Coding Out Bi Xenon

Doesha · 07-22-2018, 01:55 AM

2006 330i E90 Pre Lci N52

Question:
Wanted to know if anyone has some information on coding out the Bi Xenon's.

Issue:
I'm still having issues with my passenger low beam randomly not turning on. I've replaced bulbs and ballasts and have no wires exposed/dried out. Randomly it just won't turn on and randomly it will work for 2 days then same issue.I have coded out the Adpative error due to the one adaptive module having water damage and the issue is still there with low beam. My AE turn on just fine and fogs work as-well. I take a look at INPA and no errors at this point show up for anything. Before I was just getting an Adaptive Error. Only when passenger low beam didn't turn on do I get error for that otherwise when it does work no error.

Plan:

I want to code out the Bi Xenon's to use an aftermarket HID DS1 ballast. I know I can get then and bipass the whole Bi Xenon ballast. This technically should fix the issue with low beam randomly not working. I know I can do it without coding out the Xenon's but I don't want to see all the lights on my dash.

Also I want to put a H7 HID kit on the inners to have both of them turn on when I turn my Low Beams on.

This should be possible theoretically, am I wrong? Any input would help thanks.

paolotonzini · 07-22-2018, 07:35 AM

Have you seen this vid might help

Doesha · 07-22-2018, 11:12 AM

Quote:

Originally Posted by paolotonzini

Have you seen this vid might help

Thanks I will check it out when I get to work.

Doesha · 07-22-2018, 12:01 PM

Quote:

Originally Posted by paolotonzini

Have you seen this vid might help

Ok watched the video. I have already coded out the Adaptive. I no longer get an errorIm just having issues with the passenger Xenon not always firing.

Doesha · 07-22-2018, 12:05 PM

BTW

My lights are as follows:

Auto on knob will still Flash Green LED. but I get Low Beams and Angel Eyes on when I'm in Auto. My High Beams are still able to use Shutters to Use Xenon's as High Beams.

When I go to the Right which I think is DRL. I get Angel Eyes and Amber Corners. I push Stalk nothing happens, I pull Stock I get my inner H7 Bulbs as a Flash To Pass.

All The way to the right Once again it Turns my Lows on, Highs will be Xenon's and my angel Eyes.

My Fog lights work in any mode just by pushing the Switch. I do have H9 for Fog now that I have a M3 Rep front bumper.

07-22-2018, 01:55 AM	#1
Doesha Private First Class 30 Rep 188 Posts Drives: 2006 330i Pre-LCI Monaco Blue Join Date: May 2018 Location: Orange County, California iTrader: (0)	Coding Out Bi Xenon 2006 330i E90 Pre Lci N52 Question: Wanted to know if anyone has some information on coding out the Bi Xenon's. Issue: I'm still having issues with my passenger low beam randomly not turning on. I've replaced bulbs and ballasts and have no wires exposed/dried out. Randomly it just won't turn on and randomly it will work for 2 days then same issue.I have coded out the Adpative error due to the one adaptive module having water damage and the issue is still there with low beam. My AE turn on just fine and fogs work as-well. I take a look at INPA and no errors at this point show up for anything. Before I was just getting an Adaptive Error. Only when passenger low beam didn't turn on do I get error for that otherwise when it does work no error. Plan: I want to code out the Bi Xenon's to use an aftermarket HID DS1 ballast. I know I can get then and bipass the whole Bi Xenon ballast. This technically should fix the issue with low beam randomly not working. I know I can do it without coding out the Xenon's but I don't want to see all the lights on my dash. Also I want to put a H7 HID kit on the inners to have both of them turn on when I turn my Low Beams on. This should be possible theoretically, am I wrong? Any input would help thanks.
	Appreciate 0 Tweet Quote

07-22-2018, 07:35 AM	#2
paolotonzini New Member 0 Rep 18 Posts Drives: 335i Join Date: Jul 2018 Location: fl iTrader: (0)	Have you seen this vid might help
	Appreciate 0 Quote

07-22-2018, 12:05 PM	#5
Doesha Private First Class 30 Rep 188 Posts Drives: 2006 330i Pre-LCI Monaco Blue Join Date: May 2018 Location: Orange County, California iTrader: (0)	BTW My lights are as follows: Auto on knob will still Flash Green LED. but I get Low Beams and Angel Eyes on when I'm in Auto. My High Beams are still able to use Shutters to Use Xenon's as High Beams. When I go to the Right which I think is DRL. I get Angel Eyes and Amber Corners. I push Stalk nothing happens, I pull Stock I get my inner H7 Bulbs as a Flash To Pass. All The way to the right Once again it Turns my Lows on, Highs will be Xenon's and my angel Eyes. My Fog lights work in any mode just by pushing the Switch. I do have H9 for Fog now that I have a M3 Rep front bumper.
	Appreciate 0 Quote