[scheherazade]

bump

-scheherazade

[scheherazade]

bump

-scheherazade

[jake89714]

still have catch can?

[scheherazade]

Yes.

-scheherazade

[doubled87]

wiil u ship exhaust if buyer covers expenses? lmn ill pay>

[scheherazade]

bump

-scheherazade

[scheherazade]

bump

-scheherazade

[onefastman]

What is left op?

[onefastman]

Also my friend has a gtr too

What have you done to it so far and what would you recomend as an exhaust other than the 6K cat backs?

Also any dp fix needed with dp's?

[scheherazade]

Originally Posted by onefastman

What is left op?

First post is kept up to date. See the listed items.

Originally Posted by onefastman

Also my friend has a gtr too

What have you done to it so far and what would you recomend as an exhaust other than the 6K cat backs?

Also any dp fix needed with dp's?

I'm leaving it alone for a while.
I'm excited to have a car that I can just enjoy and not worry about fixing.

I've only followed the modding section of NAGTROC loosely. This is what I would summarize (This is all IIRC).

Step 1 is a mid pipe and a COBB AP.
It's a cheap ~500 awhp.
(I considered this, as it's pretty basic.)

Then actuators, intake, DPs, injectors, pump.
That should get you to ~600's awhp.
Note : Intake includes MAF replacement.

Then it gets really expensive. I'd only go farther after the car is older and cheaper, and the modding market has followed the depreciation.

(Or you just need to hemorrhage money. In which case, drop it off at a tuner and pick it up with 900 awhp.).

-scheherazade

[scheherazade]

bump

-scheherazade

[tufgsd]

What is the size of the oil cooler housing, the setrab part?

Originally Posted by scheherazade

Parting out as the car has been sold.
(Gunmetal GTR is here : http://www.flickr.com/photos/3011456...7624447836878/).




Local only - DC metro area - NOVA




I threw in some 'installed' prices for those who are interested (I.E. I can install these for you when you buy locally).

My install prices are not market based, they are just what I'd charge to spend my personal time on it.

This includes me showing you how and why to do what, so you never need pay someone to do it for you again.








Rear carrier with Wavetrac LSD - $2600
*** 6MT ***
(This is the ENTIRE PUMPKIN, not just the LSD. No work required. Just take it to a shop and it's a clean swap. You can keep your stock rear end to go back to stock later on, and re-sell the full pumpkin.).
Built at PTuning in Manassas Virginia, using spare OEM 6MT carrier and Wavetrac LSD from HPAutowerks.
Pic : http://www.flickr.com/photos/3011456...7624323107691/




Procede V4 - $ 750
(Will install this for $50)
Pic : http://www.flickr.com/photos/3011456...7624323107691/




RR catch can - $ 50
(Will install this for $50)
Pic : http://www.flickr.com/photos/3011456...7624323107691/




Top Speed exhaust - $ 200 (never installed)
Note, I cut the flange at the DP end, separating two pipes from each other (each pipe can flex independently). This was done to relieve stress on the DPs, as the exhaust was pulling on the DPs too much.
Install was aborted because it does not fit an XI - transfer case is in the way.
Pic : http://www.flickr.com/photos/3011456...7622852039689/




AR oil cooler - $725 (new, never used.)
Needs oil filter housing, thermostat, to complete install.
http://www.ardesign.info/catalog/ard...ge1-p-191.html
(no pics at the moment)




KW V3 coilovers - $ 1100
THIS IS FOR XI ONLY
(On the lock ring of one front coilover - the "lock bolt" thread has been re-threaded, as the original thread was stripped. Uses a different size bolt now. See this pic to know what the lock ring bolt is : http://media.photobucket.com/image/c...g/P1010077.jpg)
NOTE : KW V3 squeak. If you can't take squeaks when you go over bumps, these are not for you.
Pic : http://www.flickr.com/photos/3011456...7624323107691/




KMAC Stage 2 camber places - $ 100
Pic : http://www.flickr.com/photos/3011456...7624323107691/




Spare set of 335 TD03 turbos - $ 225
Purchased from a turbo reseller with supposedly less than 1000 miles on the originating car.
No trauma on visual inspection.
Were going to be used as a core for an upgrade.
(no pics at the moment)





PM for contact info.

No shipping. This is all local.
Face-to-face sales only.
I don't care if it takes a year to sell this stuff.



Pics of my 335.
http://www.flickr.com/photos/3011456...7624145683217/

Pics of the parts.
http://www.flickr.com/photos/3011456...7624323107691/

Pics of the gtr.
http://www.flickr.com/photos/3011456...7624952632028/
http://www.flickr.com/photos/3011456...7624447836878/







BT cable, enthusiast version - $ 200 [SOLD]
(1 code has been used. 2 slots are free)
(No pic at the moment)


Forge Diverter Valves (DVs) (silver) - $ 100[SOLD]
(Will install this for $25)
Pic : http://www.flickr.com/photos/3011456...7624323107691/


UR intake (cropped, single cone) - $ 50[SOLD]
(Will install this for $25)
Cropped means, that it does NOT go down into the wheel well. It remains in the engine bay like the DCI intakes. The main pipe has a single cone intake stuck onto it.
I did this because the pipe bends are smooth, and its a lot easier to install than the DCI intakes (because the filter is not in your way).
Pic : http://www.flickr.com/photos/3011456...7624323107691/


AMS IC - $ 700 [SOLD]
(Will install this for $150)
Pic : http://www.flickr.com/photos/3011456...7624323107691/


AR 3" -> 2.5" tapered DPs (XI) - $ 675 (New, never used) [SOLD]
http://www.ardesign.info/catalog/ard...pes-p-188.html
(no pic at the moment)


-scheherazade

[scheherazade]

Originally Posted by tufgsd

What is the size of the oil cooler housing, the setrab part?

Here are two threads by AR about their oil cooler offerings.

http://www.e90post.com/forums/showth...ght=oil+cooler

http://www.e90post.com/forums/showth...ght=oil+cooler


I got this pic from one of the threads I linked :


AFAIK I have the front mount version.

-scheherazade

[migue90]

interested in cc - 60 shipped to 07643?

[scheherazade]

Originally Posted by migue90

interested in cc - 60 shipped to 07643?

Not ready for shipping.
Sorry.

-scheherazade

[scheherazade]

bump.

-scheherazade

[scheherazade]

bump

-scheherazade

[scheherazade]

bump

-scheherazade

[Shieldze1025]

PM'd for exhaust. I live in Tyson's Corner.

Just curious, what are the hols drilled in the tips for?

[scheherazade]

Exhaust is sold.

Bump.

-scheherazade

[Shieldze1025]

Thanks for the exhaust, sounds great.

[scheherazade]

Originally Posted by Shieldze1025

Thanks for the exhaust, sounds great.

Sweet. I'm glad you like it

-scheherazade