Kombi question (changed low to high kombi)

Dtype · 02-14-2016, 09:12 AM

Hello.
Yesterday I've changed the kombi on mine E91 320d.
Changed from low to high cluster. Installed a cluster from a 335d. My car is from 12/2006 and the cluster I installed was from 06/2007.
I've opened it and changed eeprom, write my vin, my mileage, coded it and everithing work fine except one thing, that ring around tachometer (RPM) that moves the redline if engine is cold or warm.
The ring of the speedo, for cruise control works fine. For the redline it never moves.
It's about coding? My cluster is just like this and what I'm talking about is just like this too.

Thanks in advance

Len_Beach · 02-14-2016, 09:26 AM

I don't believe they move. That only happens on the M3.

I dismantled a spare Kombi to replicate and M3 speed and that outer ring just clipped in.

Dtype · 02-14-2016, 10:06 AM

But they do. Not only the M3.
Have a friend with a e93 330d and it moves backwards when engine it's cold and then moves more next to 5000rpm when it gets warm. Don't know if this will move, that's why I'm asking if it's about coding. Maybe not all cluster moves like you have check on yours. Can some one with a cluster that the ring works, send me trc file?

Sensible_ · 02-14-2016, 10:21 AM

The feature you refer to was cancelled on e90. I'd bet if you took the cluster apart it will be without the motor on the rev side compared to the cruise ring...

I guess M3 cluster has it, maybe also Alpina?

Read here for info:

http://www.e90post.com/forums/showthread.php?t=43606

Dtype · 02-14-2016, 10:30 AM

Quote:

Originally Posted by Sensible_

The feature you refer to was cancelled on e90. I'd bet if you took the cluster apart it will be without the motor on the rev side compared to the cruise ring...

I guess M3 cluster has it, maybe also Alpina?

Read here for info:

http://www.e90post.com/forums/showthread.php?t=43606

It was canceled after some date? I've seen some clusters moving... Even here in diy section it's a guy who made the same as me, on a 320d just like mine and on that it moves. This cluster is from 06/2007.

Sensible_ · 02-14-2016, 10:33 AM

You have a link? I personally have never seen an e90 (not m3) rev marker move before. I'm not doubting you but I'd be interested to see it.

If indeed the motor is present, you need to check this, then perhaps it was possible with some early KOMBI / DDE firmware (datens), I don't know though...

Dtype · 02-14-2016, 11:02 AM

Check here:
http://www.e90post.com/forums/showth...hlight=cluster

Sensible_ · 02-14-2016, 02:52 PM

Quote:

Originally Posted by Dtype

Check here:
http://www.e90post.com/forums/showth...hlight=cluster

What am I to look at specifically? I don't see anything relating to this issue at first glance?

Dtype · 02-14-2016, 04:35 PM

Check that redline is different between some of the photos.

Dtype · 02-15-2016, 11:00 AM

So it seems I was make a little bit confusion. My friends car is a 535d not a 335d. It was my mistake.
Thanks to all anyway

Kompany · 01-22-2020, 08:16 AM

Quote:

Originally Posted by Dtype

Hello.
Yesterday I've changed the kombi on mine E91 320d.
Changed from low to high cluster. Installed a cluster from a 335d. My car is from 12/2006 and the cluster I installed was from 06/2007.
I've opened it and changed eeprom, write my vin, my mileage, coded it and everithing work fine except one thing, that ring around tachometer (RPM) that moves the redline if engine is cold or warm.
The ring of the speedo, for cruise control works fine. For the redline it never moves.
It's about coding? My cluster is just like this and what I'm talking about is just like this too.

Thanks in advance

Hello. Can you help me what did you coded to work the ring of the speedo, for cruise control? I have an e91 lci 20d. Idid the same, but for me didnt work the tacho ring, when the cruise control is on.

Thank you.

D0WN3D · 01-04-2021, 02:48 PM

Quote:

Originally Posted by Kompany

Hello. Can you help me what did you coded to work the ring of the speedo, for cruise control? I have an e91 lci 20d. Idid the same, but for me didnt work the tacho ring, when the cruise control is on.

Thank you.

I have the same issue. Installed a LCI instrument cluster on my PRE-LCI 2005 E90 and the ring of the speedo for Cruise Control doesn't work for me. Neither does the ring of the RPMs, it's just stuck.

Aus335iguy · 01-05-2021, 04:27 AM

@LMB335IS would know exactly

02-14-2016, 09:12 AM	#1
Dtype First Lieutenant 36 Rep 398 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	Kombi question (changed low to high kombi) Hello. Yesterday I've changed the kombi on mine E91 320d. Changed from low to high cluster. Installed a cluster from a 335d. My car is from 12/2006 and the cluster I installed was from 06/2007. I've opened it and changed eeprom, write my vin, my mileage, coded it and everithing work fine except one thing, that ring around tachometer (RPM) that moves the redline if engine is cold or warm. The ring of the speedo, for cruise control works fine. For the redline it never moves. It's about coding? My cluster is just like this and what I'm talking about is just like this too. Thanks in advance
	Appreciate 0 Tweet Quote

02-14-2016, 09:26 AM	#2
Len_Beach Major 186 Rep 1,247 Posts Drives: 435d Join Date: Jun 2011 Location: UK iTrader: (1)	I don't believe they move. That only happens on the M3. I dismantled a spare Kombi to replicate and M3 speed and that outer ring just clipped in.
	Appreciate 0 Quote

02-14-2016, 10:06 AM	#3
Dtype First Lieutenant 36 Rep 398 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	But they do. Not only the M3. Have a friend with a e93 330d and it moves backwards when engine it's cold and then moves more next to 5000rpm when it gets warm. Don't know if this will move, that's why I'm asking if it's about coding. Maybe not all cluster moves like you have check on yours. Can some one with a cluster that the ring works, send me trc file?
	Appreciate 0 Quote

02-14-2016, 10:21 AM	#4
Sensible_ Colonel 529 Rep 2,505 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	The feature you refer to was cancelled on e90. I'd bet if you took the cluster apart it will be without the motor on the rev side compared to the cruise ring... I guess M3 cluster has it, maybe also Alpina? Read here for info: http://www.e90post.com/forums/showthread.php?t=43606
	Appreciate 0 Quote

02-14-2016, 10:33 AM	#6
Sensible_ Colonel 529 Rep 2,505 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	You have a link? I personally have never seen an e90 (not m3) rev marker move before. I'm not doubting you but I'd be interested to see it. If indeed the motor is present, you need to check this, then perhaps it was possible with some early KOMBI / DDE firmware (datens), I don't know though...
	Appreciate 0 Quote

02-14-2016, 11:02 AM	#7
Dtype First Lieutenant 36 Rep 398 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	Check here: http://www.e90post.com/forums/showth...hlight=cluster
	Appreciate 0 Quote

02-14-2016, 04:35 PM	#9
Dtype First Lieutenant 36 Rep 398 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	Check that redline is different between some of the photos.
	Appreciate 0 Quote

02-15-2016, 11:00 AM	#10
Dtype First Lieutenant 36 Rep 398 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	So it seems I was make a little bit confusion. My friends car is a 535d not a 335d. It was my mistake. Thanks to all anyway
	Appreciate 0 Quote

01-05-2021, 04:27 AM	#13
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	@LMB335IS would know exactly __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote