Any other parts needed for upgraded turbos?

rocksandblues · 01-28-2020, 07:54 PM

140k miles
Fbo jb4 map 5

Original turbos have done a valiant job but are rattling up a storm and they are sticking open and then limp on the rare stab the go pedal

Would get something stage 2 although I only want 500hp or so

Question is : What other parts or pieces do I need to
Install upgraded turbos? Will they come w kits?

ragingpanda · 01-28-2020, 07:58 PM

If you don't have inlets, this would be the time to get them when you install upgraded twins. Be sure to order an installation gasket kit when you order as well. Since you will be dropping the subframe to install turbos, you might as well check the oil pan gasket for any leaks and replace accordingly.

WoodE30 · 01-28-2020, 11:23 PM

I'd recommend inlets/outlet and stage 2 lpfp. Wouldn't hurt to get some eldor coils and n20 plugs

Chris@VargasTurboTech · 01-29-2020, 12:14 AM

Inlets. Outlets are optional -easy to install at the time though. Change vac lines while at it. Easy access to waterpump/thermostat if you're near expected end of life.

LPFP.

rocksandblues · 01-29-2020, 06:39 PM

I have already done upgraded inlets and dp

Understand on the lpfp. Jumping up to this stage is like pulling string on an old sweater.....

Inline lpfp ok? Fuel it?

Thanks guys

WoodE30 · 01-29-2020, 06:55 PM

Quote:

Originally Posted by rocksandblues

I have already done upgraded inlets and dp

Understand on the lpfp. Jumping up to this stage is like pulling string on an old sweater.....

Inline lpfp ok? Fuel it?

Thanks guys

Do the intank fuel it upgrade, I did stage 2, wish I had done stage 3 though.

Andrew3424 · 01-29-2020, 10:04 PM

Always upgrade for the future. You might find yourself getting bored with 500 hp and wishing you went with a complete build

ErvGotti · 01-30-2020, 11:38 PM

Along with what everyone recommended, I replaced my oil and coolant feed and return lines, couple hundred buck for piece of mind.

mweisdorfer · 02-01-2020, 07:37 AM

If going stage 2 turbos, you will need new coils & plugs. Eldor coils are the newest. NKG step 2 colder plugs gapped at .018 is advisable. Stage 2 LPFP has s a must. The OEM LPFP won't be able to keeps up with stage 2 turbos.

Knerr · 02-01-2020, 03:05 PM

Are you sure the upgraded inlets you bought will fit your new turbos? if they are stock sized, they may not if the upgraded twins you buy have 2" inlets.

01-28-2020, 07:54 PM	#1
rocksandblues Private 21 Rep 61 Posts Drives: e93,e46,e36,sl500,f250 Join Date: Feb 2019 Location: va iTrader: (0)	Any other parts needed for upgraded turbos? 140k miles Fbo jb4 map 5 Original turbos have done a valiant job but are rattling up a storm and they are sticking open and then limp on the rare stab the go pedal Would get something stage 2 although I only want 500hp or so Question is : What other parts or pieces do I need to Install upgraded turbos? Will they come w kits?
	Appreciate 0 Tweet Quote

01-28-2020, 07:58 PM	#2
ragingpanda Banned 321 Rep 751 Posts Drives: 135i Join Date: May 2012 Location: Florida iTrader: (0)	If you don't have inlets, this would be the time to get them when you install upgraded twins. Be sure to order an installation gasket kit when you order as well. Since you will be dropping the subframe to install turbos, you might as well check the oil pan gasket for any leaks and replace accordingly.
	Appreciate 0 Quote

01-28-2020, 11:23 PM	#3
WoodE30 Capt. Maverick 59 Rep 295 Posts Drives: 89 E30 325is, E92 335i N54 Join Date: May 2018 Location: Los Angeles iTrader: (0) Garage List 2013 X5 3.5xdrive [0.00] 1989 325is [0.00] 2008 335I coupe [0.00]	I'd recommend inlets/outlet and stage 2 lpfp. Wouldn't hurt to get some eldor coils and n20 plugs
	Appreciate 0 Quote

01-29-2020, 12:14 AM	#4
Chris@VargasTurboTech Lieutenant Colonel 1932 Rep 1,532 Posts Drives: All Things TurboCharged Join Date: May 2016 Location: Bay Area iTrader: (0)	Inlets. Outlets are optional -easy to install at the time though. Change vac lines while at it. Easy access to waterpump/thermostat if you're near expected end of life. LPFP.
	Appreciate 0 Quote

01-29-2020, 06:39 PM	#5
rocksandblues Private 21 Rep 61 Posts Drives: e93,e46,e36,sl500,f250 Join Date: Feb 2019 Location: va iTrader: (0)	I have already done upgraded inlets and dp Understand on the lpfp. Jumping up to this stage is like pulling string on an old sweater..... Inline lpfp ok? Fuel it? Thanks guys
	Appreciate 0 Quote

01-29-2020, 10:04 PM	#7
Andrew3424 Private First Class 10 Rep 111 Posts Drives: 08 e92 335i Join Date: Apr 2014 Location: Long island iTrader: (0)	Always upgrade for the future. You might find yourself getting bored with 500 hp and wishing you went with a complete build
	Appreciate 0 Quote

01-30-2020, 11:38 PM	#8
ErvGotti Major 124 Rep 1,362 Posts Drives: 2008 135i 6MT Join Date: Jul 2010 Location: Aviano iTrader: (5) Garage List 2008 135i [6.00]	Along with what everyone recommended, I replaced my oil and coolant feed and return lines, couple hundred buck for piece of mind.
	Appreciate 0 Quote

02-01-2020, 07:37 AM	#9
mweisdorfer Major General 1903 Rep 6,968 Posts Drives: 2007 Black/Black 335i e90 Join Date: Apr 2011 Location: Holly, MI iTrader: (0) Garage List 2007 BMW E90 335i [0.00] 2008 bmw x5 [0.00]	If going stage 2 turbos, you will need new coils & plugs. Eldor coils are the newest. NKG step 2 colder plugs gapped at .018 is advisable. Stage 2 LPFP has s a must. The OEM LPFP won't be able to keeps up with stage 2 turbos.
	Appreciate 0 Quote

02-01-2020, 03:05 PM	#10
Knerr I Have A Condition 106 Rep 118 Posts Drives: 2007 6MT 335i upgraded twins Join Date: Oct 2019 Location: Craiova, Romania iTrader: (0)	Are you sure the upgraded inlets you bought will fit your new turbos? if they are stock sized, they may not if the upgraded twins you buy have 2" inlets.
	Appreciate 0 Quote