Official North Texas Area Chat Thread (#2)

dsb335 · 10-08-2015, 08:38 AM

Quote:

Originally Posted by Chantz335i

Anyone other than Sammy doing walnut blasting in the DFW area??

Ultimate Bimmer Service does walnut blasting. It'll cost a bit more than having Sammy do it.

Chantz335i · 10-09-2015, 03:53 PM

Quote:

Originally Posted by dsb335

Ultimate Bimmer Service does walnut blasting. It'll cost a bit more than having Sammy do it.

Any estimate of what they are charging?

Spy vs Spy · 10-10-2015, 04:35 PM

Quote:

Originally Posted by Chantz335i

Anyone other than Sammy doing walnut blasting in the DFW area??

Check with Eurauto Shop in Plano. For a 335i, I think it's around ~$300. Maybe $250... They did one of my 335ds (which is a completely different deal, despite the similarity in the engines). She runs a lot better now.

MadeInPhilly · 10-14-2015, 12:33 PM

Quote:

Originally Posted by Chantz335i

Any estimate of what they are charging?

Sammy is always busy. I've had a tough time getting ahold of him lately. The dude always has like 6-7 335i at the shop.

Anyone try Bimmer Motor Werks? I called the guy recently. He used to be a tech at BMW Dallas. Gave me some low prices for work.

http://www.bimmermotorwerks.net/

Chantz335i · 10-15-2015, 12:23 PM

Quote:

Originally Posted by MadeInPhilly

Sammy is always busy. I've had a tough time getting ahold of him lately. The dude always has like 6-7 335i at the shop.

Anyone try Bimmer Motor Werks? I called the guy recently. He used to be a tech at BMW Dallas. Gave me some low prices for work.

http://www.bimmermotorwerks.net/

I was actually able to get ahold of Sammy yesterday and was planning on scheduling my walnut blast for later next week. I ended up changing out my plugs yesterday and haven't gotten any misfires (reason for contacting him) so I'm going to hold off for now. Try contacting him again I think he may be available

Bent_remy · 10-16-2015, 05:33 PM

Quote:

Originally Posted by Chantz335i

Any estimate of what they are charging?

Five and change.

Bent_remy · 11-19-2015, 01:22 PM

Somebody PM me Sammys contact info. Thanks.

TrollToll · 12-10-2015, 04:31 PM

Is anyone in the e90 post dfw facebook group?

barrettgpeck · 12-23-2015, 10:54 AM

Anyone here in the DFW successfully flashed an 07 car with MHD? I keep getting errors, and wanted to see if my cable was possibly bad.

BlackBB6 · 12-23-2015, 08:36 PM

Quote:

Originally Posted by barrettgpeck

Anyone here in the DFW successfully flashed an 07 car with MHD? I keep getting errors, and wanted to see if my cable was possibly bad.

Not an 07, but PM me if you want to try my cable.

stilov · 12-23-2015, 09:16 PM

My 07 worked fine. But I just did the back end flash stuff.

barrettgpeck · 01-05-2016, 08:09 PM

Got it sorted, it was battery charger issue. This thing flies like a raped ape on the freeway.

Medicalli · 01-07-2016, 03:40 PM

Anyone have any suggestions on who to go to for fending pulling and possibly cutting? Looking in the Plano/Carrollton/Dallas area.

Ranger Hoopy · 01-09-2016, 09:17 AM

INTRODUCTION (and questions)

Howdy NTX, Hoopy here from East Dallas. I've never been much of a "car guy," but I've been a bimmer fan for about twenty-five years, and I've had two different 3-series during that time. While the bigger models have not been in my budget up until now, the 3 (and the 2002) have always been my favorites anyway.

I've been following e90post for a couple of years, but my inexperience under the hood, busy travel schedule, and becoming a first-time parent to twin boys have severely restricted my ability to dig deep enough to follow most of the discussion threads!

Well, over the summer, I finally gave up on the travel job that was trying to kill me, and since then I've been lurking a bit more and more, trying to get a grip on some of the basic concepts of what keeps these machines going. Giving full financial freedom to my local service center is not an option!

I have an unmodified 2006 330xi, and I would like to keep it running and clean for at least another ten years, if not longer. (My boys, Elvis and Danger, will be eligible for driving licenses in thirteen years). I imagine that over time certain things like iDrive and navigation may become unrealistic to maintain, but those are kind of a nuisance already!

This winter I got my nails greasy and my knuckles bloody for the first time under the hood, when I started getting misfires and learned about things like coil packs and spark plugs. I'm only scratching the surface, but it sure feels satisfying to stare the dragon down the throat and charge ahead, armed with a shiny steel ratchet set.

I am really interested in getting more hands on experience with both my own car and other BMWs, so that I can take better care, and spend less money, on the car I love.

So I ask of you, the community, who wants to help me help them help me? Anybody on my side of the metroplex that will let me pass them a wrench and a beer while doing maintenance?

