Retrofit FLA ( High Beam Assist ) -

.:DudoE90:. · 02-05-2017, 05:12 AM

Quote:

Originally Posted by ptpending

ok , so what are first four wires you've connected ? which pins in module and mirror they are connect ?

So as I said, I connected two wires of FLA to FZD to X14286 as described in this thread. Here is photo of FZD for easier understanding http://2.bp.blogspot.com/-B3FFH_Gj-I..._konektori.png
Four wires from mirror I connected to X14288 like on this photo: http://www.e90post.com/forums/attach...1&d=1308780520
I didnt use original retrofit wires in same colors like on , I bought OEM black wires with pins so I will write down where which is connected:
Gray/violet on pin 1 on mirror - missing on mine, not connected
green/white pin 3 - pin 20 on FZD
black/brown pin 4 - pin - 14 on FZD
brown white pin 5 - pin 16 on FZD
brown/black pin 10 - pin 15 on FD

ptpending · 02-05-2017, 05:39 AM

you need to connect 8 pin to fzd for fla and you need to connect pin 1 to fzd if you want that your auto-dim feature deactivated when rear drive engaged

.:DudoE90:. · 02-05-2017, 06:26 AM

Quote:

Originally Posted by ptpending

you need to connect 8 pin to fzd for fla and you need to connect pin 1 to fzd if you want that your auto-dim feature deactivated when rear drive engaged

But on my mirror number 8 pin dont exist, there is empty place. I have only that 4 pins which I connected to FZD already

ptpending · 02-05-2017, 09:09 AM

well i've did such retrofit few months ago and such mirror contain two subsystems, auto-dim and FLA, and they are powered by separate circuits because FLA activated only when ignition signal (30) activated
so check your mirror more carefully or provide it's part number

.:DudoE90:. · 02-05-2017, 12:51 PM

Part number of mirror is: 9225976 and its took off from E90 LCI. That writes on Ebay where I bought it

opjose · 02-05-2017, 03:34 PM

Quote:

Originally Posted by ptpending

and they are powered by separate circuits because FLA activated only when ignition signal (30) activated
so check your mirror more carefully or provide it's part number

Right... and he said

"But on my mirror number 8 pin dont exist, there is empty place."

I wonder if he really means the mirror or the connection to the FZD... if the latter he needs the BMW retrofit wiring harness too so he can wire up the missing connection.

fatjoez · 02-05-2017, 03:38 PM

Quote:

Originally Posted by .:DudoE90:.

Can you please explain what wiring? If I understand correctly, we have only two wires on mirror for FLA to get it working, the can bus wires. So two wires have to comnect to two wires of can bus on FZD, what I did. When I get error first time I switched places of that wires and got same error. How I can try more combinations of connections ifI have only 2 wires and 2 places to connect?

3 Places to connect not 2.
1 on the mirror & 2 places on the ceiling panel module.

So that is creating multiple possibilities.

Unfortunately I didn't record my final wiring or have photos of it.

But I followed the DIY guides which are on this forum & you can refer to my thread bout FLA diy where I linked all the posts & details

Read my thread you will see how much headache I had with this.
I had at least 3 different scenarios of wiring where 1 module would activate, another would disappear.

Also take a photo of your mirror connections & your FZD panel connection & post here

.:DudoE90:. · 02-13-2017, 05:39 AM

I know, its gets me headache also but I dont know what to do...

I have photo of my connector on mirror:

ptpending · 02-14-2017, 09:03 AM

i've checked scheme in rheingold, it seems that you connected correctly
then you need to check everything again

.:DudoE90:. · 02-16-2017, 02:00 AM

Quote:

Originally Posted by ptpending

i've checked scheme in rheingold, it seems that you connected correctly
then you need to check everything again

Im 99,9% sure that wiring is OK, what can be wrong? Coding?
Can you please write steps what to do in coding so I can compare did I missed something.
Also, my car is 2005. and mirror is from LCI. Can there be difference and incompatibility?

ptpending · 02-16-2017, 06:19 AM

can you get same screenshot from inpa modules common job as in post #8 ?

fatjoez · 02-16-2017, 04:29 PM

Quote:

Originally Posted by .:DudoE90:.

