[E92TiAg335i]

Hey guys.

I currently have an LCI m-sport e92.


My car is m sport, so it came with Style 230m wheels (19x8,19x9) and they're currently on 225/35/19 and 255/30/19 tires...

I do NOT want to roll fenders or deal with any of that. I just want to put wheels on and drive...

If i purchase VMR v710 19x8.5 et35 and 19x9.5 et45 and put them on different 225/35/19 and 255/30/19 tires, will it rub?

Would I be better off getting VMR v710 19x8.5 et20 and 19x9.5 et33 and putting them on 225/35/19 and 255/30/19 tires?


I'm not good with fitment.

Thanks in advance!

[snedanator]

Et20 is a bit aggressive for the front... probably best sticking with the 8.5 et35 which is perfect for the front. And also et33 is fine for the rear. U could put a 235/35/19 in the front if u wish... it will look slightly better. :-)

[E92TiAg335i]

Originally Posted by snedanator

Et20 is a bit aggressive for the front... probably best sticking with the 8.5 et35 which is perfect for the front. And also et33 is fine for the rear. U could put a 235/35/19 in the front if u wish... it will look slightly better. :-)

I would definitely do the 235 in the front, however, I currently have 2 225/35/19's sitting in my storage room... Would love to just buy 2 rears and wheels as I'm selling my current 230m's.

[agustincuenca]

I believe it won't rub. I have 18x9.5 et35 in hte rear and with a 10mm spacers does not rub and my car is on coilovers and it's lowered to half the perch allows me. On oem sport suspension I don't think you'll have an issue.
255 will fit in the rear I have the same with but I think 265 is optimal.

[E92TiAg335i]

Originally Posted by agustincuenca

I believe it won't rub. I have 18x9.5 et35 in hte rear and with a 10mm spacers does not rub and my car is on coilovers and it's lowered to half the perch allows me. On oem sport suspension I don't think you'll have an issue.
255 will fit in the rear I have the same with but I think 265 is optimal.

Interesting...

Why don't you think i'll rub on the OEM M-sport suspension?

[maxoutput]

Because he’s lower on coil overs probably

[E92TiAg335i]

Originally Posted by maxoutput

Because he’s lower on coil overs probably

I'm not speaking in terms of height, but rather my fenders being rolled (or lack of them not being rolled in this case). I'm wondering if I can have the same fitment, but on stock suspension with no fender rolling work.

[agustincuenca]

Originally Posted by E92TiAg335i

I'm not speaking in terms of height, but rather my fenders being rolled (or lack of them not being rolled in this case). I'm wondering if I can have the same fitment, but on stock suspension with no fender rolling work.

You won't have to roll the fenders with your setup, that was my point.
Mine is lowered 1+ inches and with 10mm spacers, wheels et 33 and 255 tires and it does not rub at all.