[KaffineKiller]

Hopefully someone can help me out with this. I have done quite alot of research without much luck unfortunately. I have an iPhone 5 that I will be mounting to my dash this week and I want to hardwire my charger. My question is what's my best option. I do not have a charging port in or under my glove compartment and my center console and front ash tray plugs are already in use. I do not have the flashlight charging port either so that adaptor for another charging port won't work. What's my best route from the center of my dash for the charger? I am not buying a Kuda mount as I do not like how they look. Any help would be greatly appreciated. Thanks

[KaffineKiller]

Anyone?

[Cheesegeezer]

The only way I can think of, is buying another usb cigarette charger and strip out the insides to expose the 12v positive wire and the ground wire(keep all of the electronics in there as u will need them, you can box them and tape them up and hide behind ashtray or wherever u like). Take these wires from existing cigarette feed but split them to feed both cigarette lighter and your new charger cable. This will keep them on the same fuse(your phone will draw very little current anyway). Use a usb to lightning cable and feed this through to expose only the lightning end to where you are installing your phone.

Keeps it clean.

Alternatively by a 4 cigarette adapter and screw it into the carpet to hold it in place(in a footwell out of the way) and run your necessary cables behind the cockpit trim.

[techwhiz]

This
http://www.amazon.com/gp/product/B00...ls_o03_s00_i00
and
http://store.apple.com/us/product/MD...ro-usb-adapter

[Neothin87]

Get an add a fuse and stick it in slot 5 I think it is in the fuse box