|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Need Audio Help, MS8 + Alpine PDX 4.100
|
|
10-15-2012, 07:52 AM | #1 |
Colonel
96
Rep 2,204
Posts |
Need Audio Help, MS8 + Alpine PDX 4.100
Dear Friends,
Have already posted in Audio thread but in case some of you clever people from the UK dont go to that thread - need some advice, My current Audio setup includes, Front Stage = Logic 7 Mids and Tweets Centre = Logic 7 mid and tweet Rear Stage = Logic 7 mids Subs= Earthquake SWS8's Processor= JBL MS8 Amp = Alpine PDX4.100 So I fitted the Amp and the subs at the weekend with a view on the amp running the front stage and the subs. My primary question is that the amp has its own crossovers and filters. I have set the filters on the channels to 'off' and the crossover on the sub channels to 40Hz and the front stage to 150hz. Am I doing this right ? What should I set the crossovers to ? Should I turn the filters off, asumption that the MS8 shoudl do this work ? On the MS 8 I have set the crossover point at 40HZ for low pass and the high pass at 200HZ. I have arranged the speaker set up as: FL + FR as 1 way 200HZ 24DB Centre as 1 way 200HZ 24DB Rears as 1 way 200HZ 24 DB Subs x 2 30HZ 12DB Any pointers warmly welcomed - especially with respect at what I should set the amp crossovers at and whether I should be using the filters on the amp ? Thanks for reading !!
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
10-15-2012, 02:59 PM | #2 |
Colonel
96
Rep 2,204
Posts |
Ok, update.
Ive set the MS8 up with teh following: FL+FR 1 way 150HZ 24db Center 1 way 150Hz 24db SL+SR 1 way 150Hz 24DB Sub1&2 30hz 12 db I have some great staging across the front now but find the subs very 'boomy' and the fronts mids are struggling as they pop. Not sure what is the RMS for a Logic 7 mid ? I have 100 RMS going to fronts with the AMP gain turned down to a third but they still pop. Set the MS8 up at -30 and now have it at -6. Head Unit was set to about 42 clicks at calibaration. Any ideas or is it a case of the Logic 7 mids now not keeping up ?
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-15-2012, 03:57 PM | #3 | ||
Major General
886
Rep 9,097
Posts |
Quote:
You answered your question. Quote:
I guess you are referring 30Hz as subsonic filter. (correct me if I am wrong). You will get better sound if you setup front / subs at 120hz @24db, BUT be careful when you set your gains on your speakers. I would set the gains of amp to 20% and let MS-8 do its job. HTHs.
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play |
||
Appreciate
0
|
10-15-2012, 06:04 PM | #4 |
Colonel
96
Rep 2,204
Posts |
Hi Mate,
Thanks for the response, Some questions if I may: Fronts and subs are setup differently. ie my fronts are 1 way NOT 2 way. So I setup subs as 30hz subsonic filter 12db slope. How do you set gains on speakers ? I thought you set gains on amps ? Why set the sub channel to 20% of the 100w RMS ? The Eartquakes are rated at 300w max so surely they can take 100w RMS ? If the L7's are rated at 75w RMS why set the amp at 20% for that channel ? I am confused by your kind response mate. I think you are reffering to setting up the front channel as 2 way ? I could be (and probably am) wrong.
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips Last edited by lolololol; 10-15-2012 at 06:10 PM.. |
Appreciate
0
|
10-16-2012, 06:27 AM | #5 | ||||
Major General
886
Rep 9,097
Posts |
Quote:
You mentioned sub sonic filter (30Hz) but what sort of frequency are you using for subs? Quote:
On lower gains, less chances of static / hiss, unless your amp if of very high quality. Also don't forget that gain is the way to control how much 'input' are you using to reach max power of amp. Quote:
MS-8 will do most of the job for you. If you are not sure, get it installed professionally, or use voltmeter to check if your gains are adjusted as per your driver's abilities. Quote:
Personally I get better results with SWS-8s when setup as subs on MS-8s.
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play |
||||
Appreciate
0
|
10-16-2012, 09:52 AM | #6 |
Colonel
96
Rep 2,204
Posts |
Thanks again mate,
I prefer the SWS8'sm setup as subs and not part of fronts on 2 way. I will have a go at turning down the gains and see how I get on. Not sure what frequency for subs - I will check tonight. Its seems that you have a very similar setup to mine, I also notice your amp is similalry powered, It seems you are happy with your setup - can you share with me what you setup looks like in MS8 ? I am keen to understand if you have changed tone / graphic / input control for sub / cntr etc obviously need to know what crossover / slopes etc you are using. If you can share that data it woudl be appriacted fella. In terms of professional install - I have eveyrthing installed its just a matter of playing with teh settings now - if you know of anyone in teh London / Berks / Bucks area I woudl be interested to know,. Thanks buddy.
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-16-2012, 12:38 PM | #7 | |||
Major General
886
Rep 9,097
Posts |
Quote:
Quote:
I am happy with HU---> Amp. Quote:
Great to see that you installed it. Have a play with settings and you will be good to go.
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play |
|||
Appreciate
0
|
10-16-2012, 12:48 PM | #8 |
Colonel
96
Rep 2,204
Posts |
Sorry mate im lost - a simple list of your settings would be of great help ?
i.e. do you have the subs set as part of the fronts or on their own ? Your comment 'have a play with settings and you are good to go' doesnt really help mate as that is what I am doing and getting effing frustrated - its almost too many options lol.
