Sponsored by The Tire Rack

[bimmerisalwaysbroken]

Hi guy's so I've just picked up some rims for my 2005 E90 330i and I was just wondering about fitment

I've got x4 19x9.5 with 2 having a et of 50 and 2 having a et of 33

I'm gonna be putting the Et33 on the front im guessing, But for the rears as it is quite a large ET I haven't been able to find anything about it online.
I'm assuming i will have to use 15m spacers on the rears and roll the fenders.

I'm also running stock suspension and brakes

[vester86]

i posted this yesterday to your other post on exactly the same question…

with these specs on the rear (without spacer) the outside of your rim sits exact te same as stock, so a 15-20mm spacer is fine without the need to roll a fender


according to my calculation the front will not fit

[TSilver335i]

Originally Posted by bimmerisalwaysbroken

Hi guy's so I've just picked up some rims for my 2005 E90 330i and I was just wondering about fitment

I've got x4 19x9.5 with 2 having a et of 50 and 2 having a et of 33

I'm gonna be putting the Et33 on the front im guessing, But for the rears as it is quite a large ET I haven't been able to find anything about it online.
I'm assuming i will have to use 15m spacers on the rears and roll the fenders.

I'm also running stock suspension and brakes

Whats your current setup? Their is some good offset calculators online.

Try https://wheelssize.com/wheel-offset/calculator/ or https://www.1010tires.com/Tools/Wheel-Offset-Calculator