WTB E92-328i-n52 DSSR

Ughandi · 06-18-2022, 10:30 PM

Howdy!

It's rather difficult to find a DSSR made for my exact engine/chassis configuration (E92-N52). It should have a bend 3/4 the way up the shaft.

If you have one, name your price!!! I would very much like to have one!

AKG brand preferred.

Thanks!

https://www.akgmotorsport.com/produc...2-e93-325-328/

Zajac1 · 06-20-2022, 05:20 AM

Quote:

Originally Posted by Ughandi

Howdy!

It's rather difficult to find a DSSR made for my exact engine/chassis configuration (E92-N52). It should have a bend 3/4 the way up the shaft.

If you have one, name your price!!! I would very much like to have one!

AKG brand preferred.

Thanks!

https://www.akgmotorsport.com/produc...2-e93-325-328/

Hi there, I might get you one. Contact me privately, please.

Peter Morrin · 06-21-2022, 09:26 AM

I have a 2007 e90 xdrive, also with the N52. I am looking at improving the shifting. Are the rods for the E92 the same as for the E90?

Did you consider having one made for you?

Peter

Ughandi · 06-21-2022, 05:42 PM

Quote:

Originally Posted by Zajac1

Hi there, I might get you one. Contact me privately, please.

Hello! My account is too new, so I don't yet have DM privileges . Can you DM me on Instagram @ughandi?

Ughandi · 06-21-2022, 05:45 PM

Quote:

Originally Posted by Peter Morrin

I have a 2007 e90 xdrive, also with the N52. I am looking at improving the shifting. Are the rods for the E92 the same as for the E90?

Did you consider having one made for you?

Peter

They are not the same. Somehow the geometry is different between the transmission, guibo, and shift carrier. UUC had sent me one that was for the e90, and it did not clear the guibo.

Where could I have one made?

Zajac1 · 06-22-2022, 02:33 AM

Quote:

Originally Posted by Ughandi

Hello! My account is too new, so I don't yet have DM privileges . Can you DM me on Instagram @ughandi?

Contact me on my email maydayboy87@gmail.com

Peter Morrin · 06-22-2022, 12:04 PM

The DSSR is not a complicated part, and depending on your skills and tools you could make one yourself, or have a machine shop make one. The challenge would be copying one that has already been made and proven to work. I would be ok DIYing something for myself, but not commercially or for others due to liability concerns.

In my case, I would make it out of carbon fibre over a shaped piece of wood, just because those are the materials I can work with easily. Others will have other options.

Did you return the DSSR for the sedan?

Peter

Ughandi · 07-07-2022, 06:08 AM

I do not have access to machining equipment, and my machining experience starts & ends at trimming bolts to size and using a dremel to widen orifices (such as on the Oil filter housing)

I had returned it.

Seems like everyone is sold out, and AKG has yet to reply to my inquiry.

Ughandi · 07-31-2022, 08:20 AM

bump for eyes-on.

Peter Morrin · 08-07-2022, 05:39 PM

If you have access to the DSSR in your car, you could take a piece of that foam over wire that they use to hold up tomatoe plants in gardens. Bend it exactly to the shape you need for your car and mark the pin/bolt locations. You could then take it to a machine shop who could bend a piece of aluminum rod to that shape and drill two wholes in it for the bolts/pins. Check out the local community college if they have a machinist/welding/metal program.

If you want to DIY, take your foam model, wrap it in fibreglass tape, apply JBweld epoxy, and repeat until you get to about 1/2". Let dry, drill for the bolts/pins and check out your handi-work. Glass and JB-Weld will be less than $30 and you will have a new skill.

Good luck.

Peter Morrin · 08-07-2022, 07:46 PM

If you have access to the DSSR in your car, you could take a piece of that foam over wire that they use to hold up tomatoe plants in gardens. Bend it exactly to the shape you need for your car and mark the pin/bolt locations. You could then take it to a machine shop who could bend a piece of aluminum rod to that shape and drill two wholes in it for the bolts/pins. Check out the local community college if they have a machinist/welding/metal program.

If you want to DIY, take your foam model, wrap it in fibreglass tape, apply JBweld epoxy, and repeat until you get to about 1/2". Let dry, drill for the bolts/pins and check out your handi-work. Glass and JB-Weld will be less than $30 and you will have a new skill.

