[RiXst3r]

holy crap! NICE! no more pin extracting!

[2007_E93]

Originally Posted by jpsimon

As time goes on there are new features that require different harnesses etc... As the product gets better, upgrades are needed... and paying for them makes sense to me. Buying V2, in my opinion, doesn't = "being an early adopter". You just bought the product that you liked... and now something newer and better is coming. The price for upgrades is completely justifiable

I agree the upgrades and everything costs money and should cost the customer something. But, again...if everything worked fine with V2 from the beginning then I dont think there would even be this discussion. I think most of us would simply think that would go a long way to improving the customer relations that have been "tarnished" over the last few months. In the end I'll probably buy whatever Vishnu has to offer as I am OVERALL happy with the product. Just the constant updates and this map switched to that map and another map and speed limit defeat and no speed limit defeat now....you get my point.

Looking forward to the NEW features and glad they seem to be listening to their customers a bit more. Now that I see this and I'm getting excited about it, I think their time away from the forum was well utilized. They were too married to this forum anyway. Being more like other vendors is probably in everyone's best interest. They should post when they have something finalized like this and not still in developement. That just makes you look unprofessional and ill prepared.

So,..Kudos to Vishnu team for ...well,...HOPEFULLY a well developed product

Just my $.02.

[SLV335I]

Cant wait!!! Anybody want to by a one week old SSTT?

[cn555ic]

Wow thats alot of wires and stuff!!! So let me get this straight, if we have V2, then its some wires added to the procede to become V3, but if you were to buy V3 now it would be a plug and play with subconnectors and everything included?? My Ecu box looks like a tornado went threw it, and I think if i am correct, a couple of more wires is okay, I rather have it this way then to eliminate all the intercept and go to a subconnector connection!

[lawdude]

The PNP harness would take care of a problem that Scalbert and others have had where wires wiggle loose under the electrical tape and cause SES and limp modes. That happened to my friend's V2 today. Long crank time, SES, limp mode. He thought it was the HPFP until he hooked up his code reader and saw a P0335. He popped off the ECU cover, found one loose wire, secured it, buttoned everything back up, cleared the code and was off to the races.

I suspect Shiv better have a bunch of the new harnesses ready to ship.

[AJerman]

Originally Posted by 5soko335i

5 bucks, 5 pages by morning.

How's a couple of hours sound?

I want one of these!!!

[RiXst3r]

Originally Posted by lawdude

The PNP harness would take care of a problem that Scalbert and others have had where wires wiggle loose under the electrical tape and cause SES and limp modes. That happened to my friend's V2 today. Long crank time, SES, limp mode. He thought it was the HPFP until he hooked up his code reader and saw a P0335. He popped off the ECU cover, found one loose wire, secured it, buttoned everything back up, cleared the code and was off to the races.

I suspect Shiv better have a bunch of the new harnesses ready to ship.

+1

loose wire problems are very common... especially directly after installation... it would be great to eliminate them...

[remydlc]

All i say is: I AM 1st on the list lol. Cant wait to have my car back and install this friendly harness in.

1.remydlc
2.
3.
4.
5.

[simplified]

Great job! It's great to finally see a true plug and play harness. I'll be picking up one these shortly!

[lawdude]

BTW, I read that the current data logging (boost) wasn't accurate. Will this new version take care of that?

[PresaMat]

Originally Posted by lawdude

BTW, I read that the current data logging (boost) wasn't accurate. Will this new version take care of that?

Yes the issue has been completely resolved.

[Mr_T]

I doubt I will remove what is already working for me to go to PNP, I will most likely up it to v3 via a few new wires. Nice job by Vishnu for incorporating the PNP design into their product.

[ulises 335i]

I guess its time for me to sell the sstt and become a shivite.

[ulises 335i]

any price change for the v3 retail kit???

Please lower the price to match the competition!

[stressdoc]

Wow, V3 already has the tentative Orb seal of approval! If Eugen and Scalbert give it the thumbs up I've got to have it. PnP with proper connectors is BIG. I don't need most of the flexibility, but the power delivery curve sounds wonderful.

[jpsimon]

I can't wait for more info... dyno's etc. woohoo

[Mr_T]

Originally Posted by ulises 335i

any price change for the v3 retail kit???

Please lower the price to match the competition!

Stand alone...the others may no longer be any form of competition. Time will tell.

As the saying goes "Often imitated, but never duplicated"

[cn555ic]

V3 upgrade for V2 owners should go smoothly I hope, and not like the last catastrophy of waiting over 2 months for a upgrade...I am sure they have learned their lesson and will have more than enough upgrade wires to fulfill the junkies here!!! AWesome can't wait...money in hand already!

[cn555ic]

I bet the "for sale of Procede unit" threads are going to be more and more rare!!

[sflgator]

...and I've been waiting for v2.1; now, that just seems "so last month." Anyway, I've been enjoying my problem-free v2.02 for several months now. So now what do I do...get v2.1 or v3?????

[jpsimon]

I kind of want to sell my V2 unit and buy the full V3 one.. but thats just crazy talk. I'm just going to get the upgrade

Originally Posted by cn555ic

I bet the "for sale of Procede unit" threads are going to be more and more rare!!

[ulises 335i]

The letters are small but it looks like the first pic has some kind of text that I think says : 3 minuet installation , more power. And I can't seem to read the rest.