Anyone with the tools and the understanding who can help me with some basic recoding?

When I get stuck and need to escalate to an experienced professional, is there someone/some place that would be understanding of my needs and desire to limit expenses and talk me through needed service rather than just run up my credit card?

Also, I'm building up an impressive collection of archeological samples in the form of 10-year old broken plastic tabs from interior trim pieces and elsewhere. The cover for the OBD2 port doesn't want to stay on, the plastic trim around the sun visor vanity mirror is rattling like a sumbitch, and while I managed to successfully disassemble everything twice, I broke the tabs off the cabin-filter cover when I was cleaning it! Is there a good local junkyard-type resource where I can hunt for replacement parts instead of paying full boat for new replacements from Bavaria?

Anyway, thanks again for all those who contribute to this group, and I really hope to meet up with some of you soon in person.

Bent_remy · 01-27-2016, 02:52 PM

Where did you guys have your FMIC and DP's installed in DFW? (If you guys DIY'ed lemme know too).
Hopefully looking to get this done in the next few weeks. Since we get a new post here about twice a month hopefully I'll get a response by then.

e92days · 03-04-2016, 07:51 PM

If anyone happens to be in Oklahoma looking for a walnut blast I know a guy in the Edmond area. He did mine for $300 and had me in a week after I called him. He also provided the replacement gaskets. You can PM me for his information! Bye!

Hellrot Sachin · 03-05-2016, 06:22 AM

Call Sammie, he'll take care of you.

Quote:

Originally Posted by Bent_remy

Where did you guys have your FMIC and DP's installed in DFW? (If you guys DIY'ed lemme know too).
Hopefully looking to get this done in the next few weeks. Since we get a new post here about twice a month hopefully I'll get a response by then.

BlackBB6 · 03-06-2016, 08:47 AM

Sammy can be very busy at times, join NTBC on facebook we have a few guys who can do shell blasting and other services for great prices.

Bent_remy · 03-09-2016, 05:01 AM

Quote:

Originally Posted by BlackBB6

Sammy can be very busy at times, join NTBC on facebook we have a few guys who can do shell blasting and other services for great prices.

Thanks, was searching on FB but there are a lot of groups with that acronym. Pm me with specifics.

e92days · 03-13-2016, 09:47 PM

Quote:

Originally Posted by Bent_remy

Thanks, was searching on FB but there are a lot of groups with that acronym. Pm me with specifics.

North Texas Bimmer Crew?

Bent_remy · 03-13-2016, 10:35 PM

Quote:

Originally Posted by e92days

North Texas Bimmer Crew?

Guess I shouldn't have joined the Nha Trang Betta Club huh?

e92days · 03-14-2016, 12:05 PM

Quote:

Originally Posted by Bent_remy

Guess I shouldn't have joined the Nha Trang Betta Club huh?

Yeah, that was wrong. Notoriously Tantalizing Butt Crack. I don't know if it's a crew, that's just what the acronym stands for

11-19-2015, 01:22 PM	#3263
Bent_remy Enemy of viscosity and thermal breakdown 138 Rep 278 Posts Drives: N54 E93 6MT Join Date: Oct 2014 Location: North Texas iTrader: (1)	Somebody PM me Sammys contact info. Thanks. __________________ 02' E46 S54 M3 6MT OEM+, Apex FL-5, RIP 09' E93 N54 6MT, Smarttop, Lux V5, JB4 G5 ISO, BMS DCI, Black ER CP, Tial BOV
	Appreciate 0 Quote

12-10-2015, 04:31 PM	#3264
TrollToll Banned 654 Rep 946 Posts Drives: 535i Join Date: Sep 2015 Location: Texas iTrader: (0)	Is anyone in the e90 post dfw facebook group?
	Appreciate 0 Quote

12-23-2015, 10:54 AM	#3265
barrettgpeck New Member 0 Rep 17 Posts Drives: 2007 335i 6MT Join Date: Nov 2014 Location: United States iTrader: (0)	Anyone here in the DFW successfully flashed an 07 car with MHD? I keep getting errors, and wanted to see if my cable was possibly bad.
	Appreciate 0 Quote

12-23-2015, 09:16 PM	#3267
stilov Lieutenant 19 Rep 569 Posts Drives: various Join Date: Mar 2009 Location: McKinney, TX iTrader: (3)	My 07 worked fine. But I just did the back end flash stuff.
	Appreciate 0 Quote

01-05-2016, 08:09 PM	#3268
barrettgpeck New Member 0 Rep 17 Posts Drives: 2007 335i 6MT Join Date: Nov 2014 Location: United States iTrader: (0)	Got it sorted, it was battery charger issue. This thing flies like a raped ape on the freeway.
	Appreciate 0 Quote

