Sponsored by The Tire Rack

[Ehwnnc]

Ive looked and cant find shit. I have an 06 325 and i am wanting to run a 18x9.5 all the way around. The wheels i am getting are not offered in a 9in. Is anyone running this set up? I know i will need to roll and pull the fenders but i just dont want it to be too much. I can do a 8.5 all the way around but i dont think i will be able to achieve the offset that i would prefer. I dont like the staggered look so thats out of the question.

Input would be greatly appreciated

[MonacoBlueE90]

Originally Posted by Ehwnnc

Ive looked and cant find shit. I have an 06 325 and i am wanting to run a 18x9.5 all the way around. The wheels i am getting are not offered in a 9in. Is anyone running this set up? I know i will need to roll and pull the fenders but i just dont want it to be too much. I can do a 8.5 all the way around but i dont think i will be able to achieve the offset that i would prefer. I dont like the staggered look so thats out of the question.

Input would be greatly appreciated

Totally possible. I have 18x9.5 all around.

http://www.e90post.com/forums/showthread.php?t=732577

Few things tho and remember this is in my case.

My front offset is 35 which is 2mm away from front strut.I have driven like 3 months like that its not a problem . If you have coilovers you need spacers like 5mm.Im lowered 35mm front and 20mm rear with Hr lowering springs.

Haven´t done any modifications to front fender. I just use 235/40/18 tyre.It fits without problems.

For the rear my offset is 22 and i have 235/40/18 tyre. No rubbing and no fender roll or anything else, but if you´re going to use wider tyres with offset like that you probably need to do sligth fender roll.

Here is few other examples
18x9.5 et27 front and et10 rear
http://www.stanceworks.com/forums/sh...d.php?p=525546

18x9.5 et22 front
http://www.e90post.com/forums/showpo...&postcount=251

Same car as above just more pictures
http://www.e90post.com/forums/showthread.php?t=737286

[PSUSMU]

You don't need to roll and pull the fenders to fit 9.5"s