|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
M3 rep (e92) bumper brake ducts
|
|
01-08-2020, 02:32 PM | #2 |
Colonel
2123
Rep 2,758
Posts |
Why does it look much smaller than the actual openings, or is it just the pics making it looks that way?
I used OEM M3 ducts and just modified the backs of them to fit inside the rep bumper. |
Appreciate
0
|
01-08-2020, 09:43 PM | #3 | |
Captain
433
Rep 780
Posts |
Quote:
(The ducts are for the e92 (my car), despite the attached picture being an e90) |
|
Appreciate
1
IllSic_Design2122.50 |
01-08-2020, 09:46 PM | #4 |
Colonel
2123
Rep 2,758
Posts |
Ahh cool, I see now. Yeah I have a front lip so these wouldn't work for me. Cool idea though, I'm sure you'll find some people interested if you sell them
|
Appreciate
0
|
01-08-2020, 09:51 PM | #5 |
Captain
433
Rep 780
Posts |
I'm going to make my own lip/under tray so it will be flat, leaving the gap. So I decided to make brake ducts to utilize the gap.
|
Appreciate
1
IllSic_Design2122.50 |
01-11-2020, 01:07 PM | #8 |
Captain
433
Rep 780
Posts |
First one done the second is printing now
|
Appreciate
1
IllSic_Design2122.50 |
01-14-2020, 05:23 PM | #11 |
Captain
433
Rep 780
Posts |
So these I made as a prototype/personal set and I have orange accents. I doubt I'll reprint or paint them black. If I decided to sell, I'd do either a vacuum form or fiberglass.
|
Appreciate
1
IllSic_Design2122.50 |
01-18-2020, 10:49 PM | #12 |
Captain
433
Rep 780
Posts |
So the long and short of the situation is that the passenger side will get done.
Potential production: We had a design that allow me to make additional fiberglass scoops. That may be an issue. Because they were designed on software owned (licensed) by my job, it may be technically owned by them. So I don't know where I'm at yet as far as that goes. With that said, I don't know if there's interest any way. |
Appreciate
0
|
02-22-2020, 09:56 AM | #13 |
Major General
1900
Rep 6,968
Posts
Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI
|
You should create a brake duct that will fit on the M3 rep bumper with the fog lights. Design it to fit between the fog light and the inner edge of that part of the bumper.
|
Appreciate
0
|
02-26-2020, 09:26 AM | #14 |
Captain
433
Rep 780
Posts |
That would be where an oil cooler duct would likely need to be. And unfortunately I no longer work where I have access to it.
With that said, a buddy of mine that's still there is wrapping up the second print! |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|