[JM85]

Looking for set of 10mm spacers with correct bolts, 10mm seems to be a odd size

[lemans 330d]

i just bought some hubcentric ones but they are expensive.
i paid around £50 with bolts.

do a search on google and it will bring up ebay links as appose to searching on ebay

[Shorty1608]

Originally Posted by JM85

Looking for set of 10mm spacers with correct bolts, 10mm seems to be a odd size

Don't hold me to this, but if I remember rightly 10mm is odd as the lip on the hub is 10mm so when you put a spacer on it takes up that lip and there isn't enough room for another lip to sit the alloy on I'm sure people said 12 was as low as you could go hubcentric.

[JM85]

I've seen some on eBay but they are 80+ with no bolts

[Shorty1608]

Originally Posted by JM85

I've seen some on eBay but they are 80+ with no bolts

That is quite dear that, I got my 15's for £45 including longer bolts, I just need to get some longer lockers then I'm done

[lemans 330d]

Originally Posted by Shorty1608

That is quite dear that, I got my 15's for £45 including longer bolts, I just need to get some longer lockers then I'm done

15,s are a lot cheaper than 10,s

[lemans 330d]

http://www.ebay.co.uk/itm/10mm-BMW-W...-/181919946095?


Ebay item number of the ones I bought.
Have used these before and good quality

[JM85]

Originally Posted by lemans 330d

http://www.ebay.co.uk/itm/10mm-BMW-W...-/181919946095?


Ebay item number of the ones I bought.
Have used these before and good quality

Where these for a LCI with MV3's by any chance?

[lemans 330d]

Originally Posted by JM85

Where these for a LCI with MV3's by any chance?

Pre Lci with mv3 and also used with 313

[holmefield]

Originally Posted by lemans 330d

http://www.ebay.co.uk/itm/10mm-BMW-W...-/181919946095?


Ebay item number of the ones I bought.
Have used these before and good quality

Yep I've just put a set of these 10mm ones on the back of my car...

I'm an aircraft engineer by trade have been for 25 years, and these are very well made spacers. The alloy is good quality and the hole fell of the space feels good...

10mm hub-centric spacers are harder to make as you have to add chamfers to the outside of the spacer hub part, the 72.6mm part to get the required depth over your existing hub...