01-07-2016, 03:40 PM	#3269
Medicalli Enlisted Member 5 Rep 47 Posts Drives: e92 Join Date: May 2013 Location: DFW, TX iTrader: (2)	Anyone have any suggestions on who to go to for fending pulling and possibly cutting? Looking in the Plano/Carrollton/Dallas area. __________________ 07 BSM e92 \| iDrive \| CA \| Premium \| Sport \| Cold Weather \| Lux v3 \| Black Kidney Grills \| ECS Carbon Fiber Aero Lip \| Body Colored Reflectors \| Ziza Smoked Turn Signals \| BMS Dual Cone Intakes \| Forgestar F14 Piano Black 19x8.5 +32f 19x10 +26r \| Front Slotted Rotors \| Carbon Fiber High Kick Spoiler
	Appreciate 0 Quote

01-09-2016, 09:17 AM	#3270
Ranger Hoopy New Member 0 Rep 5 Posts Drives: 2006 330xi Join Date: Nov 2014 Location: Dallas, TX iTrader: (0)	INTRODUCTION (and questions) Howdy NTX, Hoopy here from East Dallas. I've never been much of a "car guy," but I've been a bimmer fan for about twenty-five years, and I've had two different 3-series during that time. While the bigger models have not been in my budget up until now, the 3 (and the 2002) have always been my favorites anyway. I've been following e90post for a couple of years, but my inexperience under the hood, busy travel schedule, and becoming a first-time parent to twin boys have severely restricted my ability to dig deep enough to follow most of the discussion threads! Well, over the summer, I finally gave up on the travel job that was trying to kill me, and since then I've been lurking a bit more and more, trying to get a grip on some of the basic concepts of what keeps these machines going. Giving full financial freedom to my local service center is not an option! I have an unmodified 2006 330xi, and I would like to keep it running and clean for at least another ten years, if not longer. (My boys, Elvis and Danger, will be eligible for driving licenses in thirteen years). I imagine that over time certain things like iDrive and navigation may become unrealistic to maintain, but those are kind of a nuisance already! This winter I got my nails greasy and my knuckles bloody for the first time under the hood, when I started getting misfires and learned about things like coil packs and spark plugs. I'm only scratching the surface, but it sure feels satisfying to stare the dragon down the throat and charge ahead, armed with a shiny steel ratchet set. I am really interested in getting more hands on experience with both my own car and other BMWs, so that I can take better care, and spend less money, on the car I love. So I ask of you, the community, who wants to help me help them help me? Anybody on my side of the metroplex that will let me pass them a wrench and a beer while doing maintenance? Anyone with the tools and the understanding who can help me with some basic recoding? When I get stuck and need to escalate to an experienced professional, is there someone/some place that would be understanding of my needs and desire to limit expenses and talk me through needed service rather than just run up my credit card? Also, I'm building up an impressive collection of archeological samples in the form of 10-year old broken plastic tabs from interior trim pieces and elsewhere. The cover for the OBD2 port doesn't want to stay on, the plastic trim around the sun visor vanity mirror is rattling like a sumbitch, and while I managed to successfully disassemble everything twice, I broke the tabs off the cabin-filter cover when I was cleaning it! Is there a good local junkyard-type resource where I can hunt for replacement parts instead of paying full boat for new replacements from Bavaria? Anyway, thanks again for all those who contribute to this group, and I really hope to meet up with some of you soon in person.
	Appreciate 0 Quote

01-27-2016, 02:52 PM	#3271
Bent_remy Enemy of viscosity and thermal breakdown 138 Rep 278 Posts Drives: N54 E93 6MT Join Date: Oct 2014 Location: North Texas iTrader: (1)	Where did you guys have your FMIC and DP's installed in DFW? (If you guys DIY'ed lemme know too). Hopefully looking to get this done in the next few weeks. Since we get a new post here about twice a month hopefully I'll get a response by then. __________________ 02' E46 S54 M3 6MT OEM+, Apex FL-5, RIP 09' E93 N54 6MT, Smarttop, Lux V5, JB4 G5 ISO, BMS DCI, Black ER CP, Tial BOV
	Appreciate 0 Quote

03-04-2016, 07:51 PM	#3272
e92days Banned 10 Rep 123 Posts Drives: E92 335i Join Date: Oct 2015 Location: Oklahoma iTrader: (2)	If anyone happens to be in Oklahoma looking for a walnut blast I know a guy in the Edmond area. He did mine for $300 and had me in a week after I called him. He also provided the replacement gaskets. You can PM me for his information! Bye! Last edited by e92days; 03-04-2016 at 07:56 PM..
	Appreciate 0 Quote

03-06-2016, 08:47 AM	#3274
BlackBB6 Lieutenant 65 Rep 554 Posts Drives: E92 335i 6MT Join Date: Oct 2011 Location: Dallas iTrader: (2) Garage List 2008 BMW E92 335i [8.00]	Sammy can be very busy at times, join NTBC on facebook we have a few guys who can do shell blasting and other services for great prices.
	Appreciate 0 Quote