[Markus8291]

Hey guys,

Last night I coded the Sport display on my 2011 335i and it shows up fine (picture attached) but for some reason the dials don't move when I'm driving. Also I could not find where I change it to hp and tq. I looked in the KOMBI part, where it's supposed to be but it wasn't there. Has anyone done this?

Thanks!

[rimlaban7]

I have tried this on my 335d as well. Same result as yours - the gauges are there, but no movement. Wish I had better news. Let me know if you make it work!

[Markus8291]

Originally Posted by almirb20

I have tried this on my 335d as well. Same result as yours - the gauges are there, but no movement. Wish I had better news. Let me know if you make it work!

Getting the gauges to display is only the first step. There's still some stuff that has to be changed in the KOMBI module. I'll try to tackle that tonight and share my results.

[rimlaban7]

Originally Posted by Markus8291

Getting the gauges to display is only the first step. There's still some stuff that has to be changed in the KOMBI module. I'll try to tackle that tonight and share my results.

Ah, I did not know KOMBI is involved in controlling this. I have read that on F30 cars simply enabling the CIC setting is enough.

[Markus8291]

Originally Posted by almirb20

Ah, I did not know KOMBI is involved in controlling this. I have read that on F30 cars simply enabling the CIC setting is enough.

Yeah the problem is that with just enabling it in CIC it shows up but no info is being sent to the display on the E90. I should be able to change it to show HP and TQ as well

[cn555ic]

Doesnt work for the E9X..

[Joey911]

News?