Good luck.

sirantsE90 · 01-18-2023, 04:33 PM

I have one out of a 335is. Was swapped for uuc many years ago. Dm me

06-18-2022, 10:30 PM	#1
Ughandi New Member 2 Rep 20 Posts Drives: BMW e92 328i 6mt Join Date: Jun 2022 Location: San Diego, CA iTrader: (0)	WTB E92-328i-n52 DSSR Howdy! It's rather difficult to find a DSSR made for my exact engine/chassis configuration (E92-N52). It should have a bend 3/4 the way up the shaft. If you have one, name your price!!! I would very much like to have one! AKG brand preferred. Thanks! https://www.akgmotorsport.com/produc...2-e93-325-328/
	Appreciate 0 Tweet Quote

06-21-2022, 09:26 AM	#3
Peter Morrin Private First Class 46 Rep 154 Posts Drives: 2007 E90(sedan) 328xi Join Date: Dec 2021 Location: Kingston, Ontario, Canada iTrader: (0)	DSSR I have a 2007 e90 xdrive, also with the N52. I am looking at improving the shifting. Are the rods for the E92 the same as for the E90? Did you consider having one made for you? Peter
	Appreciate 0 Quote

06-22-2022, 12:04 PM	#7
Peter Morrin Private First Class 46 Rep 154 Posts Drives: 2007 E90(sedan) 328xi Join Date: Dec 2021 Location: Kingston, Ontario, Canada iTrader: (0)	DSSR Fabrication options The DSSR is not a complicated part, and depending on your skills and tools you could make one yourself, or have a machine shop make one. The challenge would be copying one that has already been made and proven to work. I would be ok DIYing something for myself, but not commercially or for others due to liability concerns. In my case, I would make it out of carbon fibre over a shaped piece of wood, just because those are the materials I can work with easily. Others will have other options. Did you return the DSSR for the sedan? Peter
	Appreciate 0 Quote

07-07-2022, 06:08 AM	#8
Ughandi New Member 2 Rep 20 Posts Drives: BMW e92 328i 6mt Join Date: Jun 2022 Location: San Diego, CA iTrader: (0)	I do not have access to machining equipment, and my machining experience starts & ends at trimming bolts to size and using a dremel to widen orifices (such as on the Oil filter housing) I had returned it. Seems like everyone is sold out, and AKG has yet to reply to my inquiry.
	Appreciate 0 Quote

07-31-2022, 08:20 AM	#9
Ughandi New Member 2 Rep 20 Posts Drives: BMW e92 328i 6mt Join Date: Jun 2022 Location: San Diego, CA iTrader: (0)	bump for eyes-on.
	Appreciate 0 Quote

08-07-2022, 05:39 PM	#10
Peter Morrin Private First Class 46 Rep 154 Posts Drives: 2007 E90(sedan) 328xi Join Date: Dec 2021 Location: Kingston, Ontario, Canada iTrader: (0)	DSSR If you have access to the DSSR in your car, you could take a piece of that foam over wire that they use to hold up tomatoe plants in gardens. Bend it exactly to the shape you need for your car and mark the pin/bolt locations. You could then take it to a machine shop who could bend a piece of aluminum rod to that shape and drill two wholes in it for the bolts/pins. Check out the local community college if they have a machinist/welding/metal program. If you want to DIY, take your foam model, wrap it in fibreglass tape, apply JBweld epoxy, and repeat until you get to about 1/2". Let dry, drill for the bolts/pins and check out your handi-work. Glass and JB-Weld will be less than $30 and you will have a new skill. Good luck.
	Appreciate 0 Quote

08-07-2022, 07:46 PM	#11
Peter Morrin Private First Class 46 Rep 154 Posts Drives: 2007 E90(sedan) 328xi Join Date: Dec 2021 Location: Kingston, Ontario, Canada iTrader: (0)	DSSR If you have access to the DSSR in your car, you could take a piece of that foam over wire that they use to hold up tomatoe plants in gardens. Bend it exactly to the shape you need for your car and mark the pin/bolt locations. You could then take it to a machine shop who could bend a piece of aluminum rod to that shape and drill two wholes in it for the bolts/pins. Check out the local community college if they have a machinist/welding/metal program. If you want to DIY, take your foam model, wrap it in fibreglass tape, apply JBweld epoxy, and repeat until you get to about 1/2". Let dry, drill for the bolts/pins and check out your handi-work. Glass and JB-Weld will be less than $30 and you will have a new skill. Good luck.
	Appreciate 0 Quote

01-18-2023, 04:33 PM	#12
sirantsE90 Colonel 149 Rep 2,120 Posts Drives: N51 E90 Join Date: Oct 2008 Location: Lake Grove iTrader: (18) Garage List 2008 328i [0.00]	I have one out of a 335is. Was swapped for uuc many years ago. Dm me __________________ BMW CCA # 473001
	Appreciate 0 Quote