[dirtmaster666]

hey folks here is a log with the procede i took today. what you think?

these are stage 3 4-23 aggressive

input is much appreciated

thanks

[rader1]

Looks good

[dirtmaster666]

Originally Posted by rader1

Looks good

That's kind of what I thought but wasn't sure. I also see my fuel trim seem to sit at 34 percent. Is that bad. If so is there a way to adjust that. Sorry I new to tuning

[rader1]

34% is maxxed out. Try to increase you OL fueling a bit. Im not really familiar with the the PROcede, but IIRC you want the trims to be roughly 15. Everything else looks good.

[805beemer]

Originally Posted by rader1

34% is maxxed out. Try to increase you OL fueling a bit. Im not really familiar with the the PROcede, but IIRC you want the trims to be roughly 15. Everything else looks good.

Other than the fact that his AFR is 16.71:1 while running 17lbs of boost. He needs to rescale it so we can see what it is for the entire pull.

[rader1]

I saw that, but the graph looked goofy and I don't know if that's accurate. Of coarse, with his trims maxxed out it might be.

[dirtmaster666]

I think my open loop is at 75. So going up to say 85 should help my fuel?

[rader1]

w

Originally Posted by dirtmaster666

I think my open loop is at 75. So going up to say 85 should help my fuel?

Try that, however I've seen several people get timing drops when OL fueling is increased

[dirtmaster666]

Originally Posted by rader1

w

Try that, however I've seen several people get timing drops when OL fueling is increased

I log and see what happens

[plague]

as far as i remember OL fueling was set at 90 standard. I adjusted mine to 100% to correct trims on my logs. worked for me idk.

[dirtmaster666]

Originally Posted by plague

as far as i remember OL fueling was set at 90 standard. I adjusted mine to 100% to correct trims on my logs. worked for me idk.

The new maps were default to 75.