E90Post
 


 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > Europe (Continental) > e91 LCI N43b20, "misfire"



Reply
 
Thread Tools Search this Thread
      08-10-2024, 12:29 PM   #1
metspo
Registered
0
Rep
3
Posts

Drives: Bmw E91
Join Date: Mar 2024
Location: Finland

iTrader: (0)

e91 LCI N43b20, "misfire"

Heya again! My car just came from a mechanic, all injectors replaced, coded, new spark plugs, coils, timing chain was fine, new cylinder head cover. Hooked up inpa and started driving while watching the operation mode switching homogenous, homogenous-lean and stratisified mode, when my car is switching from those operations it feels like a "misfire". had 30EA code, did the nox desulfasation but the "misfire" still appears. Any ideas ?

No codes present.
Appreciate 0
      09-12-2024, 12:10 PM   #2
dreadedN43
Registered
0
Rep
2
Posts

Drives: 320i E91
Join Date: Sep 2024
Location: EU

iTrader: (0)

Hi, same car, same engine, also nox issues, also planning on replacing spark plugs myself.
What kind of spark plugs did you put in? I found this blog that insists that only a certain kind of spark plug is to be used https://bimmerprofs.com/spark-plugs-...series-engines
Appreciate 0
      09-13-2024, 01:53 AM   #3
m_star01
Private First Class
13
Rep
103
Posts

Drives: 2010 320i m sport business ed.
Join Date: Dec 2014
Location: LONDON

iTrader: (0)

The 30EA is unlikely cause your misfire. That's telling you your catalytic converter is sulphurized and basically what I do is take for long drive build exhaust temp and drive 72mph+ for 30mins or so. Seems to do the trick only if you don't have other codes logged and interfering. You also need half tank of fuel.

Did you use index 11 injectors? And ngk plugs as above post? These engines are very very fussy and sensitive.
Appreciate 0
      09-16-2024, 01:29 PM   #4
metspo
Registered
0
Rep
3
Posts

Drives: Bmw E91
Join Date: Mar 2024
Location: Finland

iTrader: (0)

NGK ZKBR7A-HTU plugs, installed noxem, operation modes now working as intended, changed maf, cleaned vanos and sensors, now getting jerking under 30mph, full throttle fine, only when lighly applying gas it jerks. on cold stasts still getting really rough idle for about 30seconds, also operational smoothing values goes -300 (-200/+200) are limits.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:06 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST