rep 381
Posts |
|
Appreciate
0
|
05-02-2021, 12:16 AM | #4 |
Private First Class
31
Rep 124
Posts |
That device is only needed for flash programming not for coding.
Also it needs to be connected to icom and the icom connects to the pc. |
Appreciate
2
Aus335iguy650.00 Hotter72.00 |
05-02-2021, 11:07 AM | #5 |
Private
2
Rep 67
Posts |
Man don't take this personally but you seem to be way over your head here.
Might be a better idea to stick to the k-dcan cable and just explain what you've done and whats not working |
Appreciate
0
|
05-02-2021, 11:44 AM | #6 |
Lieutenant General
1911
Rep 13,104
Posts |
When you buy and Icom you get the whole kit.
https://www.bimmerforums.com/forum/s...-P-actually-do there is some cable info in the above thread. It does seem that it is required to have an Icom for Most Bus devices after a certain date. Mostly I have seen the Head Units as the choke point. |
Appreciate
0
|
Bookmarks |
|
|