DMTL 2A12, 2A13, 2A18 Help!

Fb2017 · 08-10-2018, 07:44 AM

Hello everyone. I have been looking around for the best way to rid the car of the above codes. A few forums have mentioned the wiring harness being damaged and a few others me tion that the pump needs to be replaced. Since the placement of this pump varies, I wonder if the wiring can be faulty/damaged on the 328i cars since they have the pump relocated to the rear passenger side.

Hoping for a quick fix but will order a pump if needed.

Codes pulled are the following..
2A12,2,DMTL solenoid valve, activation
2A13,2,DMTL leak diagnosis pump, activation
2A18,4,DMTL, heater: activation

Considering the codes are for the pump heater and pump activation/functioning. I would assume its a wiring issue.. all help is welcome

Car is a 2009 bmw 328xi

GEOS07335i · 08-17-2018, 10:28 AM

I had similar codes on my E93 335. I replaced the pump and that got rid of my DTML codes. Just did this two weeks ago. Got my OEM pump from FCP Euro (Bosch) Mine was located driver side rear under the fenderwell. It was a pretty easy DIY. Lots of youtube vid's should take about an hour or two to fix. 8mm and 10mm I believe like total of 8 or 9 small bolts.

Fb2017 · 08-17-2018, 10:33 AM

Do you remember specifically which codes you had?

08-10-2018, 07:44 AM	#1
Fb2017 First Lieutenant 40 Rep 345 Posts Drives: bicycle Join Date: Nov 2014 Location: Canada iTrader: (2)	DMTL 2A12, 2A13, 2A18 Help! Hello everyone. I have been looking around for the best way to rid the car of the above codes. A few forums have mentioned the wiring harness being damaged and a few others me tion that the pump needs to be replaced. Since the placement of this pump varies, I wonder if the wiring can be faulty/damaged on the 328i cars since they have the pump relocated to the rear passenger side. Hoping for a quick fix but will order a pump if needed. Codes pulled are the following.. 2A12,2,DMTL solenoid valve, activation 2A13,2,DMTL leak diagnosis pump, activation 2A18,4,DMTL, heater: activation Considering the codes are for the pump heater and pump activation/functioning. I would assume its a wiring issue.. all help is welcome Car is a 2009 bmw 328xi
	Appreciate 0 Tweet Quote

08-17-2018, 10:28 AM	#2
GEOS07335i Lieutenant 162 Rep 513 Posts Drives: 08 335i Join Date: Apr 2017 Location: Atlanta iTrader: (0) Garage List 2007 BMW 335i E93 [10.00]	I had similar codes on my E93 335. I replaced the pump and that got rid of my DTML codes. Just did this two weeks ago. Got my OEM pump from FCP Euro (Bosch) Mine was located driver side rear under the fenderwell. It was a pretty easy DIY. Lots of youtube vid's should take about an hour or two to fix. 8mm and 10mm I believe like total of 8 or 9 small bolts. __________________ 2008 335i E93, DP's, 7" FMIC, DCI,CP TIAL Q BOV, MHD Stage 2+, Alpina Flash
	Appreciate 0 Quote

08-17-2018, 10:33 AM	#3
Fb2017 First Lieutenant 40 Rep 345 Posts Drives: bicycle Join Date: Nov 2014 Location: Canada iTrader: (2)	Do you remember specifically which codes you had?
	Appreciate 0 Quote