[vanondemand]

Has anyone install a Laser Interceptor Quad system on their e90?
I'm trying to figure out where to run the rear shifters wires through

[hurricane56]

Run the wires to the corner of the trunk lid where the factory wire loom enters connects to the body of your car. Modify the rubber wire protector by using a razor blade to cut a small notch for the cables to exit the trunk lid. Do the same for the other end of the rubber boot.

[upstatedoc]

I'm assuming you have yours mounted under the trunk lip. I've got mine under the brake lights and the wires go through the lamp housing.

Just checked under the trunk lip. The lift handle seems soft so you may be able to cut a hole and run them through there.

[vanondemand]

Originally Posted by upstatedoc

I'm assuming you have yours mounted under the trunk lip. I've got mine under the brake lights and the wires go through the lamp housing.

Just checked under the trunk lip. The lift handle seems soft so you may be able to cut a hole and run them through there.

Not sure how you have them under your brake light, pics?

[upstatedoc]

Originally Posted by vanondemand

Not sure how you have them under your brake light, pics?

Oh i have lots of pics now if i could only download them to this sight.

I used the mounting brackets from LI, one end of the bracket sits flush between the tail light housing and the sheetmetal. After having them this way for some time though its not the best mounting position. My son has already bumped into them twice and bent them. If I had to do it all over again I would put them under the trunk lip.

[vanondemand]

Yeah I don't think that's an ideal place for me to mount. It'll be I'm the corner for my trunk lip right above the plate, just figuring out where to loop the wires through