[mixboser]

Hi J0K3R5,

I also have the "Unknown Terminal Voltage" error whenever running ISTA. May I have the patch, please? Thanks in advance.

Originally Posted by J0K3R5

https://mega.nz/folder/99wA2CCD#MWVv-xJ9e-5kY3nUWdwAbg



Installation instructions:
1. Go to Ediabas folder. For INPA its normaly C:\Ediabas\Bin, for ISTA+ its in Ediabas\Bin folder with ISTA+ directory.
1. If you are using STD:OBD rename existing obd32.dll to obd32.ebas.dll. Users of other cable types rename respective dll (for example STD:CAN users rename can32.dll to can32.ebas.dll).
2. Extract the downloaded file.
3. Copy included obd32.dll to Ediabas\Bin. For other cable types rename it to respective name first (for example can32.dll).
4. For ISTA+ only: copy included NodeISTAVoltageControl.dll to Ediabas\Bin folder within ISTA+ installation.
5. For ISTA+ v4.05 (and above) only:
a) replace existing IstaOperation.exe within ISTA+'s TesterGUI\Bin\Release folder by included one (from respective folder based on ISTA+ version).
b) run included AllowFakeISTAOperation.reg file (choose x86 or x64 depending on your system being 32 or 64 bit respectively).

To manually control the voltage start included NodeEdiabasVoltageControl.exe application. This application can be placed in a different folder if wanted. Voltage can be adjusted by moving sliders or switched off using check boxes. Unchecking check box has the same effect as moving slider to 0V.

UPDATE V2.0:
Version 2.0 of this tool has been released. New features:
1. It now checks the actual interface type setting in ISTA during runtime, so if you switch from Ediabas to ICOM it will stop interfering and resume operation as soon as interface type is set back to Ediabas.
2. It now supports K+DCAN cables which have an ability to detect clamp states (probably most higher quality cables). To use this feature control application should be closed. It will then read actual clamp states and update ISTA voltage states accordingly without any manual actions required. Starting control application will switch the operation to manual control. Closing it will resume automatic recognition.

UPDATE V3.0:
Version 3.0 of this tool has been released. New features:
1. Control application can now be minimized.
2. Support for ISTA+ v4.05 (and hopefully above).

System requirements: Visual Studio 2015 x86 runtime must be installed (same as required for last versions of ISTA+).

P.S. This voltage control utility is not designed to and will not influence voltages reported by ICOM.
P.P.S. This utility works without any issues with original ISTA+, standalone not necessary.

[J0K3R5]

NodeEdiabasVoltageControl V2 + V3 in the ISTA+ folder.

Support for v4.25.40 added.

[MrSweet1991]

@J0k3r5 Hi mate, tried your modified Standard Tools and updated daten to V67 but I'm just wondering, how can I get INPA to show the E90 in English? inpa itself starts off in English but once I select the Engine > DDE module its all German I think lol.

[Moshbmw]

If I downloaded all of the sp daten files, is it fine to update my laptop with all of them or can i only do one?

I have an e90, so i would need e89 files. After updating them can i also update all of the others?

[J0K3R5]

v.4.26.13_PSdZData - Full Version
v.4.26.13_PSdZData - Light Version

added

.

[topproff]

Good afternoon all,

Unfortunately during an ISTA D & DCAN silver cable fault code delete on my 2007 E92 330D, the laptop i use for diagnostics died.

This has now caused all modules in the control unit tree to become red and unresponsive.

The new 21 fault codes all show 'yes' in existent and a milage of -1.

It must be because the laptop switched off during the communication to the ECU.

Has anyone experienced this?

Any help from ISTA gurus would be greatly appretiated.

Many thanks, Matt.

[J0K3R5]

Road Map EUROPE EAST Next 2021-1
Road Map EUROPE WEST Next 2021-1

added
.

[mizta insane]

Originally Posted by topproff

Good afternoon all,

Unfortunately during an ISTA D & DCAN silver cable fault code delete on my 2007 E92 330D, the laptop i use for diagnostics died.

This has now caused all modules in the control unit tree to become red and unresponsive.

The new 21 fault codes all show 'yes' in existent and a milage of -1.

It must be because the laptop switched off during the communication to the ECU.

Has anyone experienced this?

Any help from ISTA gurus would be greatly appretiated.

Many thanks, Matt.

First I’m hearing of this.

Did you try inpa to clear codes?

[topproff]

Yeah,

First thing i did. The faults are hard and will not clear. Feels like the remap has been deleted also. Car is noticeably slower, less torque.

No indications on the dashboard and drives normal apart from what i have described.

Absolutely no idea what to do next

[mizta insane]

Originally Posted by topproff

Yeah,

First thing i did. The faults are hard and will not clear. Feels like the remap has been deleted also. Car is noticeably slower, less torque.

No indications on the dashboard and drives normal apart from what i have described.

Absolutely no idea what to do next

Try disconnecting battery then reconnect and let car sleep for 15-20 min

See what happens then.

What find of errors codes are you getting?

[MrSweet1991]

Originally Posted by topproff

Yeah,

First thing i did. The faults are hard and will not clear. Feels like the remap has been deleted also. Car is noticeably slower, less torque.

No indications on the dashboard and drives normal apart from what i have described.

Absolutely no idea what to do next

Hi mate, be much better to create your own thread as this could go on for a while and J0k3r5 puts a lot of updated info on here. Plus, I don't think there's half as many people on the coding section as there is on the normal UK page

https://www.e90post.com/forums/forumdisplay.php?f=22

[J0K3R5]

BMW TIS offline dvd image
Date: 10.10.2001

added

.

[chemicalx]

wow

[J0K3R5]

[CHAMP2] Road Map Europe MOVE EAST 2020


added
.

[J0K3R5]

ISTA_v4.26.22 - Sedoy Version

added
.

[Wozza77]

Can someone tell me what the "Sedoy" version of ISTA is ?

[J0K3R5]

v.4.26.22_PSdZData_Full

added
.

[J0K3R5]

Originally Posted by Wozza77

Can someone tell me what the "Sedoy" version of ISTA is ?

Sedoy is the the person who makes the self installer for this

[J0K3R5]

Road Map Europe East ROUTE 2021-1
Road Map Europe West ROUTE 2021-1
Gracenote-DB for EVO_11-2020_EU_ENTD_000025D9_003_020_011

added
.

[razzle786]

hi mate can you tell me what version i can use for windows 8.1?

thanks

[Unspec]

4.26.22 Sedoy Version installs ISTA 4.25.40. Intentional?

[razzle786]

yes uk, thanks so 4.26.22 sedoy version?