Im 99,9% sure that wiring is OK, what can be wrong? Coding?
Can you please write steps what to do in coding so I can compare did I missed something.
Also, my car is 2005. and mirror is from LCI. Can there be difference and incompatibility?

You don't know the wiring is ok until you upload screenshots from INPA showing the modules that are currently detected by your car.

As I said I was 250% sure my wiring was okay until I realised that I could see 3 different scenarios of modules being detected or not detected by my car just by changing wiring.

Check INPA, upload screenshots, then you'll know for sure.

.:DudoE90:. · 02-21-2017, 12:09 AM

Hello,
is this correct screen form INPA?

I tried to switch brown/black and black/brown wire which is possible mistake but didnt work either. Can someone who has FLAplease take a picture or write down wiring from his FZD module to be sure that wiring is 100% right?

fatjoez · 02-21-2017, 03:30 PM

Quote:

Originally Posted by .:DudoE90:.

Hello,
is this correct screen form INPA?

I tried to switch brown/black and black/brown wire which is possible mistake but didnt work either. Can someone who has FLAplease take a picture or write down wiring from his FZD module to be sure that wiring is 100% right?

Hey bro yeah I think that's the right screen (although mine's english)
You don't seem to have many modules... I have like 26 lol

Anyway I can see your FLA isn't on just like we assumed.
Sorry I didn't write wiring plan down but opjose posted his wiring in my thread too so have a look there.

Check out my post in my DIY thread
http://www.e90post.com/forums/showpo...40&postcount=8

Bro by the way just to let you know, when I did my wiring, I did it almost purely based on that video. It was entirely trial and error.

Now that you have the INPA screen on, take screenshots, change your wiring around then come back.
Eventually you will see modules changing in INPA and you will find the right way.
It's trial and error and don't worry if you get Error messages on dashboard along the way

opjose · 02-21-2017, 10:53 PM

Quote:

Originally Posted by .:DudoE90:.

I know, its gets me headache also but I dont know what to do...

I have photo of my connector on mirror:

Is this your old mirror or you new mirror?

I just looked at three mirrors, one with FLA and two others that were replaced by mirrors with FLA.

All had pins in 3,4,5,8,9 & 10.

One also had pins in 1, 6 & 7.

opjose · 02-21-2017, 10:56 PM

Quote:

Originally Posted by .:DudoE90:.

Part number of mirror is: 9225976 and its took off from E90 LCI. That writes on Ebay where I bought it

Please post the original Ebay listing for it.

We've found that often the part number given is not what is stamped on the mirror itself.

.:DudoE90:. · 02-21-2017, 11:59 PM

Quote:

Originally Posted by opjose

Is this your old mirror or you new mirror?

I just looked at three mirrors, one with FLA and two others that were replaced by mirrors with FLA.

All had pins in 3,4,5,8,9 & 10.

One also had pins in 1, 6 & 7.

Its my new mirror. Pins are there depending on functions mirror have, mine has only autodimming and FLA, I dont have homelink, alarm etc. so there are no much wires. Original listing from Ebay is: http://www.ebay.com/itm/122298204019...%3AMEBIDX%3AIT

opjose · 02-22-2017, 11:46 AM

Quote:

Originally Posted by .:DudoE90:.

Its my new mirror. Pins are there depending on functions mirror have, mine has only autodimming and FLA, I dont have homelink, alarm etc. so there are no much wires. Original listing from Ebay is: http://www.ebay.com/itm/122298204019...%3AMEBIDX%3AIT

It never fails

The part number you gave is NOT the part number for the mirror you received.

The mirror you received is 922597601.