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-16-2012, 01:21 PM | #9 |
Colonel
96
Rep 2,204
Posts |
Ok,
Just tried, Subsonic filter 30HZ Sub / Front Crossover 120hz FL+FR 120HZ 24db Centre 120hz 24db Sides 120hz 24db Sub1+2 24db AMP gains at min, ........................and its sounds SHITE ! The front mids (when turned up just seem to pop) and distort. Ready to sack all this kit tbh - next time factory fit for me only !! I had a full Logic 7 system in my previous 35d and it was spot on !
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-16-2012, 02:03 PM | #10 | |
Major General
886
Rep 9,097
Posts |
Quote:
Few Questions. 1- Are you skipping the calibration process or are you using sound CD to setup the calibration? 2- What volume level of MS-8 are you using for calibration level? 3- If I am not wrong, only your front mids and SWS-8s are connected to alpine PDX 4.100, and rest to MS-8. IF yes, try these. Try these settings: Subsonic filter 40HZ Sub / Front Crossover 120hz FL+FR 120HZ 24db Centre 150hz 24db Sides 150hz 24db Sub1+2 24db You can also try these settings with MS-8 volume on 21 while calibration and then 30-35 db to see which one works out better. MS-8 is right bitch to setup properly and TBH, hence I never liked / bought one. But if somebody wants one, I'd recommend it as it can be setup by anybody if done properly.
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play |
|
Appreciate
0
|
10-16-2012, 02:38 PM | #11 |
Colonel
96
Rep 2,204
Posts |
Bitch aint the word fella !!
So in answer to your Q's 1) I am doing factory reset and complete install each time with CD etc etc 2) I am calibarating at -30 and then truning up to -6 after in normal listening mode. 3) My fronts are L7 mids & tweets !! The PDX (amp) is running FL+FR & Sub 1 + Sub 2 Doing my swede in this is !!! Thanks for help tho mate !!
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-16-2012, 02:55 PM | #12 | |
Major General
886
Rep 9,097
Posts |
I really need to spend few days and play with certain settings.
Is your complaint popping mids? or distorted subs? See my response in bold. Quote:
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play |
|
Appreciate
0
|
10-16-2012, 03:01 PM | #13 |
Colonel
96
Rep 2,204
Posts |
Ill give it a go mate and try different volumes and gains as you kindly provided- had enough tonight tbh !! So will revert back tomorrow.
Do you still think the below is the right setup for crossovers and slopes ?: Subsonic filter 40HZ Sub / Front Crossover 120hz FL+FR 120HZ 24db Centre 150hz 24db Sides 150hz 24db Sub1+2 24db OR ......I currently have all speakers @ 24db slopes and crossovers at 120hz, with 30Hz subsonic. So which should it be buddy ? Thanks for all your help !!
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-16-2012, 03:07 PM | #14 | |
Major General
886
Rep 9,097
Posts |
Quote:
About slopes, I cannot comment as I always used 24db. Cross over is 120Hz b/w fronts and sub. For rears and central 150Hz is safer and less distorted approach. Share your results with us. Also don't forget to experiment amp gains as mentioned above. Thanks.
__________________
F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play
F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play |
|
Appreciate
0
|
10-16-2012, 03:09 PM | #15 |
Major General
400
Rep 5,623
Posts |
Try this.
1) go into the test menu of the ms-8 (hold left right left right each for about a second, or until you see the screen flicker) 2) go to Output Identification 3) Set ms-8 volume to less than -25, say -30 4) you will see a list of all your channels. Click on the centre channel and it will play pink noise through that channel only. Note SPL at driver head position in db. You can use an iphone app for this, i use an app called dB Volume as it has a slow response so its easy to measure. Make sure you set it to C weighting. 5) click on your driver side mid/tweet channel. Adjust amp gains so it matches centre. However as this is amped even on the min gains it may be a lot higher. Note this db level. 6) repeat for driver side underseats, adjust gain and note db. 7) repeat for driver side rear mid and note db 8) hopefully at this stage most of your drivers are within 3-4 db 9) now increase the [B]ms-8 volume[B] until the SPL of your drivers is roughly 55db. To measure this just go into 2-3 of your channels like earlier 10) now try recalibrating at that volume. If you're still getting bad results try up to +3db or -3db from that calibration volume. If its still bad then bridge the amp to the woofers so the rest of your speakers level match. In my opinion this would work well. I wouldn't really advise ditching the ms-8 and amping, assuming you started off with the base spec. You can make this work, its like a marriage. Just needs a bit of effort. |
Appreciate
0
|
10-16-2012, 05:01 PM | #16 |
Colonel
96
Rep 2,204
Posts |
Thanks for replies chaps,
What's your view on crossovers and slopes for each channel Mob17 ?
__________________
Engine Mods: VF HEX Stage 2, ER Charge Pipes, VRSF Catless Downpipes, BMS Intakes and PCW Exhaust Mod
Running Gear Mods: HRE Flow Form F01, Yellow Stuff pads. Cosmetic: Performance Grill, Lip Spoiler, Splitters, Side Skirt Extensions, Diffuser and BMS Tips |
Appreciate
0
|
10-16-2012, 05:12 PM | #17 |
Major General
400
Rep 5,623
Posts |
|
Appreciate
0
|
Bookmarks |
|
|