[Digitalinkartist]

Originally Posted by ggodjjdogg

Thanks for saving my me. I owe you a beer. I tore the dash down and put a new motor in only to have it not work. I then re read your post. Tested the wires and found that the recall “fix” had failed. The ground had continuity after the fix but not in the middle of the connector or at the plug. I love this! And my car. Thank you.

I can also confirm that my BMW recall patch also failed.
Replaced battery
Checked Fuses
Replaced Blower motor
Replaced FSR (Final stage resistor)
Still nothing.....
Checked voltage output on patch cable.... no power.
Replaced the blower motor patch cable and the system is once again running perfectly.

Patch kit I used: Here