I can't even find it on Realoem, so it might not be a standard mirror.

opjose · 02-22-2017, 11:47 AM

Quote:

Originally Posted by .:DudoE90:.

Part number of mirror is: 9225976 and its took off from E90 LCI. That writes on Ebay where I bought it

No it is 922597601

The part number is stamped right on the mirror. That is why I asked to see the ebay listing.

The people who post on ebay often get the part numbers wrong.

ptpending · 02-22-2017, 03:33 PM

correct number for realoem is 9225976 , without 01

fatjoez · 02-22-2017, 08:12 PM

Anyone know if there is any real difference between the Round / Square cameras?

Should we consider newer year model mirrors to have better FLA sensors?

opjose · 02-22-2017, 10:31 PM

Quote:

Originally Posted by ptpending

correct number for realoem is 9225976 , without 01

Well that was dumb of me.

Thanks!

It does appear in Realoem as a EC/FLA only mirror.

02-05-2017, 05:39 AM	#24
ptpending Colonel 456 Rep 2,747 Posts Drives: e91 Join Date: Dec 2013 Location: Poland iTrader: (1)	you need to connect 8 pin to fzd for fla and you need to connect pin 1 to fzd if you want that your auto-dim feature deactivated when rear drive engaged __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

02-05-2017, 09:09 AM	#26
ptpending Colonel 456 Rep 2,747 Posts Drives: e91 Join Date: Dec 2013 Location: Poland iTrader: (1)	well i've did such retrofit few months ago and such mirror contain two subsystems, auto-dim and FLA, and they are powered by separate circuits because FLA activated only when ignition signal (30) activated so check your mirror more carefully or provide it's part number __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

02-05-2017, 12:51 PM	#27
.:DudoE90:. Enlisted Member 3 Rep 31 Posts Drives: BMW E90 320d Join Date: Aug 2014 Location: Zagreb, Croatia iTrader: (0)	Part number of mirror is: 9225976 and its took off from E90 LCI. That writes on Ebay where I bought it
	Appreciate 0 Quote

02-13-2017, 05:39 AM	#30
.:DudoE90:. Enlisted Member 3 Rep 31 Posts Drives: BMW E90 320d Join Date: Aug 2014 Location: Zagreb, Croatia iTrader: (0)	I know, its gets me headache also but I dont know what to do... I have photo of my connector on mirror:
	Appreciate 0 Quote

02-14-2017, 09:03 AM	#31
ptpending Colonel 456 Rep 2,747 Posts Drives: e91 Join Date: Dec 2013 Location: Poland iTrader: (1)	i've checked scheme in rheingold, it seems that you connected correctly then you need to check everything again __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

02-16-2017, 06:19 AM	#33
ptpending Colonel 456 Rep 2,747 Posts Drives: e91 Join Date: Dec 2013 Location: Poland iTrader: (1)	can you get same screenshot from inpa modules common job as in post #8 ? __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

02-21-2017, 12:09 AM	#35
.:DudoE90:. Enlisted Member 3 Rep 31 Posts Drives: BMW E90 320d Join Date: Aug 2014 Location: Zagreb, Croatia iTrader: (0)	Hello, is this correct screen form INPA? I tried to switch brown/black and black/brown wire which is possible mistake but didnt work either. Can someone who has FLAplease take a picture or write down wiring from his FZD module to be sure that wiring is 100% right?
	Appreciate 0 Quote

02-22-2017, 03:33 PM	#42
ptpending Colonel 456 Rep 2,747 Posts Drives: e91 Join Date: Dec 2013 Location: Poland iTrader: (1)	correct number for realoem is 9225976 , without 01 __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

02-22-2017, 08:12 PM	#43
fatjoez student 226 Rep 911 Posts Drives: e90 Join Date: Sep 2009 Location: Bermuda Triangle iTrader: (0)	Anyone know if there is any real difference between the Round / Square cameras? Should we consider newer year model mirrors to have better FLA sensors?
	Appreciate 0 Quote